# wheel hub/stud help... please and thank you!

**URL:** <https://forums.speedlife.net/t/wheel-hub-stud-help-please-and-thank-you/111346>\
**Category:** SON240sx Automotive\
**Created:** [November 25, 2007, 8:15pm UTC](https://forums.speedlife.net/t/wheel-hub-stud-help-please-and-thank-you/111346 "2007-11-25T20:15:31Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![schen04](https://avatars.discourse-cdn.com/v4/letter/s/dbc845/32.png) [@schen04](https://forums.speedlife.net/u/schen04)\
**Post date:** [November 25, 2007, 8:15pm UTC](https://forums.speedlife.net/t/wheel-hub-stud-help-please-and-thank-you/111346/1 "2007-11-25T20:15:31Z")

</div>

well anyways so i threaded one of the wheel studs… i really need my car to get to and from work. now would my best option be to just change the stud if possible or should i purchase a whole wheel hub? its for the front passenger side 4 lug. Its pretty bad when driving the wheel is pretty damn wobbily i guess u can say.

---

<div class="post-metadata">

**Author:** ![sidewayz240](https://avatars.discourse-cdn.com/v4/letter/s/e99b99/32.png) [@sidewayz240](https://forums.speedlife.net/u/sidewayz240)\
**Post date:** [November 25, 2007, 8:20pm UTC](https://forums.speedlife.net/t/wheel-hub-stud-help-please-and-thank-you/111346/2 "2007-11-25T20:20:37Z")

</div>

hammer the old stud out, get a new one (dealer sells them for sure). Hammer it in then tighten the lug nut with the wheel on to properly seat the stud

---

<div class="post-metadata">

**Author:** ![schen04](https://avatars.discourse-cdn.com/v4/letter/s/dbc845/32.png) [@schen04](https://forums.speedlife.net/u/schen04)\
**Post date:** [November 25, 2007, 8:23pm UTC](https://forums.speedlife.net/t/wheel-hub-stud-help-please-and-thank-you/111346/3 "2007-11-25T20:23:59Z")

</div>

thank you for the quick reply.

---

<div class="post-metadata">

**Author:** ![Theo23](https://avatars.discourse-cdn.com/v4/letter/t/43a26b/32.png) [@Theo23](https://forums.speedlife.net/u/Theo23)\
**Post date:** [November 25, 2007, 8:32pm UTC](https://forums.speedlife.net/t/wheel-hub-stud-help-please-and-thank-you/111346/4 "2007-11-25T20:32:08Z")

</div>

If the wheel is wobbly when you have the other 3 lugs tight, there is more wrong. You may have to install 4 new ones. They are super cheap from UAP, so it would be worth it to do all 4. If the wheel has been wobbling there is going to be damage to more than just one stud.

Good luck man.

Theo