# Went out for some folding chairs **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [February 1, 2016, 1:15pm UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565 "2016-02-01T13:15:37Z")\ **Posts on this page:** 20\ **Page:** 6
**Author:** ![ryanbgb22](https://avatars.discourse-cdn.com/v4/letter/r/7feea3/32.png) [@ryanbgb22](https://forums.speedlife.net/u/ryanbgb22)\ **Post date:** [February 15, 2016, 2:05pm UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/101 "2016-02-15T14:05:52Z")
> [@Norb O](#): > > i stole it from someone else on corvette forum, I have no clue how they made it. I just stuck it in ![]() tags like you would for pictures and it works. It’s the same “splash screen” that comes up on the DIC when you turn the ignition on, kinda cool How much did the Huron exhaust setup set you back? I have their turbo kit on my fbody, they seem to do some pretty nice stuff for the price. I’ll be interested in hearing it. I’ve been pondering long tubes. But I’ve also been pondering selling one or both of my cars…I wish I could keep my mind on one desire for more than a few days haha ---
**Author:** ![02NismoSpecV](https://avatars.discourse-cdn.com/v4/letter/0/74df32/32.png) [@02NismoSpecV](https://forums.speedlife.net/u/02NismoSpecV)\ **Post date:** [February 16, 2016, 4:42am UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/102 "2016-02-16T04:42:05Z")
solid pick up man. good call on the exhaust option. i probably would’ve done the same thing in your situation lol :tup: to v8 noises ---
**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\ **Post date:** [February 16, 2016, 7:35am UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/103 "2016-02-16T07:35:15Z")
> [@ryanbgb22](#): > > How much did the Huron exhaust setup set you back? I have their turbo kit on my fbody, they seem to do some pretty nice stuff for the price. > > I’ll be interested in hearing it. I’ve been pondering long tubes. But I’ve also been pondering selling one or both of my cars…I wish I could keep my mind on one desire for more than a few days haha [http://shop.huronspeedproducts.com/XSPower-C5-Longtube-Header-System-XSPC5LTH.htm](http://shop.huronspeedproducts.com/XSPower-C5-Longtube-Header-System-XSPC5LTH.htm) They are having a sale now, $50 and free shipping > [@02NismoSpecV](#): > > solid pick up man. good call on the exhaust option. i probably would’ve done the same thing in your situation lol :tup: to v8 noises Yeah, I am pumped to get it back together and start driving it. ---
**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\ **Post date:** [February 19, 2016, 5:46am UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/104 "2016-02-19T05:46:05Z")
Longtubes came in much earlier than expected! I ordered them Sunday night and they were waiting for me Thursday afternoon. Not bad for a company that is closed this week and didn’t expect to ship til next. Boxes were wrapped up nicely. Cat was looking over the boxes, unfortunately I got the catless model, sorry lil guy [![https://farm2.staticflickr.com/1479/24499373713_83a4bf9101_b.jpg](https://farm2.staticflickr.com/1479/24499373713_83a4bf9101_b.jpg)](https://flic.kr/p/DjVGg4)[\_DSC4721](https://flic.kr/p/DjVGg4) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr [![https://farm2.staticflickr.com/1581/25032928181_1cfd319455_b.jpg](https://farm2.staticflickr.com/1581/25032928181_1cfd319455_b.jpg)](https://flic.kr/p/E95iq2)[\_DSC4723](https://flic.kr/p/E95iq2) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr [![https://farm2.staticflickr.com/1644/25032916021_e43931f949_b.jpg](https://farm2.staticflickr.com/1644/25032916021_e43931f949_b.jpg)](https://flic.kr/p/E95eNn)[\_DSC4725](https://flic.kr/p/E95eNn) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr [![https://farm2.staticflickr.com/1481/24499334983_1fd65295bf_b.jpg](https://farm2.staticflickr.com/1481/24499334983_1fd65295bf_b.jpg)](https://flic.kr/p/DjVuKi)[\_DSC4726](https://flic.kr/p/DjVuKi) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr [![https://farm2.staticflickr.com/1561/25126164285_a203062615_b.jpg](https://farm2.staticflickr.com/1561/25126164285_a203062615_b.jpg)](https://flic.kr/p/Ehjag4)[\_DSC4727](https://flic.kr/p/Ehjag4) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr [![https://farm2.staticflickr.com/1569/24830510870_51354d3b4d_b.jpg](https://farm2.staticflickr.com/1569/24830510870_51354d3b4d_b.jpg)](https://flic.kr/p/DQbRNo)[\_DSC4728](https://flic.kr/p/DQbRNo) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr [![https://farm2.staticflickr.com/1451/24495459904_81792238bd_b.jpg](https://farm2.staticflickr.com/1451/24495459904_81792238bd_b.jpg)](https://flic.kr/p/DjzCPA)[\_DSC4729](https://flic.kr/p/DjzCPA) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr I didn’t look too closely at the fabrication quality yet but initial impressions are good. We will see how the fitment is, I have heard good things. Starting the install. The midpipes were already removed since I had been repairing the stock ones [![https://farm2.staticflickr.com/1597/25099789226_14cde66686_b.jpg](https://farm2.staticflickr.com/1597/25099789226_14cde66686_b.jpg)](https://flic.kr/p/EeYYSE)[\_DSC4730](https://flic.kr/p/EeYYSE) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr Fuel Rail Covers off. I need to scrub these things in some hot soapy water. [![https://farm2.staticflickr.com/1595/24758429359_cdfa9bb6fa_b.jpg](https://farm2.staticflickr.com/1595/24758429359_cdfa9bb6fa_b.jpg)](https://flic.kr/p/DHPqtH)[\_DSC4731](https://flic.kr/p/DHPqtH) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr Battery disconnected and removed. [![https://farm2.staticflickr.com/1579/24495422574_ae41d73578_b.jpg](https://farm2.staticflickr.com/1579/24495422574_ae41d73578_b.jpg)](https://flic.kr/p/DjzrHY)[\_DSC4734](https://flic.kr/p/DjzrHY) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr Belt de-tensioned. Also note that I wrapped the radiator cover in 3M CF vinyl. Started wrapping the headlight bezels as well. [![https://farm2.staticflickr.com/1639/24830450260_8fb7c89d20_b.jpg](https://farm2.staticflickr.com/1639/24830450260_8fb7c89d20_b.jpg)](https://flic.kr/p/DQbxMo)[\_DSC4735](https://flic.kr/p/DQbxMo) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr Alternator removed and placed aside (I didn’t remove the big battery positive terminal) [![https://farm2.staticflickr.com/1718/25126079345_2d83438917_b.jpg](https://farm2.staticflickr.com/1718/25126079345_2d83438917_b.jpg)](https://flic.kr/p/EhiJ1z)[\_DSC4737](https://flic.kr/p/EhiJ1z) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr There’s not a lot of room by the accessories so rather than remove the belt completely I just tucked it in the alt bracket so that it’ll be easy to slip on later. [![https://farm2.staticflickr.com/1702/25126066765_4f90b834d4_b.jpg](https://farm2.staticflickr.com/1702/25126066765_4f90b834d4_b.jpg)](https://flic.kr/p/EhiEgF)[\_DSC4738](https://flic.kr/p/EhiEgF) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr Driver’s coils and AIR stuff removed. I’ll probably end up pulling both valve covers and scrubbing them clean [![https://farm2.staticflickr.com/1585/24499211593_ce419046d1_b.jpg](https://farm2.staticflickr.com/1585/24499211593_ce419046d1_b.jpg)](https://flic.kr/p/DjUS4T)[\_DSC4740](https://flic.kr/p/DjUS4T) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr Also started fabbing the cutout pipes that will be welded to the x-pipe. Need to deburr and tack this flange (the cutout valve and turndown will bolt to the flange) [![https://farm2.staticflickr.com/1652/24758579919_d2b892735f_b.jpg](https://farm2.staticflickr.com/1652/24758579919_d2b892735f_b.jpg)](https://flic.kr/p/DHQcez)[\_DSC4714](https://flic.kr/p/DHQcez) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr saddle cut with a hole saw. I may need to cut it with a 3" hole saw to saddle to the new x-pipe properly [![https://farm2.staticflickr.com/1656/24758546089_b8b365f5bb_b.jpg](https://farm2.staticflickr.com/1656/24758546089_b8b365f5bb_b.jpg)](https://flic.kr/p/DHQ2bi)[\_DSC4720](https://flic.kr/p/DHQ2bi) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [February 19, 2016, 5:53am UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/105 "2016-02-19T05:53:46Z")
I have a giant hole saw kit at the shop if you need anything :tup: ---
