# Weld Drag light wheels, will fit camaro/firebird
**URL:** https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153
**Category:** Classifieds
**Created:** [January 13, 2010, 10:16am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153 "2010-01-13T10:16:59Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@jt76](https://forums.speedlife.net/u/jt76)
#### Post date: [January 13, 2010, 10:16am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/1 "2010-01-13T10:16:59Z")
I have a set of 15 X 3.5 / 15X 10 Weld Drag light wheels. They are in pretty decent shape. The fronts have tires in great condition, the rears have mickey thompson ET streets which are shot. One front rim is slightly ovaled after coming down too hard on a launch :headbang:(i think, or maybe a pot hole on NYI’s return road ☹ ) The others are fine, worst case just buy another front from jegs. These are great track wheels, i just want to go with something different. These wheels cost me around $700 when new, looking to clean them out of the garage and would like to see $300. Would also entertain trades for a set of weld pro stars or an Ls6 intake manifold (long shot, but i figured i would throw it out there).
Included are 4 wheels, 2 good front tires, 2 shitty rear tires
Pictured are these wheels on my Trans Am.
---
### Author:  [@dirtye30](https://forums.speedlife.net/u/dirtye30)
#### Post date: [January 13, 2010, 10:18am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/2 "2010-01-13T10:18:12Z")
ugh i would buy yhese today if the offset fit my thirdgen ☹
---
### Author:  [@jt76](https://forums.speedlife.net/u/jt76)
#### Post date: [January 13, 2010, 10:19am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/3 "2010-01-13T10:19:00Z")
They dont fit? i thought 4th/3rd gen were interchangeable?
---
### Author:  [@Karter](https://forums.speedlife.net/u/Karter)
#### Post date: [January 13, 2010, 10:20am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/4 "2010-01-13T10:20:40Z")
post the backspacing if you could, I need to messure and see if the rears will fit my set up.
also would you be willing to seperate, I already have a set of fronts.
---
### Author:  [@dirtye30](https://forums.speedlife.net/u/dirtye30)
#### Post date: [January 13, 2010, 10:21am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/5 "2010-01-13T10:21:02Z")
nah the rear end on a 4th gen is 2.5 inches wider and the backspacing is screwy ☹
---
### Author:  [@dirtye30](https://forums.speedlife.net/u/dirtye30)
#### Post date: [January 13, 2010, 10:21am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/6 "2010-01-13T10:21:32Z")
OMB ill take the fronts if carter takes it from behind 😜
---
### Author:  [@jt76](https://forums.speedlife.net/u/jt76)
#### Post date: [January 13, 2010, 10:23am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/7 "2010-01-13T10:23:24Z")
I honestly dont know what the offset of these wheels are. With these drag wheels, weld’s billets etc you have to order 4th gen f body specific wheels or else you run a spacer, which is what i did on my car. I would prefer not to separate them as i would have a hard time selling one good front wheel. But make me an offer anyways lol. These are NOT 4th gen specific.
---
### Author:  [@Karter](https://forums.speedlife.net/u/Karter)
#### Post date: [January 13, 2010, 10:25am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/8 "2010-01-13T10:25:21Z")
if you get a chance, messure from the back side of the center to the edge of the wheel, then I’ll go pull one of my wheels off and make sure they wont rub.
like that
---
### Author:  [@dirtye30](https://forums.speedlife.net/u/dirtye30)
#### Post date: [January 13, 2010, 10:27am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/9 "2010-01-13T10:27:15Z")
i said id take the fronts nukka!!! BTW they are 0 offset rears Karter
---
### Author:  [@jt76](https://forums.speedlife.net/u/jt76)
#### Post date: [January 13, 2010, 10:40am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/10 "2010-01-13T10:40:14Z")
I will measure them for ya when i get home.
---
### Author:  [@Karter](https://forums.speedlife.net/u/Karter)
#### Post date: [January 13, 2010, 10:48am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/11 "2010-01-13T10:48:13Z")
> [@jt76](#):
>
> I will measure them for ya when i get home.
thanks, i appreciate it
---
### Author:  [@jt76](https://forums.speedlife.net/u/jt76)
#### Post date: [January 13, 2010, 11:38am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/12 "2010-01-13T11:38:34Z")
measuring as you specify, 7.5 inches.
---
### Author:  [@Karter](https://forums.speedlife.net/u/Karter)
#### Post date: [January 13, 2010, 12:01pm UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/13 "2010-01-13T12:01:03Z")
> [@jt76](#):
>
> measuring as you specify, 7.5 inches.
TWSS
I’m out, they wont work for my set up until I back half.
I have maybe 7 between the spring and the center of the wheel.
---
### Author:  [@jt76](https://forums.speedlife.net/u/jt76)
#### Post date: [January 13, 2010, 1:22pm UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/14 "2010-01-13T13:22:29Z")
eh no problem, im sure someone will pick them up.
---
### Author:  [@BigEd88](https://forums.speedlife.net/u/BigEd88)
#### Post date: [January 13, 2010, 3:32pm UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/15 "2010-01-13T15:32:02Z")
we shall talk
---
### Author:  [@turbociv](https://forums.speedlife.net/u/turbociv)
#### Post date: [January 13, 2010, 4:08pm UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/16 "2010-01-13T16:08:48Z")
im interested, would you mind letting me test fit a rear to see if it will clear? Im pretty sure the front should work. lemme know
---
### Author:  [@jt76](https://forums.speedlife.net/u/jt76)
#### Post date: [January 13, 2010, 5:42pm UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/17 "2010-01-13T17:42:12Z")
Sure, i have no problem with that, as stated above 7.5 inch backspacing. To have these clear the calipers on my Trans am i used a spacer.
---
### Author:  [@Studderin](https://forums.speedlife.net/u/Studderin)
#### Post date: [January 13, 2010, 5:55pm UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/18 "2010-01-13T17:55:48Z")
rear BS is 7.5
front is 1.75
is what fits 4th gens, and the common specs.
And this style wheels is available in that fits for stock parts, could be 2.25 BS on the front but unlikely looking at the pics. There also dual bolt pattern that would fit other cars 5x4.75 and 5x5 or 5x4.5?
---
### Author:  [@dirtye30](https://forums.speedlife.net/u/dirtye30)
#### Post date: [January 13, 2010, 10:28pm UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/19 "2010-01-13T22:28:32Z")
Will you part with just the skinnies??
---
### Author:  [@turbociv](https://forums.speedlife.net/u/turbociv)
#### Post date: [January 14, 2010, 8:08am UTC](https://forums.speedlife.net/t/weld-drag-light-wheels-will-fit-camaro-firebird/78153/20 "2010-01-14T08:08:18Z")
> [@jt76](#):
>
> Sure, i have no problem with that, as stated above 7.5 inch backspacing. To have these clear the calipers on my Trans am i used a spacer.
what size slicks are on there now? my only concern is clearing the rear shocks, but if i can run a 20mm spacer to clear then id be game as well. PM me when you will be avail for a test fitment. Id luv to test fit one just to get an idea of what i can/cant fit in the rear of my car. Let me know if/when your avail.