# Werid problem...Hicas light, overheating, powerstearing lost, shutoff and wont start.

**URL:** <https://forums.speedlife.net/t/werid-problem-hicas-light-overheating-powerstearing-lost-shutoff-and-wont-start/113161>\
**Category:** SON240sx Automotive\
**Created:** [February 13, 2008, 8:16pm UTC](https://forums.speedlife.net/t/werid-problem-hicas-light-overheating-powerstearing-lost-shutoff-and-wont-start/113161 "2008-02-13T20:16:40Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![simplemind7](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@simplemind7](https://forums.speedlife.net/u/simplemind7)\
**Post date:** [February 15, 2008, 4:05pm UTC](https://forums.speedlife.net/t/werid-problem-hicas-light-overheating-powerstearing-lost-shutoff-and-wont-start/113161/14 "2008-02-15T16:05:06Z")

</div>

> [@another "bikers be careful" thread](https://forums.speedlife.net/t/another-bikers-be-careful-thread/15935/9):
>
> HIcas belt is 1 grove wider than non-hicas PS belt = unhappy belts
> 
> KAde from S14 into s13? did you use a S13 intake mani and temp sensors
> 
> are you heater core lines tightened?

it’s a '92 non hicas motor with a hicas pump on it, used the non hicas belt on the front 3 ribs and the belt got chewed, put it on the rear 3 ribs and it seems to be fine now.

i made sure everything was tight and the car didn’t leak anything prior to the belt letting go and doesn’t leak anything after the belt was replaced so the heater lines are good.

---

_[View the full topic](https://forums.speedlife.net/t/werid-problem-hicas-light-overheating-powerstearing-lost-shutoff-and-wont-start/113161)._