# Whats in your garage? (long post)

**URL:** https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364
**Category:** NYSpeed Automotive
**Created:** [June 23, 2007, 9:17am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364 "2007-06-23T09:17:35Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)
#### Post date: [June 23, 2007, 9:17am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/1 "2007-06-23T09:17:35Z")

</div>

I need to replace just about every (non-metal; moving parts; small sized) tool that was in my garage. Power tools, feeler guages, ratchets, etc.

Considering that I’d built up the previous collection over quite a few years, I’m quite sure that there are items that I cannot think of off the top of my head.

Basic auto work, maintenance. Home maintenance & repair. 12v electronics diagnostics & repair. Composites fab. You get the idea…

**Heres what i’ve got, please post some more suggestions:**  
Tool chest  
bench grinder  
angle grinder  
Compound miter saw  
Circ saw  
Scroll saw  
Sawzall  
Shop vac  
Belt/disc sander  
Dremel / rotary tool  
Router  
Walkie Talkie set  
Heat gun  
12v power supply (\<20 amp)  
Fluke multimeter  
Fluke clamp meter  
Noid lights  
Butane torch  
Grease fitting gun  
Air compressor  
Air powered tools (gun, ratchet, grinder, sander, chisel/hammer)  
Cutting stone set  
Air hosery  
Air powered tire tools (fill kit & guage)  
Air finish nailer  
Ratcheting wrench set  
Tq wrenches (.375" & .5")  
Torx bit sets  
Drill bit set  
Spark plug gapper  
Brush set  
Bottle brush hone  
Ring compressor  
Spring compressor  
Feeler guage set  
Caliper (micrometer)  
Carb. tool kit  
Engine picker  
tranny jack  
Fluid catch pans & funnels  
Timing light  
Compression tester  
Leakdown tester  
Pully removal set  
Tap & die set  
C-clamps  
Brake bleeder kit  
Corner braces (wood)  
T-bar braces (wood)  
Sanding block  
T square  
Quick sqaure  
Level & mag. level  
Hole saw kit  
Safety goggles

Thanks for any input… I hate being in the middle of something and not having the apporpriate tool, hence trying to replace all the important stuff now.

_Side note_: any bright ideas on how to clean standard steel tools? Wrenches, sockets, extensions, etc. …I was thinking parts cleaner & then a rock tumbler / polisher?

---

<div class="post-metadata">

### Author: ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)
#### Post date: [June 23, 2007, 9:29am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/2 "2007-06-23T09:29:35Z")

</div>

punches/chisels/

gasket scrapers, battery charger, jack stands, creeper,

hoist/ AWD dyno/ rotisserie/ large metal workbench/ stripper pole/ hot(female)strippers

---

<div class="post-metadata">

### Author: ![RobHimself](https://avatars.discourse-cdn.com/v4/letter/r/e480ec/32.png) [@RobHimself](https://forums.speedlife.net/u/RobHimself)
#### Post date: [June 23, 2007, 9:34am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/3 "2007-06-23T09:34:55Z")

</div>

fridge filled with beer and steaks

---

<div class="post-metadata">

### Author: ![Bacon](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bacon/32/7230_2.png) [@Bacon](https://forums.speedlife.net/u/Bacon)
#### Post date: [June 23, 2007, 9:42am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/4 "2007-06-23T09:42:21Z")

</div>

Biggest grill you can possibly buy.

---

<div class="post-metadata">

### Author: ![RobHimself](https://avatars.discourse-cdn.com/v4/letter/r/e480ec/32.png) [@RobHimself](https://forums.speedlife.net/u/RobHimself)
#### Post date: [June 23, 2007, 9:43am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/5 "2007-06-23T09:43:28Z")

</div>

^^ and it will still not be big enough

---

<div class="post-metadata">

### Author: ![Bacon](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bacon/32/7230_2.png) [@Bacon](https://forums.speedlife.net/u/Bacon)
#### Post date: [June 23, 2007, 9:51am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/6 "2007-06-23T09:51:48Z")

</div>

Infact you should just have one custom fabricated to the shape of the garage.

