# which sfc's... **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [April 25, 2005, 7:47am UTC](https://forums.speedlife.net/t/which-sfcs/173903 "2005-04-25T07:47:20Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![lt1power](https://avatars.discourse-cdn.com/v4/letter/l/ea666f/32.png) [@lt1power](https://forums.speedlife.net/u/lt1power)\ **Post date:** [April 25, 2005, 7:47am UTC](https://forums.speedlife.net/t/which-sfcs/173903/1 "2005-04-25T07:47:20Z")
which one’s should i get? I like the kenny brown DD SFC’s but i heard about ground clearance problems with them. Keep in mind I already have a pro kit on my car so ground clearance is a concern. If the kenny brown’s are a no go then i’m gonna get some bmr sfc’s, along with some relocator brackets. Then all i need is a torque arm and i’m done with my suspension forever. Yayyyyy!!! ---
**Author:** ![oneslowbowtie](https://avatars.discourse-cdn.com/v4/letter/o/d78d45/32.png) [@oneslowbowtie](https://forums.speedlife.net/u/oneslowbowtie)\ **Post date:** [April 25, 2005, 8:08am UTC](https://forums.speedlife.net/t/which-sfcs/173903/2 "2005-04-25T08:08:49Z")
I have the SLP ones and I dont have clearence problems but I still have stock ride height. My exhaust hangs lower then my SFC’s. Hope that helps you out some. ---
**Author:** ![lt1power](https://avatars.discourse-cdn.com/v4/letter/l/ea666f/32.png) [@lt1power](https://forums.speedlife.net/u/lt1power)\ **Post date:** [April 25, 2005, 8:46am UTC](https://forums.speedlife.net/t/which-sfcs/173903/3 "2005-04-25T08:46:12Z")
u have hooker long tubes right? I’ll be going with some SLP shorties, just b/c LT’s hang so low… Did the SLP SFC’s make a difference, i’ll prob go with the bmr ones just b/c they’re cheaper and do the same thing instead of the Kenny Brown’s. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [April 25, 2005, 9:13am UTC](https://forums.speedlife.net/t/which-sfcs/173903/4 "2005-04-25T09:13:59Z")
both are good,i got spohn weld on that i like to! ---
**Author:** ![EXTtoG35](https://avatars.discourse-cdn.com/v4/letter/e/67e7ee/32.png) [@EXTtoG35](https://forums.speedlife.net/u/EXTtoG35)\ **Post date:** [April 25, 2005, 8:03pm UTC](https://forums.speedlife.net/t/which-sfcs/173903/5 "2005-04-25T20:03:18Z")
My BMR’s were welded poorly. Not the install, the actual welds on the SFCs. The whole thing was twisted and the driver side SFC didn’t line up right at ALL. -j ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [April 26, 2005, 3:44am UTC](https://forums.speedlife.net/t/which-sfcs/173903/6 "2005-04-26T03:44:51Z")
um…i have some that a guy made off of the SLP desgin…they are the excat same!!! i have put mine on yet though…ill let u look at em!!! ---
**Author:** ![Silver\_WS6](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@Silver\_WS6](https://forums.speedlife.net/u/Silver_WS6)\ **Post date:** [April 26, 2005, 8:55am UTC](https://forums.speedlife.net/t/which-sfcs/173903/7 "2005-04-26T08:55:18Z")
my chasis is twisted and i didnt notice till it was up ona lift ☹ id get them asap !!! the slp’s were good and i could take corners alot faster than before but id go to the spohns if i had to do it again ! a lil better clerance and also you can runa beefy torque arm later on.