# VQ35 Engine **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [June 29, 2007, 10:01am UTC](https://forums.speedlife.net/t/vq35-engine/133811 "2007-06-29T10:01:42Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![xtngshZ](https://avatars.discourse-cdn.com/v4/letter/x/c6cbf5/32.png) [@xtngshZ](https://forums.speedlife.net/u/xtngshZ)\ **Post date:** [June 29, 2007, 10:01am UTC](https://forums.speedlife.net/t/vq35-engine/133811/1 "2007-06-29T10:01:42Z")
Hello, Just inquiring, I was wondering, if anyone knows exactly how much these VQ35 engines go for? Just trying to entertain the thought of swapping a VQ35 into the S14. Is there a difference between the VQ35 engine from a 350Z and a… wait, i forgot the other car, (as per jstn) there is another car that has the same VQ35 engine as the 350Z other than the G35. ---
**Author:** ![renegade141](https://avatars.discourse-cdn.com/v4/letter/r/ba8739/32.png) [@renegade141](https://forums.speedlife.net/u/renegade141)\ **Post date:** [June 29, 2007, 10:17am UTC](https://forums.speedlife.net/t/vq35-engine/133811/2 "2007-06-29T10:17:07Z")
all the 3.5 L engines of nissan and infiniti are the same. quest, altima, maxima, 350z all share the same engine. just HP differences based the parts they use, ie cylinder head, ecu, + other small things ---
**Author:** ![RealityZ33](https://avatars.discourse-cdn.com/v4/letter/r/4af34b/32.png) [@RealityZ33](https://forums.speedlife.net/u/RealityZ33)\ **Post date:** [June 29, 2007, 10:20am UTC](https://forums.speedlife.net/t/vq35-engine/133811/3 "2007-06-29T10:20:12Z")
I believe its the Max… and (IIRC) I believe there is a difference. It will cost you 7k for a non rev-up, 9k for a Rev-up and 11k - 12k for an HR engine. I dont think this includes ECU. DO THE SWAP! and get a REv-Up… gives you 300hp to the crank! ---
**Author:** ![pcproa](https://avatars.discourse-cdn.com/v4/letter/p/c5a1d2/32.png) [@pcproa](https://forums.speedlife.net/u/pcproa)\ **Post date:** [June 29, 2007, 2:06pm UTC](https://forums.speedlife.net/t/vq35-engine/133811/4 "2007-06-29T14:06:17Z")
Don’t forget to boost it at the end and get some big big HP numbers. ---
**Author:** ![XuperXero](https://avatars.discourse-cdn.com/v4/letter/x/ea5d25/32.png) [@XuperXero](https://forums.speedlife.net/u/XuperXero)\ **Post date:** [June 29, 2007, 11:11pm UTC](https://forums.speedlife.net/t/vq35-engine/133811/5 "2007-06-29T23:11:04Z")
BOOOST FTW! You can find a used non-rev up block for around 5g’s… good luck with that. Maxima and Altima with the VQ are same engine as Z’s and G’s, but more tuned for efficiency as well as under different dyno not to disgrace the Z’s and G’s. There was a Altima 3.5L at track, on the straight, we were about dead even. ---
**Author:** ![MikeP](https://avatars.discourse-cdn.com/v4/letter/m/a4c791/32.png) [@MikeP](https://forums.speedlife.net/u/MikeP)\ **Post date:** [June 30, 2007, 8:09am UTC](https://forums.speedlife.net/t/vq35-engine/133811/6 "2007-06-30T08:09:31Z")
There was someone on here selling a 350Z engine,tranny, ECU and harness for about 5000.00 I believe. I’ll see if I can find the thread. Found it : [http://www.torontonissan.ca/forums/showthread.php?t=1086](http://www.torontonissan.ca/forums/showthread.php?t=1086) I was wrong it’s only 4700.00 ---
**Author:** ![knight\_yyz](https://avatars.discourse-cdn.com/v4/letter/k/9de053/32.png) [@knight\_yyz](https://forums.speedlife.net/u/knight_yyz)\ **Post date:** [July 1, 2007, 8:11am UTC](https://forums.speedlife.net/t/vq35-engine/133811/7 "2007-07-01T08:11:08Z")
if you want used you can find one on [car-part.com](http://car-part.com) for around 2000 plus shipping IIRC there is a difference between the front wheel drive version and the rear wheel drive version of the engine. ---