**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\ **Post date:** [February 19, 2016, 5:55am UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/106 "2016-02-19T05:55:14Z")
I’ll take a 3" for sure ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [February 19, 2016, 5:57am UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/107 "2016-02-19T05:57:29Z")
> [@Norb O](#): > > I’ll take a 3" for sure Im sure you would ---
**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\ **Post date:** [February 19, 2016, 9:12am UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/108 "2016-02-19T09:12:38Z")
![http://gifsec.com/wp-content/uploads/GIF/2014/08/Dear-God-Its-beautiful.gif?gs=a](http://gifsec.com/wp-content/uploads/GIF/2014/08/Dear-God-Its-beautiful.gif?gs=a) ---
**Author:** ![Wahoo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wahoo/32/8265_2.png) [@Wahoo](https://forums.speedlife.net/u/Wahoo)\ **Post date:** [February 19, 2016, 11:48am UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/109 "2016-02-19T11:48:42Z")
Nice progress! From the factory is this car rated at 385hp or was it 345hp? ---
**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\ **Post date:** [February 19, 2016, 12:22pm UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/110 "2016-02-19T12:22:27Z")
i think 345 they bumped it to 350 in 2001-2004 for non-Z06 models by using the LS6 intake and changing a few other things 2001 Z06 (LS6 motor) was 385hp, 02-04 Z06 was king of the hill with 405hp using 243 heads, hotter cam, LS6 intake, less restrictive exhaust, and a few other things ---
**Author:** ![2TurboZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2turboz/32/7577_2.png) [@2TurboZ](https://forums.speedlife.net/u/2TurboZ)\ **Post date:** [February 19, 2016, 12:52pm UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/111 "2016-02-19T12:52:13Z")
MMMMMMM Chicken ---
**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\ **Post date:** [February 19, 2016, 1:15pm UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/112 "2016-02-19T13:15:35Z")
Fried Rice Combo I’ll post up a pic of the vanity plate later. time to go ride sleds now ---
**Author:** ![ultradriver10000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ultradriver10000/32/7397_2.png) [@ultradriver10000](https://forums.speedlife.net/u/ultradriver10000)\ **Post date:** [February 19, 2016, 4:17pm UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/113 "2016-02-19T16:17:18Z")
Cut off and weld up those EGR ports. ---
**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\ **Post date:** [February 23, 2016, 5:39pm UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/114 "2016-02-23T17:39:41Z")
been busy. installed the headers over the weekend got the old stuff out, came out pretty easy [![https://farm2.staticflickr.com/1566/24928376070_bb3172e418_b.jpg](https://farm2.staticflickr.com/1566/24928376070_bb3172e418_b.jpg)](https://flic.kr/p/DYQrHq)[\_DSC4741](https://flic.kr/p/DYQrHq) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr shop vac’d and cleaned the valve covers, 16 years of grime [![https://farm2.staticflickr.com/1569/24597153923_6547bff6b9_b.jpg](https://farm2.staticflickr.com/1569/24597153923_6547bff6b9_b.jpg)](https://flic.kr/p/DtyQUK)[\_DSC4742](https://flic.kr/p/DtyQUK) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr [![https://farm2.staticflickr.com/1603/25130748181_9c524af423_b.jpg](https://farm2.staticflickr.com/1603/25130748181_9c524af423_b.jpg)](https://flic.kr/p/EhHDTK)[\_DSC4743](https://flic.kr/p/EhHDTK) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr dropped by the dealer around the corner for some new MLS gaskets. I thought the ones that came with the headers would be the crappy imported perforated metal/paper type by they also seemed to be of the MLS construction. Never had a bad experience with the OEM GM gaskets though so they went in. [![https://farm2.staticflickr.com/1681/24597130203_d855b195b3_b.jpg](https://farm2.staticflickr.com/1681/24597130203_d855b195b3_b.jpg)](https://flic.kr/p/DtyHRM)[\_DSC4744](https://flic.kr/p/DtyHRM) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr at this point I dropped the hammer