# what size.

**URL:** <https://forums.speedlife.net/t/what-size/146528>\
**Category:** Canada Nissan Automotive\
**Created:** [April 24, 2007, 12:31pm UTC](https://forums.speedlife.net/t/what-size/146528 "2007-04-24T12:31:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![amarsx](https://avatars.discourse-cdn.com/v4/letter/a/b487fb/32.png) [@amarsx](https://forums.speedlife.net/u/amarsx)\
**Post date:** [April 24, 2007, 12:31pm UTC](https://forums.speedlife.net/t/what-size/146528/1 "2007-04-24T12:31:12Z")

</div>

what size nut and thread pitch is the nut for bolting the sr turbo to manifold?

---

<div class="post-metadata">

**Author:** ![AnTi\_RiCeR](https://avatars.discourse-cdn.com/v4/letter/a/c68b51/32.png) [@AnTi\_RiCeR](https://forums.speedlife.net/u/AnTi_RiCeR)\
**Post date:** [April 24, 2007, 2:19pm UTC](https://forums.speedlife.net/t/what-size/146528/2 "2007-04-24T14:19:04Z")

</div>

About $60.00 from the dealership. Trust me…! You can use the bolts off a USDM 1992 300zx TT. They are identical to the red top sr20.

hope this helps, I know how hard it is to find small but crucial parts for a foreign engine!

---

<div class="post-metadata">

**Author:** ![Dynamo7](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@Dynamo7](https://forums.speedlife.net/u/Dynamo7)\
**Post date:** [April 24, 2007, 4:04pm UTC](https://forums.speedlife.net/t/what-size/146528/3 "2007-04-24T16:04:42Z")

</div>

M8 x 1.25 I believe, I know they are M8 foresure either x 1.25 or 1.5. Make sure you get lock washers too and torque them if you can, when i did the turbo on my car, there was only 2 nuts left.