**Author:** ![xtngshZ](https://avatars.discourse-cdn.com/v4/letter/x/c6cbf5/32.png) [@xtngshZ](https://forums.speedlife.net/u/xtngshZ)\ **Post date:** [July 4, 2007, 1:59pm UTC](https://forums.speedlife.net/t/vq35-engine/133811/8 "2007-07-04T13:59:33Z")
> [@RealityZ33"](#): > > I believe its the Max… and (IIRC) I believe there is a difference. > > It will cost you 7k for a non rev-up, 9k for a Rev-up and 11k - 12k for an HR engine. > I dont think this includes ECU. > > DO THE SWAP! and get a REv-Up… gives you 300hp to the crank! i have no idea what you are talking about. educate me. what is the difference between a non rev-up and a rev-up? and HR engine? * * * > [@9/1/05 Thursday in the Square](https://forums.speedlife.net/t/9-1-05-thursday-in-the-square/1802/9): > > if you want used you can find one on [car-part.com](http://car-part.com) for around 2000 plus shipping > > IIRC there is a difference between the front wheel drive version and the rear wheel drive version of the engine. [car-part.com](http://car-part.com) sounds like a myth… has anyone actually even bought parts off that site? i remember someone told me to look on that site before, when i was looking for the z32 brakes, and honestly, i didn’t find jackshhhhhhhhh… lol thanks for the suggestion though ---
**Author:** ![RealityZ33](https://avatars.discourse-cdn.com/v4/letter/r/4af34b/32.png) [@RealityZ33](https://forums.speedlife.net/u/RealityZ33)\ **Post date:** [July 4, 2007, 4:48pm UTC](https://forums.speedlife.net/t/vq35-engine/133811/9 "2007-07-04T16:48:50Z")
^Ok… I will give you the dirty basics… Non Rev-up available in model years '03-'05 (and '06 autos) 287 hp, 273 ft/lbs 6600rpm redline Rev-up available in model years '05 35th anniversary - ’ 06 MT 300hp, 260 ft/lbs 7000 redline HR available in '07 306hp \*\*\*ft/lbs (with new SAE corrections) 7500 redline Dual Throttle Body/Intake design. ---
**Author:** ![XuperXero](https://avatars.discourse-cdn.com/v4/letter/x/ea5d25/32.png) [@XuperXero](https://forums.speedlife.net/u/XuperXero)\ **Post date:** [July 4, 2007, 11:30pm UTC](https://forums.speedlife.net/t/vq35-engine/133811/10 "2007-07-04T23:30:02Z")
NON-REV UP FTMFW!!! I got more torque than Church, bwahahaha ---
**Author:** ![knight\_yyz](https://avatars.discourse-cdn.com/v4/letter/k/9de053/32.png) [@knight\_yyz](https://forums.speedlife.net/u/knight_yyz)\ **Post date:** [July 5, 2007, 2:16am UTC](https://forums.speedlife.net/t/vq35-engine/133811/11 "2007-07-05T02:16:12Z")
[http://www.car-part.com/cgi-bin/search.cgi](http://www.car-part.com/cgi-bin/search.cgi) ok ignore that it doesn’t work. There are about 40 engines available in Canada alone for 2003. ---
**Author:** ![RealityZ33](https://avatars.discourse-cdn.com/v4/letter/r/4af34b/32.png) [@RealityZ33](https://forums.speedlife.net/u/RealityZ33)\ **Post date:** [July 5, 2007, 4:44am UTC](https://forums.speedlife.net/t/vq35-engine/133811/12 "2007-07-05T04:44:35Z")
^I think the OP wanted to know if **you** , or anyone else on this board had purchased from that site before…? ---
**Author:** ![xtngshZ](https://avatars.discourse-cdn.com/v4/letter/x/c6cbf5/32.png) [@xtngshZ](https://forums.speedlife.net/u/xtngshZ)\ **Post date:** [July 5, 2007, 8:11am UTC](https://forums.speedlife.net/t/vq35-engine/133811/13 "2007-07-05T08:11:13Z")
^ that is correct. can anyone actually vouch for this site, and claim that this site actually helped them find and purchased the part that they were looking for? * * * > [@DIY: General Powdercoating basics](https://forums.speedlife.net/t/diy-general-powdercoating-basics/1834/9): > > ^Ok… I will give you the dirty basics… > > Non Rev-up available in model years '03-'05 (and '06 autos) > 287 hp, 273 ft/lbs > 6600rpm redline > > Rev-up available in model years '05 35th anniversary - ’ 06 MT > 300hp, 260 ft/lbs > 7000 redline > > HR available in '07 > 306hp \*\*\*ft/lbs (with new SAE corrections) > 7500 redline > Dual Throttle Body/Intake design. it makes sense now. who knew it would be that basic? ---
