# VQ into s14 Swap
**URL:** https://forums.speedlife.net/t/vq-into-s14-swap/93793
**Category:** SON240sx Automotive
**Created:** [March 13, 2006, 9:54pm UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793 "2006-03-13T21:54:24Z")
**Posts on this page:** 16
**Page:** 1
### Author:  [@CCTE\_Event\_Director](https://forums.speedlife.net/u/CCTE_Event_Director)
#### Post date: [March 13, 2006, 9:54pm UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/1 "2006-03-13T21:54:24Z")
I am guessing most people would have stumbled onto this already but here is an ongoing report of a s14 with a VQ swap going in. I have just started to read but is very intresting.
I am wondering if if could be better then an SR20 swap. The intresting parts is the engine + tranny is actually lighter then the stock KA.
Might be worth a read
---
### Author:  [@240\_Foz](https://forums.speedlife.net/u/240_Foz)
#### Post date: [March 13, 2006, 10:01pm UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/2 "2006-03-13T22:01:20Z")
I think you forgot the link?
---
### Author:  [@a\_ahmed](https://forums.speedlife.net/u/a_ahmed)
#### Post date: [March 13, 2006, 10:23pm UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/3 "2006-03-13T22:23:24Z")
VQ35DE???
Link?
I’ve seen in the past people put CA18DET, RB20DET, SR20DET, RB25DET, RB26DETT, Rotaries, 2JZGTE, even small block chevys… but never a VQ35DE if that’s the engine.
Hmm cool 🙂
---
### Author:  [@Bushido](https://forums.speedlife.net/u/Bushido)
#### Post date: [March 13, 2006, 10:30pm UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/4 "2006-03-13T22:30:31Z")
its been done before, at least ive seen pictures of a VQ30 in the engine bay on an S14. the biggest problem is you have to relocate the shifter 6 inches forward by customizing the shifter linkage.
---
### Author:  [@alesserfate](https://forums.speedlife.net/u/alesserfate)
#### Post date: [March 13, 2006, 10:44pm UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/5 "2006-03-13T22:44:34Z")
> [@Bushido](#):
>
> its been done before, at least ive seen pictures of a VQ30 in the engine bay on an S14. the biggest problem is you have to relocate the shifter 6 inches forward by customizing the shifter linkage.
i dont know exactly how much but its nowhere near as much as that, on a vg30 its like 3 inches
---
### Author:  [@CCTE\_Event\_Director](https://forums.speedlife.net/u/CCTE_Event_Director)
#### Post date: [March 14, 2006, 4:45am UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/6 "2006-03-14T04:45:05Z")
Sorry my bad. Another reason to not post when tired. LOL
[http://forums.freshalloy.com/ubbthreads/showflat.php?Cat=&Board=UBB9&Number=67952681&page=&view=&sb=5&o=&fpart=8&vc=1](http://forums.freshalloy.com/ubbthreads/showflat.php?Cat=&Board=UBB9&Number=67952681&page=&view=&sb=5&o=&fpart=8&vc=1)
---
### Author:  [@Jesse](https://forums.speedlife.net/u/Jesse)
#### Post date: [March 14, 2006, 8:14pm UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/7 "2006-03-14T20:14:42Z")
pfft vq :mamoru: :fruit:
---
### Author:  [@Theo23](https://forums.speedlife.net/u/Theo23)
#### Post date: [March 14, 2006, 8:24pm UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/8 "2006-03-14T20:24:08Z")
> [@Jesse](#):
>
> pfft vq :mamoru: :fruit:
Haha, seconded…
---
### Author:  [@B\_Hebert](https://forums.speedlife.net/u/B_Hebert)
#### Post date: [March 14, 2006, 8:44pm UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/9 "2006-03-14T20:44:02Z")
> pfft vq
> haha thirded
---
### Author:  [@CCTE\_Event\_Director](https://forums.speedlife.net/u/CCTE_Event_Director)
#### Post date: [March 14, 2006, 9:18pm UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/10 "2006-03-14T21:18:14Z")
I just thought it was an intresting swap and someone thinking outside the box. The engines can produce a lot of power it is just that the performance parts are still limited because most people with them use them on 350’s, hence the cost.
I wouldn’t write it off without at least raising an eyebrow to the idea.
---
### Author:  [@KoukiS14](https://forums.speedlife.net/u/KoukiS14)
#### Post date: [March 15, 2006, 7:37am UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/11 "2006-03-15T07:37:50Z")
> he engines can produce a lot of power it is just that the performance parts are still limited because most people with them use them on 350’s, hence the cost.
Actually the VQ35DE isnt very mod friendly. Youll get like 240-250whp with mods done to it. Sure turbo it and it makes just under 400whp but then you are looking at 10K +.
So for the work its going to take to put it in you are better off going the route that everyone and their mom has done…S…R.
Outside the box isnt always a good thing.
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [March 15, 2006, 7:45am UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/12 "2006-03-15T07:45:42Z")
RB is easier and cheaper
---
### Author:  [@Ryan\_Stock](https://forums.speedlife.net/u/Ryan_Stock)
#### Post date: [March 15, 2006, 10:57am UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/13 "2006-03-15T10:57:53Z")
- they sound like a wet fart lol :bsflag:
---
### Author:  [@a\_ahmed](https://forums.speedlife.net/u/a_ahmed)
#### Post date: [March 15, 2006, 11:32am UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/14 "2006-03-15T11:32:03Z")
Inline 6 engines sound nice…
---
### Author:  [@Bushido](https://forums.speedlife.net/u/Bushido)
#### Post date: [March 15, 2006, 12:03pm UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/15 "2006-03-15T12:03:26Z")
the VQ is superior to the RB in an s chassis as long as you have the skills to mount it. 3cyl long vs 6cyl long… WEIGHT.
have you guys ever driven a vq? they are soooo smooth. ive driven an rb25det and i can say i prefer the power delivery of the vq to the rb. now if i were going to go VQ id get myself a VQ30DET from a cefiro.
---
### Author:  [@Bushido](https://forums.speedlife.net/u/Bushido)
#### Post date: [March 15, 2006, 12:09pm UTC](https://forums.speedlife.net/t/vq-into-s14-swap/93793/16 "2006-03-15T12:09:49Z")
> [@alesserfate](#):
>
> [quote=Bushido]its been done before, at least ive seen pictures of a VQ30 in the engine bay on an S14. the biggest problem is you have to relocate the shifter 6 inches forward by customizing the shifter linkage.
i dont know exactly how much but its nowhere near as much as that, on a vg30 its like 3 inches[/quote]
VG and VQ are different animals.
> Shifter is about 6 inches back but it has a 6 inch extension piece that I can remove, it’ll take a little bit of work but shouldn’t be too bad.
>
> allen
ofcourse all this depends on how you have your motor mounted… as far back as possible will place the shifter about 6inches further back than the stock opening in an s chassis.