# Who does TIG (stainless steel) welding ? **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [June 18, 2007, 1:44pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620 "2007-06-18T13:44:14Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![rich5150](https://avatars.discourse-cdn.com/v4/letter/r/ce7236/32.png) [@rich5150](https://forums.speedlife.net/u/rich5150)\ **Post date:** [June 18, 2007, 1:44pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/1 "2007-06-18T13:44:14Z")
I have a tiny gap in my 2 pipes near my collector on my 03 COBRA long-tubes. I’d like someone to tack it up if they can. Does anyone know where I can get this done? I’ve checked a few local shops in Fox Chapel, but no one can weld stainless steel. ---
**Author:** ![SoLow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/solow/32/6001_2.png) [@SoLow](https://forums.speedlife.net/u/SoLow)\ **Post date:** [June 18, 2007, 1:56pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/2 "2007-06-18T13:56:50Z")
i’m sure any1 of these site sponsors can take care of u [www.1st-try.com](http://www.1st-try.com) [www.dominationchassis.com](http://www.dominationchassis.com) > **[Rodeheaver's Speed Shop western PA's #1 speed shop](http://www.rodeheavershotrod.com)** > > Check out http://rodeheavershotrod.com! Best speed shop in pennsylvania. Mustang tuning and Mustang performance work. ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [June 18, 2007, 2:23pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/3 "2007-06-18T14:23:12Z")
yep i can take care of it if needed as well as any other shop listed is capable to to do it also ---
**Author:** ![rich5150](https://avatars.discourse-cdn.com/v4/letter/r/ce7236/32.png) [@rich5150](https://forums.speedlife.net/u/rich5150)\ **Post date:** [June 18, 2007, 4:23pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/4 "2007-06-18T16:23:40Z")
> [@TO: Fat guy with green teeth at S&R Cruise Night](https://forums.speedlife.net/t/to-fat-guy-with-green-teeth-at-s-r-cruise-night/30842/10): > > yep i can take care of it if needed as well as any other shop listed is capable to to do it also Ok sounds good, its after 7pm now, but I’ll call you tomorrow and setup a time to do it. **What are your shop hours?** Thanks much for the help. ---
**Author:** ![SoLow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/solow/32/6001_2.png) [@SoLow](https://forums.speedlife.net/u/SoLow)\ **Post date:** [June 18, 2007, 4:25pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/5 "2007-06-18T16:25:33Z")
u can still call him now…i’m almost postive he’s still there ---
**Author:** ![Dominator](https://avatars.discourse-cdn.com/v4/letter/d/a4c791/32.png) [@Dominator](https://forums.speedlife.net/u/Dominator)\ **Post date:** [June 18, 2007, 6:15pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/6 "2007-06-18T18:15:59Z")
I think Jeff might live at the shop? Anyhow, I though I might post a pic of some of our stainless work in case you don’t get to 1st-try. ![http://img.photobucket.com/albums/v683/Jaycoop/CIMG0960.jpg](http://img.photobucket.com/albums/v683/Jaycoop/CIMG0960.jpg) ---
**Author:** ![tegSimple](https://avatars.discourse-cdn.com/v4/letter/t/d6d6ee/32.png) [@tegSimple](https://forums.speedlife.net/u/tegSimple)\ **Post date:** [June 19, 2007, 5:50am UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/7 "2007-06-19T05:50:31Z")
^^^ B E A UTIFUL weld!! ^^^ Yeh…shop hours don’t really apply to Jeff even though he would like you to think otherwise. I’ve been there working on my car at like 11:30pm and I’m sure there have been others there working much later. ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [June 19, 2007, 5:52am UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/8 "2007-06-19T05:52:32Z")
> [@Gauge/ Radio panel I made for an Integra](https://forums.speedlife.net/t/gauge-radio-panel-i-made-for-an-integra/30784/5): > > Yeh…shop hours don’t really apply to Jeff even though he would like you to think otherwise. I’ve been there working on my car at like 11:30pm and I’m sure there have been others there working much later. x2, 3-4 am sounds about rite lol ---
**Author:** ![rich5150](https://avatars.discourse-cdn.com/v4/letter/r/ce7236/32.png) [@rich5150](https://forums.speedlife.net/u/rich5150)\ **Post date:** [June 19, 2007, 7:44am UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/9 "2007-06-19T07:44:45Z")
> [@TO: Fat guy with green teeth at S&R Cruise Night](https://forums.speedlife.net/t/to-fat-guy-with-green-teeth-at-s-r-cruise-night/30842/10): > > yep i can take care of it if needed as well as any other shop listed is capable to to do it also Jeff, I called and left you a voicemail. Let me know when you have some time to take care of this, the exhaust leak is driving me nuts. ---
**Author:** ![Lazylaser](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lazylaser/32/6033_2.png) [@Lazylaser](https://forums.speedlife.net/u/Lazylaser)\ **Post date:** [November 29, 2007, 8:27am UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/10 "2007-11-29T08:27:30Z")
Runnning into the same problem, Dlk can weld in my o2 bung in the stainless downpipe, but its got to be off the car. ---
**Author:** ![Lazylaser](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lazylaser/32/6033_2.png) [@Lazylaser](https://forums.speedlife.net/u/Lazylaser)\ **Post date:** [November 29, 2007, 8:39am UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/11 "2007-11-29T08:39:39Z")
I’ll be calling the above listed shops, trying to set something up for today or tommrow ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [November 29, 2007, 10:51am UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/12 "2007-11-29T10:51:38Z")
i have O2 bungs here if you need one. and can weld it for you whenever ---
**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\ **Post date:** [November 29, 2007, 3:09pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/13 "2007-11-29T15:09:08Z")
> [@Why has my weight loss all but stopped?](https://forums.speedlife.net/t/why-has-my-weight-loss-all-but-stopped/33614/39): > > i have O2 bungs here if you need one. and can weld it for you whenever find the hookup on Stainless ones yet?? ---
**Author:** ![Lazylaser](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lazylaser/32/6033_2.png) [@Lazylaser](https://forums.speedlife.net/u/Lazylaser)\ **Post date:** [November 29, 2007, 3:17pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/14 "2007-11-29T15:17:40Z")
> [@NY laws - no hood?](https://forums.speedlife.net/t/ny-laws-no-hood/33642/13): > > find the hookup on Stainless ones yet?? were you asking Me or Jeff? ---
**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\ **Post date:** [November 29, 2007, 3:32pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/15 "2007-11-29T15:32:03Z")
jeff ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [November 29, 2007, 4:26pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/16 "2007-11-29T16:26:03Z")
i can get the stainless ones but it is stupid money for them. i typically do not stock them. ---
**Author:** ![yamaha](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yamaha/32/5929_2.png) [@yamaha](https://forums.speedlife.net/u/yamaha)\ **Post date:** [November 30, 2007, 7:25pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/17 "2007-11-30T19:25:13Z")
Jeffry from 1st-Try FTW. That jew may not be able to hear but he sure can weld up a storm. ---
**Author:** ![Lazylaser](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lazylaser/32/6033_2.png) [@Lazylaser](https://forums.speedlife.net/u/Lazylaser)\ **Post date:** [November 30, 2007, 8:14pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/18 "2007-11-30T20:14:53Z")
thanks jeff ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [November 30, 2007, 11:21pm UTC](https://forums.speedlife.net/t/who-does-tig-stainless-steel-welding/190620/19 "2007-11-30T23:21:28Z")
NP let me know if you ever need anything