# welder roll cage and motor mount
**URL:** https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061
**Category:** Classifieds
**Created:** [January 11, 2010, 7:06am UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061 "2010-01-11T07:06:15Z")
**Posts on this page:** 12
**Page:** 1
### Author:  [@laymone](https://forums.speedlife.net/u/laymone)
#### Post date: [January 11, 2010, 7:06am UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061/1 "2010-01-11T07:06:15Z")
looking for a local welder to weld in my motor mount for when i go k series. also looking to possibly get a welded roll cage (most likly 8pt)
716 507 7013
---
### Author:  [@Relicwelding](https://forums.speedlife.net/u/Relicwelding)
#### Post date: [January 11, 2010, 12:09pm UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061/2 "2010-01-11T12:09:09Z")
I can do it…Im certified in all the metals that my company uses and weld for the DOD in rochester,ny.
I have my own welders at my house let me know what you’d like to do
---
### Author:  [@laymone](https://forums.speedlife.net/u/laymone)
#### Post date: [January 12, 2010, 9:18am UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061/3 "2010-01-12T09:18:40Z")
The only problem with that is I’m in buffalo and the car is pretty much stripped in the garage
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [January 12, 2010, 12:51pm UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061/4 "2010-01-12T12:51:19Z")
Give me a call
---
### Author:  [@Hass](https://forums.speedlife.net/u/Hass)
#### Post date: [January 12, 2010, 1:35pm UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061/5 "2010-01-12T13:35:12Z")
Is it 4130 I assume?
i have an '09 miller trailblazer 302 on my rig, so i can go… wherever the fuck i feel like welding.
and if it’s over 1/8" thick make sure they’re pre and possibly post heating.
otherwise they’re a fucktard and you can enjoy your cracks.
roll cages are srs business.
make sure you don’t have a retard do it otherwise you’d better not wreck.
---
### Author:  [@laymone](https://forums.speedlife.net/u/laymone)
#### Post date: [February 27, 2010, 1:04pm UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061/6 "2010-02-27T13:04:06Z")
well i got my motor mounts in and need them welded like asap. im just getting a autopower bolt in roll bar since ill be autox 90% of the time.
bumpp
---
### Author:  [@Beejis60](https://forums.speedlife.net/u/Beejis60)
#### Post date: [February 27, 2010, 3:42pm UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061/7 "2010-02-27T15:42:08Z")
What mounts do you have? You don’t need to weld in Hasports.
---
### Author:  [@laymone](https://forums.speedlife.net/u/laymone)
#### Post date: [February 27, 2010, 3:58pm UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061/8 "2010-02-27T15:58:27Z")
innovative mounts. on the 88-91 civic/crx. it must be welded.
another big challenge is that the car is apart in my garage and i dont have a access to towing
---
### Author:  [@Beejis60](https://forums.speedlife.net/u/Beejis60)
#### Post date: [February 27, 2010, 4:38pm UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061/9 "2010-02-27T16:38:15Z")
> [@laymone](#):
>
> innovative mounts. on the 88-91 civic/crx. it must be welded.
Nice, and you’re correct, I forgot you need to weld in the rex mounts my bad.
---
### Author:  [@\_bojo](https://forums.speedlife.net/u/_bojo)
#### Post date: [December 1, 2010, 8:48pm UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061/10 "2010-12-01T20:48:20Z")
i can do it for u am in buffalo en got my own welder
---
### Author:  [@Draftinwitjr3815](https://forums.speedlife.net/u/Draftinwitjr3815)
#### Post date: [December 2, 2010, 3:30am UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061/11 "2010-12-02T03:30:11Z")
Wow I think after 9 months he got it done already…
---
### Author:  [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)
#### Post date: [December 2, 2010, 6:35am UTC](https://forums.speedlife.net/t/welder-roll-cage-and-motor-mount/78061/12 "2010-12-02T06:35:53Z")
LOL I think the car was already built and for sale