and got the longtubes in. they fought me at first but I finally wrestled them in. It’s a tight fit on both sides for sure. Had to grind a portion of bellhousing on the driver’s side and slid those in from the bottom. On the passenger side they went in from the top after removing the starter and dipstick. [![https://farm2.staticflickr.com/1624/25105666822_8d14f91264_b.jpg](https://farm2.staticflickr.com/1624/25105666822_8d14f91264_b.jpg)](https://flic.kr/p/Efv75w)[\_DSC4745](https://flic.kr/p/Efv75w) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr on the passenger side the valve cover had to come off to make some room. good time to inspect the valvetrain, very clean for 105K. [![https://farm2.staticflickr.com/1669/24856230029_1986222d72_b.jpg](https://farm2.staticflickr.com/1669/24856230029_1986222d72_b.jpg)](https://flic.kr/p/DSsFda)[\_DSC4746](https://flic.kr/p/DSsFda) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr while removing the rear sway bar end links to make room for installing the Z06 Ti’s the looked to be trashed, so I picked up metal construction, beefy Moog replacements with nice grease fittings for serviceability. [![https://farm2.staticflickr.com/1618/24856217289_0773ba6969_b.jpg](https://farm2.staticflickr.com/1618/24856217289_0773ba6969_b.jpg)](https://flic.kr/p/DSsBqv)[\_DSC4747](https://flic.kr/p/DSsBqv) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr with the headers loosely bolted in I installed the x pipe and intermediate pipes underneath and connected everything. Everything tucked up nicely, no problems. Finally I tightened down the headers, x pipe, intermediates, and axleback. Before wrapping up the install I cleaned everything with IPA so that any fingerprints/grease wouldn’t get burned onto the pipes and look bad. [![https://farm2.staticflickr.com/1671/25105630652_eb0c3f4c5a_b.jpg](https://farm2.staticflickr.com/1671/25105630652_eb0c3f4c5a_b.jpg)](https://flic.kr/p/EfuVjU)[\_DSC4748](https://flic.kr/p/EfuVjU) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr Coil packs, wires, AIR crap all back in. [![https://farm2.staticflickr.com/1496/25223891495_181cfe15fb_b.jpg](https://farm2.staticflickr.com/1496/25223891495_181cfe15fb_b.jpg)](https://flic.kr/p/EqX39X)[\_DSC4749](https://flic.kr/p/EqX39X) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr [![https://farm2.staticflickr.com/1513/24928267850_3267973e1f_b.jpg](https://farm2.staticflickr.com/1513/24928267850_3267973e1f_b.jpg)](https://flic.kr/p/DYPTxy)[\_DSC4750](https://flic.kr/p/DYPTxy) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr Wire clearance on one of the passenger side primaries was closer than I’d like, but I’ve put a couple hundred miles on so far with no issue. I’m really glad I kept the factory metal heat shields [![https://farm2.staticflickr.com/1609/24593205474_78388bf2c5_b.jpg](https://farm2.staticflickr.com/1609/24593205474_78388bf2c5_b.jpg)](https://flic.kr/p/DtdBb3)[\_DSC4751](https://flic.kr/p/DtdBb3) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr rather than upgrade to the newer 01-04 dipstick I made the older version work by bolting to the AIR fitting. the AIR won’t be around for long, will wait until I install the LS6 intake before tuning [![https://farm2.staticflickr.com/1703/24928164630_f3c9d32820_b.jpg](https://farm2.staticflickr.com/1703/24928164630_f3c9d32820_b.jpg)](https://flic.kr/p/DYPmRU)[\_DSC4752](https://flic.kr/p/DYPmRU) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr Fired her up, checked for leaks, the band clamps on the intermediate pipes suck, so I’ll replace those with proper quality ones pipes getting nice and golden with heat, paid off to wipe them down [![https://farm2.staticflickr.com/1559/25223857035_737c958d5d_b.jpg](https://farm2.staticflickr.com/1559/25223857035_737c958d5d_b.jpg)](https://flic.kr/p/EqWRUP)[\_DSC4755](https://flic.kr/p/EqWRUP) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr [![https://farm2.staticflickr.com/1687/24593184174_f37b6f3e8b_b.jpg](https://farm2.staticflickr.com/1687/24593184174_f37b6f3e8b_b.jpg)](https://flic.kr/p/DtduQN)[\_DSC4756](https://flic.kr/p/DtduQN) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr