# Where does this connect to?(Pictures included) **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [April 28, 2007, 7:04pm UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571 "2007-04-28T19:04:01Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![usdm.s13](https://avatars.discourse-cdn.com/v4/letter/u/9e8a1a/32.png) [@usdm.s13](https://forums.speedlife.net/u/usdm.s13)\ **Post date:** [April 28, 2007, 7:04pm UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/1 "2007-04-28T19:04:01Z")
Hey Guys, My question is from my picture tube A vents from the valve cover(its just covered by the strut bar in the picture) am I able to directly route it to the line C which is currently capped off? What is the black canister labeled B? I’ve heard from a friend that its useless and I can just directly bypass it and remove it…true?. Thanks for your help guys! ![http://i95.photobucket.com/albums/l141/spencer012/037-1.jpg](http://i95.photobucket.com/albums/l141/spencer012/037-1.jpg) ---
**Author:** ![imported\_brian](https://avatars.discourse-cdn.com/v4/letter/i/b3f665/32.png) [@imported\_brian](https://forums.speedlife.net/u/imported_brian)\ **Post date:** [April 29, 2007, 3:08am UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/2 "2007-04-29T03:08:10Z")
I know lots of people have done this to tidy up the engine bay. I havn’t played around with an sr in a week or two now but I seem to recall a tube going into the bottom of that canister, thats where you’d connect that hose from the valve cover to. (assuming it exists) ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [April 29, 2007, 9:08am UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/3 "2007-04-29T09:08:10Z")
It is an oil separator. It “can” be removed, but why would you? Just paint it. There is a tube coming out from the bottom of the can. Use a similar black hose and hook it up to “C”, assuming that is coming out of the block. If so, it just runs there. ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [April 29, 2007, 9:49am UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/4 "2007-04-29T09:49:58Z")
I think C is where your AIV connects to your stock Turbo elbow. The bottom hose is almost directly under that can. IF you do remove it make sure you add a catch can on the front hose on that Tee and make sure the other half of the can is hooked up to before your turbo ---
**Author:** ![usdm.s13](https://avatars.discourse-cdn.com/v4/letter/u/9e8a1a/32.png) [@usdm.s13](https://forums.speedlife.net/u/usdm.s13)\ **Post date:** [April 30, 2007, 3:47pm UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/5 "2007-04-30T15:47:15Z")
Awesome thanks for the help guys! ---
**Author:** ![imported\_brian](https://avatars.discourse-cdn.com/v4/letter/i/b3f665/32.png) [@imported\_brian](https://forums.speedlife.net/u/imported_brian)\ **Post date:** [April 30, 2007, 8:32pm UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/6 "2007-04-30T20:32:53Z")
so whats that ugly box do? ---
**Author:** ![Jason\_Lange](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@Jason\_Lange](https://forums.speedlife.net/u/Jason_Lange)\ **Post date:** [May 2, 2007, 3:55pm UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/7 "2007-05-02T15:55:20Z")
Garbage throw that shit out. ---
**Author:** ![TravyPoo](https://avatars.discourse-cdn.com/v4/letter/t/838e76/32.png) [@TravyPoo](https://forums.speedlife.net/u/TravyPoo)\ **Post date:** [May 2, 2007, 3:57pm UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/8 "2007-05-02T15:57:58Z")
i took it out and just ran a section of hose ---
**Author:** ![AdamP](https://avatars.discourse-cdn.com/v4/letter/a/b19c9b/32.png) [@AdamP](https://forums.speedlife.net/u/AdamP)\ **Post date:** [May 2, 2007, 6:30pm UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/9 "2007-05-02T18:30:54Z")
OT: but you aren’t running the headshield on the manifold there. I that fine to do? ---
**Author:** ![Jason\_Lange](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@Jason\_Lange](https://forums.speedlife.net/u/Jason_Lange)\ **Post date:** [May 2, 2007, 7:51pm UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/10 "2007-05-02T19:51:50Z")
> [@AdamP](#): > > OT: but you aren’t running the headshield on the manifold there. I that fine to do? It isn’t going to get any hotter than an aftermarket one. ---
**Author:** ![beatshack](https://avatars.discourse-cdn.com/v4/letter/b/f0a364/32.png) [@beatshack](https://forums.speedlife.net/u/beatshack)\ **Post date:** [May 3, 2007, 9:30am UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/11 "2007-05-03T09:30:13Z")
all it will do is make hoses & vacuum lines dry out and crack sooner, but thats like…years and years down the road… ---
**Author:** ![usdm.s13](https://avatars.discourse-cdn.com/v4/letter/u/9e8a1a/32.png) [@usdm.s13](https://forums.speedlife.net/u/usdm.s13)\ **Post date:** [May 3, 2007, 12:11pm UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/12 "2007-05-03T12:11:39Z")
> [@TravyPoo](#): > > i took it out and just ran a section of hose So you ran a section of hose from “A” to “C” and eliminated “B” without any problems? ---
**Author:** ![s14sr20det](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@s14sr20det](https://forums.speedlife.net/u/s14sr20det)\ **Post date:** [May 7, 2007, 2:10pm UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/13 "2007-05-07T14:10:05Z")
This spencer? Anywho, you can take it out if you want, but you might as well just hook it up properly with sections of hose. It’s kinda like a ghetto catch can. ---
**Author:** ![usdm.s13](https://avatars.discourse-cdn.com/v4/letter/u/9e8a1a/32.png) [@usdm.s13](https://forums.speedlife.net/u/usdm.s13)\ **Post date:** [May 7, 2007, 6:07pm UTC](https://forums.speedlife.net/t/where-does-this-connect-to-pictures-included/146571/14 "2007-05-07T18:07:00Z")
> [@s14sr20det](#): > > This spencer? > > Anywho, you can take it out if you want, but you might as well just hook it up properly with sections of hose. It’s kinda like a ghetto catch can. Yeah steve its me. But I think I have it figured out. Thanks for everyones help