---

<div class="post-metadata">

### Author: ![speedped79](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/speedped79/32/7491_2.png) [@speedped79](https://forums.speedlife.net/u/speedped79)
#### Post date: [June 23, 2007, 9:52am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/7 "2007-06-23T09:52:14Z")

</div>

engine stand?

---

<div class="post-metadata">

### Author: ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)
#### Post date: [June 23, 2007, 10:03am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/8 "2007-06-23T10:03:57Z")

</div>

[quote=“FuzzyFish,post:4,topic:31364"”]

Biggest grill you can possibly buy.

[/quote]

already having a NG line run out into the yard as part of the rebuild. 😉

---

<div class="post-metadata">

### Author: ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)
#### Post date: [June 23, 2007, 10:04am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/9 "2007-06-23T10:04:20Z")

</div>

[quote=“RobHimself,post:3,topic:31364"”]

fridge filled with beer and steaks

[/quote]

you going to bring the tubesteak?

---

<div class="post-metadata">

### Author: ![RobHimself](https://avatars.discourse-cdn.com/v4/letter/r/e480ec/32.png) [@RobHimself](https://forums.speedlife.net/u/RobHimself)
#### Post date: [June 23, 2007, 10:06am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/10 "2007-06-23T10:06:31Z")

</div>

as long as you provide the lube… God thats gay

---

<div class="post-metadata">

### Author: ![66impalass](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/66impalass/32/7429_2.png) [@66impalass](https://forums.speedlife.net/u/66impalass)
#### Post date: [June 23, 2007, 10:16am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/11 "2007-06-23T10:16:29Z")

</div>

about 92 cars…

---

<div class="post-metadata">

### Author: ![Mrs\_Karus](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mrs_karus/32/7426_2.png) [@Mrs\_Karus](https://forums.speedlife.net/u/Mrs_Karus)
#### Post date: [June 23, 2007, 10:24am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/12 "2007-06-23T10:24:37Z")

</div>

no garage here :\*(

at my parents… car wash stuff, bikes, not much else. we dont use it for a car.

---

<div class="post-metadata">

### Author: ![Bacon](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bacon/32/7230_2.png) [@Bacon](https://forums.speedlife.net/u/Bacon)
#### Post date: [June 23, 2007, 10:25am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/13 "2007-06-23T10:25:57Z")

</div>

[quote=“Nikuk,post:8,topic:31364"”]

already having a NG line run out into the yard as part of the rebuild. 😉

[/quote]

In that case a two-post lift.

---

<div class="post-metadata">

### Author: ![dreid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dreid/32/7388_2.png) [@dreid](https://forums.speedlife.net/u/dreid)
#### Post date: [June 23, 2007, 10:55am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/14 "2007-06-23T10:55:31Z")

</div>

[quote=“Nikuk,post:8,topic:31364"”]

already having a NG line run out into the yard as part of the rebuild. 😉

[/quote]

whats that costing you. I was considering this but I never looked into pricing

---

<div class="post-metadata">

### Author: ![Boomin99GT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boomin99gt/32/7306_2.png) [@Boomin99GT](https://forums.speedlife.net/u/Boomin99GT)
#### Post date: [June 23, 2007, 11:12am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/15 "2007-06-23T11:12:00Z")

</div>

A big stainless steel toilet so you can take a dump while being surround by tools and other manly things

---

<div class="post-metadata">

### Author: ![Carnut](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carnut/32/7590_2.png) [@Carnut](https://forums.speedlife.net/u/Carnut)
#### Post date: [June 23, 2007, 11:33am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/16 "2007-06-23T11:33:20Z")

</div>

[quote=“Nikuk”"]

I need to replace just about every (non-metal; moving parts; small sized) tool that was in my garage. Power tools, feeler guages, ratchets, etc.

Considering that I’d built up the previous collection over quite a few years, I’m quite sure that there are items that I cannot think of off the top of my head.

