# Wheel offset shaving? **URL:** \ **Category:** Shift518 Automotive\ **Created:** [March 29, 2011, 12:33pm UTC](https://forums.speedlife.net/t/wheel-offset-shaving/257576 "2011-03-29T12:33:12Z")\ **Posts on this page:** 1\ **Showing post:** 47
**Author:** ![slwrthnu](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slwrthnu/32/6296_2.png) [@slwrthnu](https://forums.speedlife.net/u/slwrthnu)\ **Post date:** [March 30, 2011, 2:02pm UTC](https://forums.speedlife.net/t/wheel-offset-shaving/257576/47 "2011-03-30T14:02:10Z")
> [@New wheels what do you guys think?](https://forums.speedlife.net/t/new-wheels-what-do-you-guys-think/40706/20): > > I mentioned getting fenders rolled and he was still worried about it… I just dont wanna run into problems. I trust what your saying though… I asked what my other options are lets see what he says… if you want to stop by i can look at your fenders but i doubt there would be an issue after a role if 43 will not rub and all your ordering is a 35, 8mm difference is .3" (rounded) so unless you basically have no fender lip (which a few cars dont) i don’t see how you would have an issue after rolling them. i’ve never rolled a g8 fenders so i could be wrong but going from my experience i’d say you would be fine, and thats also why you don’t roll fenders till you have the wheels and tires, that way you make sure they don’t rub. --- _[View the full topic](https://forums.speedlife.net/t/wheel-offset-shaving/257576)._