# who does sr20 rebuilds

**URL:** <https://forums.speedlife.net/t/who-does-sr20-rebuilds/208823>\
**Category:** SON240sx Automotive\
**Created:** [February 3, 2011, 7:44am UTC](https://forums.speedlife.net/t/who-does-sr20-rebuilds/208823 "2011-02-03T07:44:03Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![RustyS13](https://avatars.discourse-cdn.com/v4/letter/r/b38774/32.png) [@RustyS13](https://forums.speedlife.net/u/RustyS13)\
**Post date:** [February 3, 2011, 7:44am UTC](https://forums.speedlife.net/t/who-does-sr20-rebuilds/208823/1 "2011-02-03T07:44:03Z")

</div>

HI I have a s14sr blacktop with bad rings i bought cp 89mm pistons still looking for rods but if anyone here knows a good shop that does machine work and has experience with the sr20det let me know. Just wondering if anyone knows a rough price how much it will cost to have pistons, rods + bearings installed maybe rebalance the crank. I would bring the block there, the engine is already removed

---

<div class="post-metadata">

**Author:** ![frankduxx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/frankduxx/32/5647_2.png) [@frankduxx](https://forums.speedlife.net/u/frankduxx)\
**Post date:** [February 3, 2011, 8:06am UTC](https://forums.speedlife.net/t/who-does-sr20-rebuilds/208823/2 "2011-02-03T08:06:03Z")

</div>

gord bush  
416-259-9700

---

<div class="post-metadata">

**Author:** ![Pants](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pants/32/5590_2.png) [@Pants](https://forums.speedlife.net/u/Pants)\
**Post date:** [February 3, 2011, 12:02pm UTC](https://forums.speedlife.net/t/who-does-sr20-rebuilds/208823/3 "2011-02-03T12:02:32Z")

</div>

i get my race car engine built at mississauga engines pm me

---

<div class="post-metadata">

**Author:** ![veloz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/veloz/32/5586_2.png) [@veloz](https://forums.speedlife.net/u/veloz)\
**Post date:** [February 4, 2011, 8:11am UTC](https://forums.speedlife.net/t/who-does-sr20-rebuilds/208823/4 "2011-02-04T08:11:23Z")

</div>

89mm pistons on a stock block?  
That’s 3mm over stock per cylinder!

Gord is great. He is VERY busy though.

---

<div class="post-metadata">

**Author:** ![bennysr20det](https://avatars.discourse-cdn.com/v4/letter/b/e274bd/32.png) [@bennysr20det](https://forums.speedlife.net/u/bennysr20det)\
**Post date:** [February 7, 2011, 3:59pm UTC](https://forums.speedlife.net/t/who-does-sr20-rebuilds/208823/5 "2011-02-07T15:59:03Z")

</div>

GORD BUSH did my motor but didnt take it out yet got other things that i have to do on and in the car still…people say he is the best

---

<div class="post-metadata">

**Author:** ![RustyS13](https://avatars.discourse-cdn.com/v4/letter/r/b38774/32.png) [@RustyS13](https://forums.speedlife.net/u/RustyS13)\
**Post date:** [February 12, 2011, 9:37pm UTC](https://forums.speedlife.net/t/who-does-sr20-rebuilds/208823/6 "2011-02-12T21:37:08Z")

</div>

okay thanks for the recommendations, I’m kind of nervous now about the 89mm pistons I should of done my research before i bought them does anyone see any problem with 89mm and the stock sleeves?