# VQ35DE 06-08 w/accessories, tin, sensors, ecu, COMPLETE SWAP

**URL:** https://forums.speedlife.net/t/vq35de-06-08-w-accessories-tin-sensors-ecu-complete-swap/76924
**Category:** Classifieds
**Created:** [December 5, 2009, 3:40pm UTC](https://forums.speedlife.net/t/vq35de-06-08-w-accessories-tin-sensors-ecu-complete-swap/76924 "2009-12-05T15:40:32Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![MPD47](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mpd47/32/7383_2.png) [@MPD47](https://forums.speedlife.net/u/MPD47)
#### Post date: [December 5, 2009, 3:40pm UTC](https://forums.speedlife.net/t/vq35de-06-08-w-accessories-tin-sensors-ecu-complete-swap/76924/1 "2009-12-05T15:40:32Z")

</div>

Selling my VQ35DE MY06+ motor as I’m in the midst of swapping in a VK56 into my 350z. Motor was installed into my Z in April of this year with just under 8k miles on it, it was a dealer pull out due to the car it came from suffering a heavy rear end accident. I put approximately 11 track hours on the motor this season. It burns ZERO oil. Here are the leakdown and compression numbers for the motor when COLD.

175 - 8%  
174 - 9%  
188 - 4%  
186 - 11%  
186 - 3%  
182 - 2%

All leakdown pressure was through the crankcase, absolutely zero through the coolant passages, intake, or exhaust valves.

_Included:_  
'06+ Wiring Harness for intake and exhaust variable cams  
'06+ ECU  
Intake Manifold with injectors  
All sensors  
All accessories (minus Air Con, I obviously didn’t have that)  
Stillen Shorty Headers  
Motordyne Plenumn Spacer  
Stock Starter

There are some more things included that you can see in the photos. It’s a complete swap as I pulled it from my car, the basic list is to just give you an idea of what is included. The motor had it’s oil changed with Redline Racing 10w-40 every 3 track days (so approx. every 3-4 hours). The motor is strapped down to a wooden jig we’ve been using to transport VQ35’s. It can be shipped freight at the buyer’s expense, insured of course, or I would be happy to meet a buyer in Buffalo or in the Leesburg VA or Newtown PA areas for a few extra dollars. I’ve tried to disclose as much as I know about this motor, if you have any questions feel free to PM me.

![http://www.mturck.com/ForSale/DSCF6882.jpg](http://www.mturck.com/ForSale/DSCF6882.jpg)  
 ![http://www.mturck.com/ForSale/DSCF6885.jpg](http://www.mturck.com/ForSale/DSCF6885.jpg)

Asking **$2100 USD** _OR BEST OFFER_  
I am negotiable so shoot me an offer, worst case I say no 🙂

---

<div class="post-metadata">

### Author: ![MPD47](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mpd47/32/7383_2.png) [@MPD47](https://forums.speedlife.net/u/MPD47)
#### Post date: [December 8, 2009, 3:42pm UTC](https://forums.speedlife.net/t/vq35de-06-08-w-accessories-tin-sensors-ecu-complete-swap/76924/2 "2009-12-08T15:42:38Z")

</div>

Sold!