Looks stock otherwise, fuel rail covers are off to get scrubbed [![https://farm2.staticflickr.com/1597/24597016003_f91e990066_b.jpg](https://farm2.staticflickr.com/1597/24597016003_f91e990066_b.jpg)](https://flic.kr/p/Dty8UP)[\_DSC4757](https://flic.kr/p/Dty8UP) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr removed the headlight bezels and wrapped with Carbon Fiber Vinyl, ended that night with a treat [![https://farm2.staticflickr.com/1659/24593153494_618b7b720e_b.jpg](https://farm2.staticflickr.com/1659/24593153494_618b7b720e_b.jpg)](https://flic.kr/p/DtdkHQ)[\_DSC4759](https://flic.kr/p/DtdkHQ) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr [![https://farm2.staticflickr.com/1718/24856097509_09a73eaf77_b.jpg](https://farm2.staticflickr.com/1718/24856097509_09a73eaf77_b.jpg)](https://flic.kr/p/DSrZPk)[\_DSC4760](https://flic.kr/p/DSrZPk) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr Finished up by doing the Ranger method for clutch fluid. Put 100 miles on it Sunday in the countryside, clutch went to the floor after a couple gear changes at very high RPM. Hopefully this helps. Fluid definitely original [![https://farm2.staticflickr.com/1523/25105511322_71bb6d4b16_b.jpg](https://farm2.staticflickr.com/1523/25105511322_71bb6d4b16_b.jpg)](https://flic.kr/p/EfuiRu)[\_DSC4763](https://flic.kr/p/EfuiRu) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr totally opaque [![https://farm2.staticflickr.com/1551/25223733485_97314a9644_b.jpg](https://farm2.staticflickr.com/1551/25223733485_97314a9644_b.jpg)](https://flic.kr/p/EqWebD)[\_DSC4764](https://flic.kr/p/EqWebD) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr [![https://farm2.staticflickr.com/1560/25197431536_9d0b469830_b.jpg](https://farm2.staticflickr.com/1560/25197431536_9d0b469830_b.jpg)](https://flic.kr/p/EoBqwL)[\_DSC4767](https://flic.kr/p/EoBqwL) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr getting there [![https://farm2.staticflickr.com/1614/25197421636_6ce6cff1be_b.jpg](https://farm2.staticflickr.com/1614/25197421636_6ce6cff1be_b.jpg)](https://flic.kr/p/EoBnA5)[\_DSC4769](https://flic.kr/p/EoBnA5) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr Final product of what was removed [![https://farm2.staticflickr.com/1524/25130479701_b48ee6f2f7_b.jpg](https://farm2.staticflickr.com/1524/25130479701_b48ee6f2f7_b.jpg)](https://flic.kr/p/EhGh5M)[\_DSC4770](https://flic.kr/p/EhGh5M) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr More to come this week, I’m working on installing an AUX connection for my phone with Bluetooth capability ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [February 23, 2016, 5:43pm UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/115 "2016-02-23T17:43:05Z")
Damn that fluid was hammered ---
**Author:** ![Wahoo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wahoo/32/8265_2.png) [@Wahoo](https://forums.speedlife.net/u/Wahoo)\ **Post date:** [February 23, 2016, 6:46pm UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/116 "2016-02-23T18:46:20Z")
Nice progress! Hows the car feel? Yeah my gto i noticed when i go to first start it, i push in the clutch and it feels stiff,not sure if its a sign that the clutch/pressure plate is old or maybe the slave cylinder. I already syphoned the clutch fluid and put new stuff in once, it didnt get too dirty yet but we will see when spring hits as i do the needed maintenance. I was hoping to not have to do a clutch this year lol ---
**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\ **Post date:** [February 24, 2016, 4:57am UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/117 "2016-02-24T04:57:12Z")
> [@Wahoo](#): > > Nice progress! Hows the car feel? > > Yeah my gto i noticed when i go to first start it, i push in the clutch and it feels stiff,not sure if its a sign that the clutch/pressure plate is old or maybe the slave cylinder. > > I already syphoned the clutch fluid and put new stuff in once, it didnt get too dirty yet but we will see when spring hits as i do the needed maintenance. I was hoping to not have to do a clutch this year lol Just drive it and see what happens, I don’t think the F-body/GTO hydraulics are as bad as the Vette stuff since the slave is so close to the master. I will eventually put a Tick master in this because I ran a GM slave with a BMW master on the swap and the thing was bulletproof (dont think I even changed fluid ever) It feels awesome after the headers. Noticeably quicker but the best part is the change in sound. The old bullets droned everywhere especially around town and on the highway as well. Now you really can’t hear the exhaust while cruising (all road nice, need to get rid of these wooden runflats). Get on it though and it howls, definitely a much more “exotic” sound with the Ti’s. ---
