# What to call this? **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [July 24, 2007, 3:58pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454 "2007-07-24T15:58:56Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [July 24, 2007, 3:58pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/1 "2007-07-24T15:58:56Z")
I don’t even know what to call this if it exists… But basically I want something that will bypass my turbo and connect the turbo manifold to the downpipe. I’m gonna be needing one here as my turbo either needs to be rebuilt or replaced… Not too sure yet. ---
**Author:** ![MrRage](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mrrage/32/5804_2.png) [@MrRage](https://forums.speedlife.net/u/MrRage)\ **Post date:** [July 24, 2007, 4:27pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/2 "2007-07-24T16:27:04Z")
Good luck… If your turbo needs to be rebuilt your going to have to send her off without your car running. You would have to go back to N/A to drive your car. You can’t bypass the turbo. ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [July 24, 2007, 4:45pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/3 "2007-07-24T16:45:19Z")
Yar that’s what I was afraid of… Fuck. Anyone know what Garrett turbo is comparable to [http://www.innovativeturbo.com/pages/cart\_itemDetails.asp?sku=SH57](http://www.innovativeturbo.com/pages/cart_itemDetails.asp?sku=SH57) The GT25 probably eh… I’m probably gonna replace the ITS one with a Garrett since it’s such a whore trying to find anyone who can rebuild this turbo. (by a whore I mean absofuckinglutely no one) Here’s my current turbo, and what’s wrong with it… [Click here to watch Turbo-81-96](http://media.putfile.com/Turbo-81-96) While driving to work yesterday, I had NO boost at all, when I go there I opened it up and found the bent fins. I tried starting it lunch time just to see, and it was spinning again. I think when it heats up the mixture of expanding and the shaft play caused it to grind on the housing… ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [July 24, 2007, 6:13pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/4 "2007-07-24T18:13:11Z")
The bearings crapped out, call a place called Presicion Turbo. Tell them what you want they can reccomend you a turbo. ---
**Author:** ![tokes](https://avatars.discourse-cdn.com/v4/letter/t/a88e57/32.png) [@tokes](https://forums.speedlife.net/u/tokes)\ **Post date:** [July 24, 2007, 6:13pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/5 "2007-07-24T18:13:41Z")
Equivalent in power to that turbo would roughly be a GT3071R. A 57-trim will make about 500 WHP pushing it to the max. Depending on the exhaust housing on your turbo you might be able to bolt up a T3 out of a junkyard, if it has the 5-bolt exhaust housing. Take some pics of the housing and post them. ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [July 24, 2007, 6:18pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/6 "2007-07-24T18:18:17Z")
You better get a inline oil filter for your oil feed line too…Would have most likely avoided this problem. If you want a good ballbearing turbo, get a GT3076R. ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [July 24, 2007, 6:25pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/7 "2007-07-24T18:25:12Z")
I just want it running… So something that can handle 300whp. Other than that I don’t give a fuck. I just need to get to and from work. Looking at the turbo comparison thing on Garrett’s site looks like the GT2560R will be good for the 300whp mark (says it’s good to 330whp) [![http://img2.putfile.com/thumb/7/20421231452.jpg](http://img2.putfile.com/thumb/7/20421231452.jpg)](http://www.putfile.com/pic.php?img=6093915) ---
**Author:** ![GRIPPY](https://avatars.discourse-cdn.com/v4/letter/g/ad7895/32.png) [@GRIPPY](https://forums.speedlife.net/u/GRIPPY)\ **Post date:** [July 25, 2007, 8:54am UTC](https://forums.speedlife.net/t/what-to-call-this/147454/8 "2007-07-25T08:54:27Z")
The 2560 is actually a GT28R, which is the BB turbo off of the s14 or s15 sr20det. Or for a non BB alternative you could use the pulsar gti-r t28. The are all in the t2 flange of course. ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [July 25, 2007, 5:08pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/9 "2007-07-25T17:08:45Z")
I found out what the problem is with my turbo. The compressor wheel got chewed up quite abit when my car ate a spark plug (that’s what also took out my exhaust valve.) The bearing and everything are fine and dandy. I have pictures I’ll post em later. Gotta go buy some plugs and stuff for my oil and coolant lines so I can drive my car. ---
**Author:** ![Ca\_Silvia](https://avatars.discourse-cdn.com/v4/letter/c/5f8ce5/32.png) [@Ca\_Silvia](https://forums.speedlife.net/u/Ca_Silvia)\ **Post date:** [July 26, 2007, 8:37am UTC](https://forums.speedlife.net/t/what-to-call-this/147454/10 "2007-07-26T08:37:11Z")
And this all happened when driving? How the hell did that motor keep running at all. :rolleyes: ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [July 26, 2007, 3:03pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/11 "2007-07-26T15:03:11Z")
Naw. The turbo didn’t run shitty until this Monday. My car was down for 2 weeks while we fixed the exhaust valve. Then went to drive this Monday and my turbo seized. Took it all apart and found the compressor wheel was chewed. ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [July 26, 2007, 3:19pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/12 "2007-07-26T15:19:15Z")
Hey what kind of cars come with the 5 bolt T3 turbos? ---
**Author:** ![Garret\_Volden](https://avatars.discourse-cdn.com/v4/letter/g/f475e1/32.png) [@Garret\_Volden](https://forums.speedlife.net/u/Garret_Volden)\ **Post date:** [July 27, 2007, 2:20am UTC](https://forums.speedlife.net/t/what-to-call-this/147454/13 "2007-07-27T02:20:47Z")
i might have a t3 off of a rb25,i will pm u in the next couple days if it works 200$ ---
**Author:** ![GRIPPY](https://avatars.discourse-cdn.com/v4/letter/g/ad7895/32.png) [@GRIPPY](https://forums.speedlife.net/u/GRIPPY)\ **Post date:** [July 27, 2007, 10:55am UTC](https://forums.speedlife.net/t/what-to-call-this/147454/14 "2007-07-27T10:55:18Z")
I also have a friend who is possibly selling his HKS GT2540 balbearing turbo which is a t3 good for up to about 400 whp. PM me if you are interested. ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [July 27, 2007, 3:16pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/15 "2007-07-27T15:16:28Z")
I’m new to the turbo scene and not too sure what the difference are between the turbos… But I do know my current turbo when it was working is a T3/T4 hybrid. Will that affect my tune and everything just having the straight T3? I’m sending my turbo away once I can find either someone to fab me a pipe to go from manifold to downpipe or just another T3 exhaust housing so I can run it the same way I am right now. [![http://img2.putfile.com/thumb/7/20621112449.jpg](http://img2.putfile.com/thumb/7/20621112449.jpg)](http://www.putfile.com/pic.php?img=6115333) ---
**Author:** ![MrRage](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mrrage/32/5804_2.png) [@MrRage](https://forums.speedlife.net/u/MrRage)\ **Post date:** [July 27, 2007, 3:21pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/16 "2007-07-27T15:21:31Z")
looks like this… ![http://img.photobucket.com/albums/v356/ragerman/Fuego/P1000275.jpg](http://img.photobucket.com/albums/v356/ragerman/Fuego/P1000275.jpg) ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [July 27, 2007, 3:23pm UTC](https://forums.speedlife.net/t/what-to-call-this/147454/17 "2007-07-27T15:23:16Z")
That’s the T3? Oi, that won’t work. Or is that a T3/T4? Cuz I see it says T3/T4 on the sign behind it.