# who has access to a mill ? need some aluminium parts modified

**URL:** <https://forums.speedlife.net/t/who-has-access-to-a-mill-need-some-aluminium-parts-modified/45572>\
**Category:** NYSpeed Off Topic\
**Created:** [March 24, 2008, 5:56pm UTC](https://forums.speedlife.net/t/who-has-access-to-a-mill-need-some-aluminium-parts-modified/45572 "2008-03-24T17:56:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\
**Post date:** [March 24, 2008, 5:56pm UTC](https://forums.speedlife.net/t/who-has-access-to-a-mill-need-some-aluminium-parts-modified/45572/1 "2008-03-24T17:56:23Z")

</div>

simple deal here, i need some aluminium housings opened up from 38mm to 2 inches (or slight interference fit on a 1.997 insert)

4 holes need to be done, 3 shown here, and one more of the single port sections of a matching unit

inserts will be welded on the top and epoxied across the bottom, so perfection isnt required

pics of the parts:

---

<div class="post-metadata">

**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\
**Post date:** [March 26, 2008, 1:37pm UTC](https://forums.speedlife.net/t/who-has-access-to-a-mill-need-some-aluminium-parts-modified/45572/2 "2008-03-26T13:37:42Z")

</div>

bump

---

<div class="post-metadata">

**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\
**Post date:** [March 26, 2008, 1:56pm UTC](https://forums.speedlife.net/t/who-has-access-to-a-mill-need-some-aluminium-parts-modified/45572/3 "2008-03-26T13:56:17Z")

</div>

newman, awddrifter?