Basic auto work, maintenance. Home maintenance & repair. 12v electronics diagnostics & repair. Composites fab. You get the idea…

**Heres what i’ve got, please post some more suggestions:**  
Tool chest  
bench grinder  
angle grinder  
Compound miter saw  
Circ saw  
Scroll saw  
Sawzall  
Shop vac  
Belt/disc sander  
Dremel / rotary tool  
Router  
Walkie Talkie set  
Heat gun  
12v power supply (\<20 amp)  
Fluke multimeter  
Fluke clamp meter  
Noid lights  
Butane torch  
Grease fitting gun  
Air compressor  
Air powered tools (gun, ratchet, grinder, sander, chisel/hammer)  
Cutting stone set  
Air hosery  
Air powered tire tools (fill kit & guage)  
Air finish nailer  
Ratcheting wrench set  
Tq wrenches (.375" & .5")  
Torx bit sets  
Drill bit set  
Spark plug gapper  
Brush set  
Bottle brush hone  
Ring compressor  
Spring compressor  
Feeler guage set  
Caliper (micrometer)  
Carb. tool kit  
Engine picker  
tranny jack  
Fluid catch pans & funnels  
Timing light  
Compression tester  
Leakdown tester  
Pully removal set  
Tap & die set  
C-clamps  
Brake bleeder kit  
Corner braces (wood)  
T-bar braces (wood)  
Sanding block  
T square  
Quick sqaure  
Level & mag. level  
Hole saw kit  
Safety goggles

Thanks for any input… I hate being in the middle of something and not having the apporpriate tool, hence trying to replace all the important stuff now.

_Side note_: any bright ideas on how to clean standard steel tools? Wrenches, sockets, extensions, etc. …I was thinking parts cleaner & then a rock tumbler / polisher?

[/quote]

FIRE EXTINGUISHER!!!:picard:

A security system and make sure your home owners insurance has a list of this as you just gave out a menu

---

<div class="post-metadata">

### Author: ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)
#### Post date: [June 23, 2007, 11:39am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/17 "2007-06-23T11:39:20Z")

</div>

[quote=“Carnut,post:16,topic:31364"”]

[SIZE=2]FIRE EXTINGUISHER!!!:picard: [/SIZE]

A security system and make sure your home owners insurance has a list of this as you just gave out a menu

[/quote]

:eekdance:

there was one in there. A,B,C… large one. NO ONE WAS HOME TO USE IT. 🙂

We have a sec. system, and live in a very well policed area. Ah, and the ins company covered all of this the first time around… don’t imagine it’d change.

edit- not to mention the guard dog

![http://img.photobucket.com/albums/v492/NjccBflo/April/DSCN5035.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/6/f/6f03d48e0ecda36f9acd8384aa0703a68043f538.jpeg)

---

<div class="post-metadata">

### Author: ![choko](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choko/32/7240_2.png) [@choko](https://forums.speedlife.net/u/choko)
#### Post date: [June 23, 2007, 11:55am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/18 "2007-06-23T11:55:31Z")

</div>

i have more nitrous systems/things that use nitrous then the NOS warehouse has :lol:

\<\<Nitrous WHORE!!!

---

<div class="post-metadata">

### Author: ![ryanmcell](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ryanmcell/32/7510_2.png) [@ryanmcell](https://forums.speedlife.net/u/ryanmcell)
#### Post date: [June 23, 2007, 11:59am UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/19 "2007-06-23T11:59:07Z")

</div>

[quote=“Boomin99GT,post:15,topic:31364"”]

A big stainless steel toilet so you can take a dump while being surround by tools and other manly things

[/quote]

That was my option, except he needs the bathroom to be the Tim Taylor Man’s Bathroom.

---

<div class="post-metadata">

### Author: ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)
#### Post date: [June 23, 2007, 12:05pm UTC](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364/20 "2007-06-23T12:05:06Z")

</div>

[quote=“choko,post:18,topic:31364"”]

i have more nitrous systems/things that use nitrous then the NOS warehouse has :lol:

\<\<Nitrous WHORE!!!

[/quote]

matter of fact, i need to talk to you sometime about that. 🙂

[Next page](https://forums.speedlife.net/t/whats-in-your-garage-long-post/31364.md?page=2)
