# wheel fitment  s13

**URL:** <https://forums.speedlife.net/t/wheel-fitment-s13/221199>\
**Category:** SON240sx Automotive\
**Created:** [March 13, 2012, 8:25pm UTC](https://forums.speedlife.net/t/wheel-fitment-s13/221199 "2012-03-13T20:25:59Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![moulds](https://avatars.discourse-cdn.com/v4/letter/m/b2d939/32.png) [@moulds](https://forums.speedlife.net/u/moulds)\
**Post date:** [March 13, 2012, 8:25pm UTC](https://forums.speedlife.net/t/wheel-fitment-s13/221199/1 "2012-03-13T20:25:59Z")

</div>

jus bought a set of 15x8 +25 enkei 92 classics an im not sure how to get the flush look.my car is slammed to the ground,with mild camber in the rear and i have moderately rolled fenders(front/rear).can anyone shoot me some tire sizes if anyone is running a similar setup…will post pics if needed

---

<div class="post-metadata">

**Author:** ![KA24Power](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ka24power/32/5595_2.png) [@KA24Power](https://forums.speedlife.net/u/KA24Power)\
**Post date:** [March 13, 2012, 8:28pm UTC](https://forums.speedlife.net/t/wheel-fitment-s13/221199/2 "2012-03-13T20:28:01Z")

</div>

get 25mm spacers. 205/50/15 tires.

---

<div class="post-metadata">

**Author:** ![derass](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/derass/32/5691_2.png) [@derass](https://forums.speedlife.net/u/derass)\
**Post date:** [March 13, 2012, 8:30pm UTC](https://forums.speedlife.net/t/wheel-fitment-s13/221199/3 "2012-03-13T20:30:13Z")

</div>

It’s the offset that is holding you back. 15x8 +0 would fit flush/poke. If I were you I would just run a 225 or 235 that will fit square on the wheel.

---

<div class="post-metadata">

**Author:** ![sidewayz240](https://avatars.discourse-cdn.com/v4/letter/s/e99b99/32.png) [@sidewayz240](https://forums.speedlife.net/u/sidewayz240)\
**Post date:** [March 13, 2012, 8:41pm UTC](https://forums.speedlife.net/t/wheel-fitment-s13/221199/4 "2012-03-13T20:41:57Z")

</div>

> [@derass](#):
>
> run a 225 or 235 that will fit square on the wheel.

This.

Then you can figure out what size spacer you need to make them flush, a 10-15mm would probably make them sit decent depending on height and fender work.

---

<div class="post-metadata">

**Author:** ![moulds](https://avatars.discourse-cdn.com/v4/letter/m/b2d939/32.png) [@moulds](https://forums.speedlife.net/u/moulds)\
**Post date:** [March 13, 2012, 9:55pm UTC](https://forums.speedlife.net/t/wheel-fitment-s13/221199/5 "2012-03-13T21:55:41Z")

</div>

so a 225/50/15 n spacers…an as far as spacers go what thickness do you have to get longer studs

---

<div class="post-metadata">

**Author:** ![OneEightZero](https://avatars.discourse-cdn.com/v4/letter/o/c6cbf5/32.png) [@OneEightZero](https://forums.speedlife.net/u/OneEightZero)\
**Post date:** [March 13, 2012, 10:32pm UTC](https://forums.speedlife.net/t/wheel-fitment-s13/221199/6 "2012-03-13T22:32:50Z")

</div>

Mount it  
Measure it  
Fix it

---

<div class="post-metadata">

**Author:** ![Benjai](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/benjai/32/6122_2.png) [@Benjai](https://forums.speedlife.net/u/Benjai)\
**Post date:** [March 13, 2012, 10:36pm UTC](https://forums.speedlife.net/t/wheel-fitment-s13/221199/7 "2012-03-13T22:36:55Z")

</div>

> [@OneEightZero](#):
>
> Mount it  
> Measure it  
> Fix it

Man speaks the truth.

(Protip: 15mm spacers, need studs)