# Where's a good place to have a roll cage made? close to GTA preferrably **URL:** \ **Category:** SON240sx Automotive\ **Created:** [June 18, 2012, 1:49pm UTC](https://forums.speedlife.net/t/wheres-a-good-place-to-have-a-roll-cage-made-close-to-gta-preferrably/223954 "2012-06-18T13:49:03Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![G-E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/g-e/32/5546_2.png) [@G-E](https://forums.speedlife.net/u/G-E)\ **Post date:** [June 18, 2012, 1:49pm UTC](https://forums.speedlife.net/t/wheres-a-good-place-to-have-a-roll-cage-made-close-to-gta-preferrably/223954/1 "2012-06-18T13:49:03Z")
I searched and I saw two recommendations, but they are old posts… I have a completely gutted non-240sx that needs a cage, something I can legally use on a road course as well as drift, car also needs some minor body work Also, I have the time to help work on it, if anyone would be amenable to that? ---
**Author:** ![Cadence](https://avatars.discourse-cdn.com/v4/letter/c/9e8a1a/32.png) [@Cadence](https://forums.speedlife.net/u/Cadence)\ **Post date:** [June 18, 2012, 2:36pm UTC](https://forums.speedlife.net/t/wheres-a-good-place-to-have-a-roll-cage-made-close-to-gta-preferrably/223954/2 "2012-06-18T14:36:42Z")
centerline motorsports in brampton 🙂 [http://www.facebook.com/Centerlinemotorsports](http://www.facebook.com/Centerlinemotorsports) ---
**Author:** ![Martino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/martino/32/5674_2.png) [@Martino](https://forums.speedlife.net/u/Martino)\ **Post date:** [June 18, 2012, 9:09pm UTC](https://forums.speedlife.net/t/wheres-a-good-place-to-have-a-roll-cage-made-close-to-gta-preferrably/223954/3 "2012-06-18T21:09:25Z")
Rene @ [Centerline Motorsports](http://www.facebook.com/Centerlinemotorsports) Speaking from experience, Rene is one of the best fabricators around. My cage was done by him. Other than my door bars (which will be added in later) the cage is to the bare minimum spec for any pro drift competition rule book (I.E DMCC, FD, XDC…etc). It will also be street driven. ![https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/374873_2486853864728_945343411_n.jpg](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/374873_2486853864728_945343411_n.jpg) ---
**Author:** ![Aaj2k5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aaj2k5/32/5731_2.png) [@Aaj2k5](https://forums.speedlife.net/u/Aaj2k5)\ **Post date:** [June 20, 2012, 11:46am UTC](https://forums.speedlife.net/t/wheres-a-good-place-to-have-a-roll-cage-made-close-to-gta-preferrably/223954/4 "2012-06-20T11:46:43Z")
Martino - might be the pic but it looks like your main hoop is not 180 +/- 10\*… ---
**Author:** ![Martino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/martino/32/5674_2.png) [@Martino](https://forums.speedlife.net/u/Martino)\ **Post date:** [June 20, 2012, 2:20pm UTC](https://forums.speedlife.net/t/wheres-a-good-place-to-have-a-roll-cage-made-close-to-gta-preferrably/223954/5 "2012-06-20T14:20:44Z")
> [@Aaj2k5](#): > > Martino - might be the pic but it looks like your main hoop is not 180 +/- 10\*… That’s 'cause it’s 72 +/- 2\*… ---
**Author:** ![Aaj2k5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aaj2k5/32/5731_2.png) [@Aaj2k5](https://forums.speedlife.net/u/Aaj2k5)\ **Post date:** [June 20, 2012, 5:16pm UTC](https://forums.speedlife.net/t/wheres-a-good-place-to-have-a-roll-cage-made-close-to-gta-preferrably/223954/6 "2012-06-20T17:16:10Z")
Might want to check your “bare minimum spec for any pro drift competition rule book (I.E DMCC, FD, XDC…etc)” because that won’t fly. > 7.4.6 Main hoop: > The main roll hoop (behind the driver) shall extend the full width of the driver/passenger compartment and shall be as near the roof as possible with a maximum of 4 bends, totalling 180 degrees ± 10 degrees. Pretty well the same spec for any competition in Canada. ---
**Author:** ![Martino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/martino/32/5674_2.png) [@Martino](https://forums.speedlife.net/u/Martino)\ **Post date:** [June 20, 2012, 11:54pm UTC](https://forums.speedlife.net/t/wheres-a-good-place-to-have-a-roll-cage-made-close-to-gta-preferrably/223954/7 "2012-06-20T23:54:22Z")
I guess I forgot the [sarcasm] [/ sarcasm] bb code ---
**Author:** ![Aaj2k5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aaj2k5/32/5731_2.png) [@Aaj2k5](https://forums.speedlife.net/u/Aaj2k5)\ **Post date:** [June 21, 2012, 9:32am UTC](https://forums.speedlife.net/t/wheres-a-good-place-to-have-a-roll-cage-made-close-to-gta-preferrably/223954/8 "2012-06-21T09:32:12Z")
Yah I kinda figured that, but for OP and everyone else getting a cage fabbed that “meets any spec”, make sure u do ur research so your fabricator can fix their mistake before finding out that they won’t let you onto the track.