# Who Can Weld Bung Into Stainless? **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [July 21, 2009, 7:28pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243 "2009-07-21T19:28:57Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![HLxDrummer](https://avatars.discourse-cdn.com/v4/letter/h/e274bd/32.png) [@HLxDrummer](https://forums.speedlife.net/u/HLxDrummer)\ **Post date:** [July 21, 2009, 7:28pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/1 "2009-07-21T19:28:57Z")
Well, I think I’m going to need a bung welded into my test pipe for my wideband. I’ll have the test pipe off of the car and can probably drill the hole for it, but would prefer someone else do it. How much, and who does a good job? I would like someone near Irwin/Greensburg/Monroeville if possible. Thanks guys! ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [July 21, 2009, 8:14pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/2 "2009-07-21T20:14:50Z")
i am out near robinson but i can do it if you can’t find anyone local. ---
**Author:** ![Sinner6.0L](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sinner6.0l/32/6016_2.png) [@Sinner6.0L](https://forums.speedlife.net/u/Sinner6.0L)\ **Post date:** [July 21, 2009, 8:21pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/3 "2009-07-21T20:21:56Z")
jeff did mine ---
**Author:** ![Lazylaser](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lazylaser/32/6033_2.png) [@Lazylaser](https://forums.speedlife.net/u/Lazylaser)\ **Post date:** [July 21, 2009, 8:26pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/4 "2009-07-21T20:26:44Z")
bgblockelcamino has done a half dozen of mine now, he’s worth the drive. ---
**Author:** ![vtecsol](https://avatars.discourse-cdn.com/v4/letter/v/b5ac83/32.png) [@vtecsol](https://forums.speedlife.net/u/vtecsol)\ **Post date:** [July 21, 2009, 8:59pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/5 "2009-07-21T20:59:53Z")
HYBRIDYNAMICS in derry ---
**Author:** ![SoLow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/solow/32/6001_2.png) [@SoLow](https://forums.speedlife.net/u/SoLow)\ **Post date:** [July 22, 2009, 7:00am UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/6 "2009-07-22T07:00:01Z")
If you dont want to make the trip to Jeff’s shop (bgblockelcamino) shop in Robinson try **Brian @ JJ’s Automotive in Mt. Pleasant, PA 724-547-2959** or **Kurt @ K-Tech Welding & Performance in Ruffsdale, PA 724-640-4100** which both are only about 20mins from Irwin & both are capable of handling your needs ---
**Author:** ![06se-r](https://avatars.discourse-cdn.com/v4/letter/0/c5a1d2/32.png) [@06se-r](https://forums.speedlife.net/u/06se-r)\ **Post date:** [July 22, 2009, 11:45am UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/7 "2009-07-22T11:45:26Z")
jeff in robinson, or hybrid did the one for me before also. ---
**Author:** ![HLxDrummer](https://avatars.discourse-cdn.com/v4/letter/h/e274bd/32.png) [@HLxDrummer](https://forums.speedlife.net/u/HLxDrummer)\ **Post date:** [July 22, 2009, 2:49pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/8 "2009-07-22T14:49:42Z")
Thanks for all the replies! I’ve heard great things about Jeff, but unfourtunately he is a little too far for me for something as simple as this. However, if I am in the area I will definitely go to him 🙂 Since Derry is relatively close and Hybrid Dynamics seems reputable, I’ll most likely end up going to them. Any idea on a rough price? $20? Thanks again guys. ---
**Author:** ![The1SloR\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/the1slor_t/32/5984_2.png) [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)\ **Post date:** [July 22, 2009, 3:25pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/9 "2009-07-22T15:25:04Z")
bahh bah bajh bah bah bah ---
