# where to get a block honed/bored? **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [February 1, 2010, 11:15am UTC](https://forums.speedlife.net/t/where-to-get-a-block-honed-bored/78824 "2010-02-01T11:15:35Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![stmotorsports](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@stmotorsports](https://forums.speedlife.net/u/stmotorsports)\ **Post date:** [February 1, 2010, 11:15am UTC](https://forums.speedlife.net/t/where-to-get-a-block-honed-bored/78824/1 "2010-02-01T11:15:35Z")
whats a good shop in the amherst/buffalo area that could do this for me reasonably cheap? I probably want to have it hot tanked & magnafluxed as well, etc. The block in question is an acura gsr B18C1, dunno if it matters. anyone? ---
**Author:** ![mindless](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mindless/32/7286_2.png) [@mindless](https://forums.speedlife.net/u/mindless)\ **Post date:** [February 1, 2010, 1:03pm UTC](https://forums.speedlife.net/t/where-to-get-a-block-honed-bored/78824/2 "2010-02-01T13:03:19Z")
I had my shit done at Oddys been running well ever since. ---
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [February 1, 2010, 1:04pm UTC](https://forums.speedlife.net/t/where-to-get-a-block-honed-bored/78824/3 "2010-02-01T13:04:35Z")
ive heard klespies on camp in hamburg does good work ---
**Author:** ![turbominime4door](https://avatars.discourse-cdn.com/v4/letter/t/bbe5ce/32.png) [@turbominime4door](https://forums.speedlife.net/u/turbominime4door)\ **Post date:** [February 1, 2010, 2:21pm UTC](https://forums.speedlife.net/t/where-to-get-a-block-honed-bored/78824/4 "2010-02-01T14:21:12Z")
jims cylinder head down on hinman ave tell him ron fitch sent you ---
**Author:** ![FoxyHonda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/foxyhonda/32/5425_2.png) [@FoxyHonda](https://forums.speedlife.net/u/FoxyHonda)\ **Post date:** [February 1, 2010, 2:29pm UTC](https://forums.speedlife.net/t/where-to-get-a-block-honed-bored/78824/5 "2010-02-01T14:29:43Z")
J&L did my crx motor. He does an awesome job. He’s on Walden Ave.(lancaster)… ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [February 1, 2010, 2:30pm UTC](https://forums.speedlife.net/t/where-to-get-a-block-honed-bored/78824/6 "2010-02-01T14:30:26Z")
> [@mindless](#): > > I had my shit done at Oddys been running well ever since. +1 for Oddys they did my block work on my current build ---
**Author:** ![onefst240](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onefst240/32/7224_2.png) [@onefst240](https://forums.speedlife.net/u/onefst240)\ **Post date:** [February 1, 2010, 4:22pm UTC](https://forums.speedlife.net/t/where-to-get-a-block-honed-bored/78824/7 "2010-02-01T16:22:07Z")
This place is not in buffalo but its only 20 mins into canada. They do all my dads engine work on his 1000hp bbc. I can get you a number if ya want. ---
**Author:** ![ubengineering](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ubengineering/32/5171_2.png) [@ubengineering](https://forums.speedlife.net/u/ubengineering)\ **Post date:** [February 1, 2010, 5:16pm UTC](https://forums.speedlife.net/t/where-to-get-a-block-honed-bored/78824/8 "2010-02-01T17:16:29Z")
> [@FoxyHonda](#): > > J&L did my crx motor. He does an awesome job. He’s on Walden Ave.(lancaster)… x2 ---
**Author:** ![stmotorsports](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@stmotorsports](https://forums.speedlife.net/u/stmotorsports)\ **Post date:** [February 2, 2010, 7:44am UTC](https://forums.speedlife.net/t/where-to-get-a-block-honed-bored/78824/9 "2010-02-02T07:44:59Z")
lol I just remembered I used to work with Dave Oddy, haven’t had them do anything for me yet tho I had J&L do some stuff for me years ago on my 240z I don’t need anything crazy like a sleeve job or anything, like I said just a hone and bore if necessary… alright I’ll make some calls thanks guys ---
**Author:** ![psychopjv](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psychopjv/32/7251_2.png) [@psychopjv](https://forums.speedlife.net/u/psychopjv)\ **Post date:** [February 2, 2010, 8:10am UTC](https://forums.speedlife.net/t/where-to-get-a-block-honed-bored/78824/10 "2010-02-02T08:10:52Z")
Oddy’s did the work on my LS1 and i couldn’t be happier with it. ---
**Author:** ![95BLKHaTCH](https://avatars.discourse-cdn.com/v4/letter/9/a587f6/32.png) [@95BLKHaTCH](https://forums.speedlife.net/u/95BLKHaTCH)\ **Post date:** [February 5, 2010, 2:07pm UTC](https://forums.speedlife.net/t/where-to-get-a-block-honed-bored/78824/11 "2010-02-05T14:07:07Z")
oddy does good work, theres also northeast machine on two mile creek rd in tonawanda they do all the stuff for my work.