**Author:** ![xtngshZ](https://avatars.discourse-cdn.com/v4/letter/x/c6cbf5/32.png) [@xtngshZ](https://forums.speedlife.net/u/xtngshZ)\ **Post date:** [July 10, 2007, 7:10am UTC](https://forums.speedlife.net/t/vq35-engine/133811/14 "2007-07-10T07:10:26Z")
> [@RealityZ33"](#): > > I believe its the Max… and (IIRC) I believe there is a difference. > > It will cost you 7k for a non rev-up, 9k for a Rev-up and 11k - 12k for an HR engine. > I dont think this includes ECU. > > DO THE SWAP! and get a REv-Up… gives you 300hp to the crank! wow, at these prices, i might as well sell my car, and get a used 350z for about 25-30g’s… i think that would be the best option. time to start saving ---
**Author:** ![knight\_yyz](https://avatars.discourse-cdn.com/v4/letter/k/9de053/32.png) [@knight\_yyz](https://forums.speedlife.net/u/knight_yyz)\ **Post date:** [July 15, 2007, 7:26pm UTC](https://forums.speedlife.net/t/vq35-engine/133811/15 "2007-07-15T19:26:36Z")
[car-part.com](http://car-part.com) is just a site to point you in the right direction to an autowrecker. Yes I have used them to find parts but I can’t vouch for every wrecker in north america. Find the part call them up and negotiate. ---
**Author:** ![nopi240](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nopi240/32/5616_2.png) [@nopi240](https://forums.speedlife.net/u/nopi240)\ **Post date:** [November 23, 2007, 7:12am UTC](https://forums.speedlife.net/t/vq35-engine/133811/16 "2007-11-23T07:12:20Z")
how’s the aftermarket support going for the HR? are the internals eny different at all? from the previus 2 ones? ---
**Author:** ![RealityZ33](https://avatars.discourse-cdn.com/v4/letter/r/4af34b/32.png) [@RealityZ33](https://forums.speedlife.net/u/RealityZ33)\ **Post date:** [November 23, 2007, 10:26am UTC](https://forums.speedlife.net/t/vq35-engine/133811/17 "2007-11-23T10:26:17Z")
> [@On another topic](https://forums.speedlife.net/t/264/24): > > how’s the aftermarket support going for the HR? are the internals eny different at all? from the previus 2 ones? Totally different ---
**Author:** ![kazzxtrismus](https://avatars.discourse-cdn.com/v4/letter/k/3bc359/32.png) [@kazzxtrismus](https://forums.speedlife.net/u/kazzxtrismus)\ **Post date:** [November 23, 2007, 1:31pm UTC](https://forums.speedlife.net/t/vq35-engine/133811/18 "2007-11-23T13:31:57Z")
i dunno about the differences in the engines from DE to HR but… I have heard quite a few times the FWD and the RWD is the same castings etc the Altima SER had almost exactly trhe same EVERYTHING as the 350Z and this is why they cancelled it. not only did it bite (only a touch) into the 350z sales it took a massive chomp out of the Maxima sales!! this P.O’d some Nissan execs as dealers lost maxima sales to hungry sales guys at other dealers who would offer the Altima SER as a much cheaper alternative to the MAX… execs hate this kinda in-fighting. but ya the only diff was computer stuff…I’m pretty sure you can get a maxima or altima SER motor and drop it into a 350z or like your post speaks of…do a frankenstein swap but you’ll probly need the 350z computer… _**RUMOUR: also these cars have some weird shit goin on with their computer systems…as in the alti’s have a computer, tranny computer, server computer (type thing), and apparently need to be matched to eachother… I dunno if thats just a rumour or not tho**_\*\*\* so good luck and ha ha fck yall I got a 4 banger! woot to the super good gas mileage ok… im lying…I admit it i wish i could swap in a 350z drivetrain…