# Where can I find this....

**URL:** https://forums.speedlife.net/t/where-can-i-find-this/96788
**Category:** SON240sx Automotive
**Created:** [June 10, 2006, 7:54am UTC](https://forums.speedlife.net/t/where-can-i-find-this/96788 "2006-06-10T07:54:11Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![s13Junkyard](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13junkyard/32/5502_2.png) [@s13Junkyard](https://forums.speedlife.net/u/s13Junkyard)
#### Post date: [June 10, 2006, 7:54am UTC](https://forums.speedlife.net/t/where-can-i-find-this/96788/1 "2006-06-10T07:54:11Z")

</div>

![http://www.jambrass.com/images/washers1.jpg](http://www.jambrass.com/images/washers1.jpg)

im looking for a copper washer dunno the size i jsut have the banjo bolt to match it up with

where can i find this in GTA (etobicoke)

ive tried Crappy Tire, Partsource, napa, fincham, performance improvements lol

any ideas called cisco they said they dont have either…

UGHHHH

---

<div class="post-metadata">

### Author: ![Uniac](https://avatars.discourse-cdn.com/v4/letter/u/34f0e0/32.png) [@Uniac](https://forums.speedlife.net/u/Uniac)
#### Post date: [June 10, 2006, 7:58am UTC](https://forums.speedlife.net/t/where-can-i-find-this/96788/2 "2006-06-10T07:58:30Z")

</div>

any hydrolic supply shop…usually open saturdays until noon.

---

<div class="post-metadata">

### Author: ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)
#### Post date: [June 10, 2006, 8:56am UTC](https://forums.speedlife.net/t/where-can-i-find-this/96788/3 "2006-06-10T08:56:52Z")

</div>

if worse comes to worse, you could buy a sheet of copper and make your own.

---

<div class="post-metadata">

### Author: ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [June 10, 2006, 9:02am UTC](https://forums.speedlife.net/t/where-can-i-find-this/96788/4 "2006-06-10T09:02:20Z")

</div>

> [@Avery](#):
>
> ive tried Crappy Tire, Partsource, napa, fincham, performance improvements lol

thats weird… I just picked up some last week @ napa and they had boxes and boxes of different sizes

> [@mikeness](#):
>
> if worse comes to worse, you could buy a sheet of copper and make your own.

that works too but you need a proper punch set to pull it off. I guess you could use a drill as well with a big bit and a small bit

---

<div class="post-metadata">

### Author: ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)
#### Post date: [June 10, 2006, 9:04am UTC](https://forums.speedlife.net/t/where-can-i-find-this/96788/5 "2006-06-10T09:04:35Z")

</div>

is it for the Turbo Banjo?? so 14mm or 12mm??

what works great are the stat-o-seal washers,  
they actually have them for oil pan drain bolts  
they are a metal washer with a rubber center.

at all CT

---

<div class="post-metadata">

### Author: ![s13Junkyard](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13junkyard/32/5502_2.png) [@s13Junkyard](https://forums.speedlife.net/u/s13Junkyard)
#### Post date: [June 10, 2006, 10:19am UTC](https://forums.speedlife.net/t/where-can-i-find-this/96788/6 "2006-06-10T10:19:13Z")

</div>

i ended up going to a few other canadian tires and finally finding one thanks anyway boys