# w.t.b. honda parts **URL:** \ **Category:** Classifieds\ **Created:** [March 3, 2006, 8:48am UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840 "2006-03-03T08:48:58Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 3, 2006, 8:48am UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/1 "2006-03-03T08:48:58Z")
i would like to buy the following items… if you have any of these pm or respond back to me with item and price. vtec ecu obd1 for uberdata set up uberdata soccets and connection plug obd2b to obd1 conversion harness d16y8 valve cover any condition knock sensor for d16y8 front and or rear lips for civic front grill from 99-00 civic rear sway bar rear upper strut tower bar rear tie bar knock sensor post anything you might have that will fit one of these. ---
**Author:** ![MidgeX](https://avatars.discourse-cdn.com/v4/letter/m/a698b9/32.png) [@MidgeX](https://forums.speedlife.net/u/MidgeX)\ **Post date:** [March 3, 2006, 9:00am UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/2 "2006-03-03T09:00:16Z")
if u are getting an uberdate chip why not just have the non vtec ecu convered to vtec, i mean if u are gonna have it chipped anyway, just get the vtec progam on there ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 3, 2006, 10:21am UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/3 "2006-03-03T10:21:46Z")
long story short i could but am not that ambitious. i would be doing it myself and dont want to screw with it if i dont have to. but i would go that way if need be. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 3, 2006, 10:45am UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/4 "2006-03-03T10:45:29Z")
long story short i could but am not that ambitious. i would be doing it myself and dont want to screw with it if i dont have to. but i would go that way if need be. ---
**Author:** ![99\_civic\_si](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/99_civic_si/32/7319_2.png) [@99\_civic\_si](https://forums.speedlife.net/u/99_civic_si)\ **Post date:** [March 3, 2006, 5:02pm UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/5 "2006-03-03T17:02:11Z")
> [@whitecivic](#): > > vtec ecu obd1 for uberdata set up > uberdata soccets and connection plug > obd2b to obd1 conversion harness > > rear upper strut tower bar - DC anodized red > rear tie bar - same thing DC anodized red > > post anything you might have that will fit one of these. I have all these that I quoted, but I’m not sure if I want to get rid of the ECU and conversion harness. I may toy around with it and have a dedicated tuning ECU. Throw me an offer for the other shit. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 3, 2006, 5:55pm UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/6 "2006-03-03T17:55:38Z")
i would love the dc bars if they were any color other than red. but how much were you looking to get for the ecu and equipment. and just curious how much you would want for the dc stuff because i know someone else who is looking too. ---
**Author:** ![longuyen88](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/longuyen88/32/7611_2.png) [@longuyen88](https://forums.speedlife.net/u/longuyen88)\ **Post date:** [March 4, 2006, 5:06am UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/7 "2006-03-04T05:06:57Z")
I have the gsr rear sway bar. Take the whole setup for 35 firm. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 4, 2006, 6:09am UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/8 "2006-03-04T06:09:41Z")
do i need new end links or will they work on my 00 civic? ---
**Author:** ![longuyen88](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/longuyen88/32/7611_2.png) [@longuyen88](https://forums.speedlife.net/u/longuyen88)\ **Post date:** [March 4, 2006, 8:14am UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/9 "2006-03-04T08:14:37Z")
i think you’ll have to use si endlinks… go to autozone and they’ll have endlinks for much cheaper then the stealership. ---
**Author:** ![BDR\_LT1](https://avatars.discourse-cdn.com/v4/letter/b/a3d4f5/32.png) [@BDR\_LT1](https://forums.speedlife.net/u/BDR_LT1)\ **Post date:** [March 5, 2006, 9:19am UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/10 "2006-03-05T09:19:01Z")
i have the obd 2 to 1 harness a whole front bumper with the lip and the front upper strut bar, i also have a 99-00 2 dr trunk lid,power steering underdrive pulley, center ounsole molded for a radio all the vents center dash piece,headliner w/ sunroof. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 5, 2006, 11:17am UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/11 "2006-03-05T11:17:16Z")
i want the front bumper with the lib and maybe the strut bar. depending on what color the trunk lid is i may want that. may want the center console and radio console. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 5, 2006, 3:59pm UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/12 "2006-03-05T15:59:59Z")
bump. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 6, 2006, 3:29pm UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/13 "2006-03-06T15:29:24Z")
bump ---
**Author:** ![Coldaccord](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/coldaccord/32/7272_2.png) [@Coldaccord](https://forums.speedlife.net/u/Coldaccord)\ **Post date:** [March 6, 2006, 5:51pm UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/14 "2006-03-06T17:51:08Z")
I have quite a few things for ya. I have a front grill i have a d16y8 valve cover in perfect shape and I have a p72 ecu w/uberdata and a datalogging port ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 6, 2006, 8:09pm UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/15 "2006-03-06T20:09:23Z")
is the front grill an si or what is it? color oem? how much for all three together? pm sent [ QUOTE=Coldaccord]I have quite a few things for ya. I have a front grill i have a d16y8 valve cover in perfect shape and I have a p72 ecu w/uberdata and a datalogging port[/QUOTE] ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 7, 2006, 5:02pm UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/16 "2006-03-07T17:02:58Z")
bump ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 10, 2006, 6:07am UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/17 "2006-03-10T06:07:21Z")
bump still looking for parts. ---
**Author:** ![99\_civic\_si](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/99_civic_si/32/7319_2.png) [@99\_civic\_si](https://forums.speedlife.net/u/99_civic_si)\ **Post date:** [March 10, 2006, 9:48am UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/18 "2006-03-10T09:48:30Z")
bah, I still gotta toss you a quote on those few parts too. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 11, 2006, 10:17pm UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/19 "2006-03-11T22:17:58Z")
bump… anyone have parts. also need a knock sensor. ---
**Author:** ![Coldaccord](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/coldaccord/32/7272_2.png) [@Coldaccord](https://forums.speedlife.net/u/Coldaccord)\ **Post date:** [March 12, 2006, 4:17pm UTC](https://forums.speedlife.net/t/w-t-b-honda-parts/8840/20 "2006-03-12T16:17:47Z")
i still have the stuff i mentioned… [Next page](https://forums.speedlife.net/t/w-t-b-honda-parts/8840.md?page=2)