**Author:** ![Harvey](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/harvey/32/5069_2.png) [@Harvey](https://forums.speedlife.net/u/Harvey)\ **Post date:** [February 24, 2016, 5:49am UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/118 "2016-02-24T05:49:10Z")
Nice pickup. I have a 98 Vette that was purchased from a friend with ~20k miles, and the clutch fluid looked about the same. He barely drove it, and I know for sure it was never at a drag strip, track or abused. Based on the line routing and some reading on Corvetteforum, my feeling is that it’s caused by the long lines running next to the drivetrain and heat everywhere along the way. I’ve been using the same method as you every time I change the oil or wash the car. After 5 or 6 reservoir swaps it started to clear up. After 12 it is still murky, but mostly clear. Hopefully RBF fluid will help in the long run. ---
**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\ **Post date:** [February 24, 2016, 6:15am UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/119 "2016-02-24T06:15:13Z")
^ What’s the result of the fluid change? Do you get clutch on the floor after multiple high rpm shifts? ---
**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\ **Post date:** [February 26, 2016, 6:28am UTC](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565/120 "2016-02-26T06:28:13Z")
Time for some tunes So i pulled the passenger foot kick panel and cut the CD changer connector, and after thinking about how I wanted to route the radio shack connector, I sat down at the kitchen table and soldered wires to the 5 pins using bits of my old GM truck harness from my swap. small scale soldering is not my strong point but I got it done. ![http://cdn.shopify.com/s/files/1/0953/5270/products/02740246_01_378dc416-5a76-4a08-a862-0d37da52574b_grande.jpeg?v=1446834591](http://cdn.shopify.com/s/files/1/0953/5270/products/02740246_01_378dc416-5a76-4a08-a862-0d37da52574b_grande.jpeg?v=1446834591) I made temporary connections to everything (left the bare shield wires disconnected from anything), stuck a CD in the changer, crossed my fingers, reconnected the battery, and let her rip [![https://farm2.staticflickr.com/1521/24639641953_d4c2c3648c_b.jpg](https://farm2.staticflickr.com/1521/24639641953_d4c2c3648c_b.jpg)](https://flic.kr/p/DxjB7Z)[\_DSC4771](https://flic.kr/p/DxjB7Z) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr SUCCESS! Using a 3.5mm to 3.5mm I was able to get my phone to play music and it sounded great. Figured I’d take it one step further, and plugged in my Miccus Mini Bluetooth adapter, which is a tiny portable unit that takes a bluetooth audio signal (like from your smartphone) and converts it to audio output through a 3.5mm jack. After making sure it was paired properly, that worked perfectly as well! So now I have wireless bluetooth AUX audio through my smartphone, which will be great this summer on those long road trips. Sure beats those expensive AUX converter units Now I need to clean up this mess, solder and heatshrink everything, and run the aux port into the center cubby where the bluetooth module will be housed. [![https://farm2.staticflickr.com/1630/24639633733_25fb9fb456_b.jpg](https://farm2.staticflickr.com/1630/24639633733_25fb9fb456_b.jpg)](https://flic.kr/p/DxjyFg)[\_DSC4773](https://flic.kr/p/DxjyFg) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr [Previous page](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565.md?page=5) [Next page](https://forums.speedlife.net/t/went-out-for-some-folding-chairs/273565.md?page=7)