# Where can I get brazing rods for aluminum?

**URL:** <https://forums.speedlife.net/t/where-can-i-get-brazing-rods-for-aluminum/202482>\
**Category:** PittSpeed Off Topic\
**Created:** [April 9, 2009, 3:04pm UTC](https://forums.speedlife.net/t/where-can-i-get-brazing-rods-for-aluminum/202482 "2009-04-09T15:04:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![czwalga00gt](https://avatars.discourse-cdn.com/v4/letter/c/6bbea6/32.png) [@czwalga00gt](https://forums.speedlife.net/u/czwalga00gt)\
**Post date:** [April 9, 2009, 3:04pm UTC](https://forums.speedlife.net/t/where-can-i-get-brazing-rods-for-aluminum/202482/1 "2009-04-09T15:04:39Z")

</div>

My ruel rail as a slight leak because i closed the hood with the fuel pressure gauge on. Its just bubbling out of the fitting that is brazed on to the rail itself.

I was hoping to get the car to the dyno on saturday.

---

<div class="post-metadata">

**Author:** ![slowcamaro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slowcamaro/32/5975_2.png) [@slowcamaro](https://forums.speedlife.net/u/slowcamaro)\
**Post date:** [April 9, 2009, 4:36pm UTC](https://forums.speedlife.net/t/where-can-i-get-brazing-rods-for-aluminum/202482/2 "2009-04-09T16:36:09Z")

</div>

ask jeff@first try

---

<div class="post-metadata">

**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\
**Post date:** [April 9, 2009, 4:52pm UTC](https://forums.speedlife.net/t/where-can-i-get-brazing-rods-for-aluminum/202482/3 "2009-04-09T16:52:45Z")

</div>

i could weld it up for you. if you can take fuel rail off i can take care of it tomo afternoon.

---

<div class="post-metadata">

**Author:** ![czwalga00gt](https://avatars.discourse-cdn.com/v4/letter/c/6bbea6/32.png) [@czwalga00gt](https://forums.speedlife.net/u/czwalga00gt)\
**Post date:** [April 9, 2009, 9:01pm UTC](https://forums.speedlife.net/t/where-can-i-get-brazing-rods-for-aluminum/202482/4 "2009-04-09T21:01:26Z")

</div>

^ Nice! I’ll give you a call morning/afternoon. It shouldn’t take long.

---

<div class="post-metadata">

**Author:** ![The1SloR\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/the1slor_t/32/5984_2.png) [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)\
**Post date:** [April 10, 2009, 12:05pm UTC](https://forums.speedlife.net/t/where-can-i-get-brazing-rods-for-aluminum/202482/5 "2009-04-10T12:05:06Z")

</div>

> [@My brother-in-law shot an elk](https://forums.speedlife.net/t/my-brother-in-law-shot-an-elk/40086/8):
>
> i could weld it up for you. if you can take fuel rail off i can take care of it tomo afternoon.

no balls! weld it while its on the car 😃

only place I can think of would be jackson welding supply down on carson. But you might as well just have jeff do it since he knows what he’s doing