**Author:** ![vtecsol](https://avatars.discourse-cdn.com/v4/letter/v/b5ac83/32.png) [@vtecsol](https://forums.speedlife.net/u/vtecsol)\ **Post date:** [July 22, 2009, 5:40pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/10 "2009-07-22T17:40:22Z")
> [@RIP MARIO \*SHOWTIME69\*](https://forums.speedlife.net/t/rip-mario-showtime69/40655/103): > > Thanks for all the replies! > > I’ve heard great things about Jeff, but unfourtunately he is a little too far for me for something as simple as this. However, if I am in the area I will definitely go to him 🙂 > > Since Derry is relatively close and Hybrid Dynamics seems reputable, I’ll most likely end up going to them. Any idea on a rough price? $20? > > Thanks again guys. NOt sure i just do the ecu stuff call denis @ the shop 724-925-2660 ---
**Author:** ![4\_door\_love](https://avatars.discourse-cdn.com/v4/letter/4/e19b73/32.png) [@4\_door\_love](https://forums.speedlife.net/u/4_door_love)\ **Post date:** [July 23, 2009, 5:30am UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/11 "2009-07-23T05:30:51Z")
contact gombos he will do it for a case of beer!! ---
**Author:** ![HLxDrummer](https://avatars.discourse-cdn.com/v4/letter/h/e274bd/32.png) [@HLxDrummer](https://forums.speedlife.net/u/HLxDrummer)\ **Post date:** [July 23, 2009, 4:03pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/12 "2009-07-23T16:03:41Z")
I take it Hybrid isn’t a forum sponsor? I like supporting them on any board I’m on, but not at the expense of driving double the distance so they can make less than $20 lol I called Hybrid, however, and they were really nice and quoted me $20 with me bringing in the test pipe off the car and the bung. Zach, (or is it Zac? lol) I am going to get Gombos to weld my DSM SMICs someday, but I didn’t know he could weld stainless as well. May have him do it 🙂 Thanks for the suggestion. ---
**Author:** ![HLxDrummer](https://avatars.discourse-cdn.com/v4/letter/h/e274bd/32.png) [@HLxDrummer](https://forums.speedlife.net/u/HLxDrummer)\ **Post date:** [July 29, 2009, 9:32pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/13 "2009-07-29T21:32:24Z")
Well I went to Hybrid today (took me a few tries to find it :p) and they TIG’d a bung in for me. The one that came with my LC1 was an “extended bung” which I thought was pretty big, but I never installed a wideband/bung before but when I took it to Hybrid they said it was too big (the sensor didn’t really even stick out of it when fully seated) and gave me a stainless bung for $5. After it was all said and done it looks like they did a great job (I think Dennis welded it in for me) and it only cost $25 including the cost of the bung. Everyone there was also really nice although they were busy today and they also managed to fit in time to do this for me without much notice. Thanks Hybrid! ---
**Author:** ![vtecsol](https://avatars.discourse-cdn.com/v4/letter/v/b5ac83/32.png) [@vtecsol](https://forums.speedlife.net/u/vtecsol)\ **Post date:** [July 30, 2009, 3:44am UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/14 "2009-07-30T03:44:32Z")
good deal ---
**Author:** ![brewer15650](https://avatars.discourse-cdn.com/v4/letter/b/858c86/32.png) [@brewer15650](https://forums.speedlife.net/u/brewer15650)\ **Post date:** [July 30, 2009, 1:23pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/15 "2009-07-30T13:23:53Z")
Dennis Seagal is the man! ---
**Author:** ![Flywheel](https://avatars.discourse-cdn.com/v4/letter/f/eb8c5e/32.png) [@Flywheel](https://forums.speedlife.net/u/Flywheel)\ **Post date:** [July 30, 2009, 2:33pm UTC](https://forums.speedlife.net/t/who-can-weld-bung-into-stainless/203243/16 "2009-07-30T14:33:25Z")
> [@RIP MARIO \*SHOWTIME69\*](https://forums.speedlife.net/t/rip-mario-showtime69/40655/91): > > i am out near robinson but i can do it if you can’t find anyone local. wow i just clicked your link, i’ve been past your shop a dozen of times. next time i need any work done i’ll look up you for sure 🙂