# Who is running MR coilovers??? (problem??) **URL:** \ **Category:** SON240sx Automotive\ **Created:** [April 3, 2006, 10:56pm UTC](https://forums.speedlife.net/t/who-is-running-mr-coilovers-problem/94542 "2006-04-03T22:56:44Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Fitzy](https://avatars.discourse-cdn.com/v4/letter/f/7ba0ec/32.png) [@Fitzy](https://forums.speedlife.net/u/Fitzy)\ **Post date:** [April 3, 2006, 10:56pm UTC](https://forums.speedlife.net/t/who-is-running-mr-coilovers-problem/94542/1 "2006-04-03T22:56:44Z")
So i purchased a set of used Megan Racing Coilovers from a user on this board and i installed them on my S13, i adjusted them all the way to the top (i heard rumor this was 1" above stock?? :? ) anyways it’s no where close to that, it’s still lowered over 2"… anyone have a rough idea what i’m doing wrong??? Fitzy ---
**Author:** ![Fitzy](https://avatars.discourse-cdn.com/v4/letter/f/7ba0ec/32.png) [@Fitzy](https://forums.speedlife.net/u/Fitzy)\ **Post date:** [April 4, 2006, 6:15am UTC](https://forums.speedlife.net/t/who-is-running-mr-coilovers-problem/94542/2 "2006-04-04T06:15:37Z")
this might help, this is with the rear all the way to the top…i might keep it this low but i would like the ability to go higher if i needed too. also the wheels are 14’s on it wiht 185/70 tires. ![http://i16.photobucket.com/albums/b15/Jeffitzpatrick/HPIM0036.jpg](http://i16.photobucket.com/albums/b15/Jeffitzpatrick/HPIM0036.jpg) any ideas?? Fitzy ---
**Author:** ![Alex](https://avatars.discourse-cdn.com/v4/letter/a/db5fbb/32.png) [@Alex](https://forums.speedlife.net/u/Alex)\ **Post date:** [April 4, 2006, 3:24pm UTC](https://forums.speedlife.net/t/who-is-running-mr-coilovers-problem/94542/3 "2006-04-04T15:24:20Z")
i dont see how that can be all the way to the top but anyhow, you can adjust height 2 different ways. the spring perch, which i assume is what you mean, and by spinning the shock, so check that and see how its adjusted, ---
**Author:** ![newbieracer](https://avatars.discourse-cdn.com/v4/letter/n/e47c2d/32.png) [@newbieracer](https://forums.speedlife.net/u/newbieracer)\ **Post date:** [April 4, 2006, 4:00pm UTC](https://forums.speedlife.net/t/who-is-running-mr-coilovers-problem/94542/4 "2006-04-04T16:00:44Z")
fitzy did u mold your rear lip and skirts in, and yeah spin the shock down, that will raise it. ---
**Author:** ![slipperysilvia](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slipperysilvia/32/5485_2.png) [@slipperysilvia](https://forums.speedlife.net/u/slipperysilvia)\ **Post date:** [April 4, 2006, 4:37pm UTC](https://forums.speedlife.net/t/who-is-running-mr-coilovers-problem/94542/5 "2006-04-04T16:37:18Z")
spin the shock, make sure u got the preload in at the correct setting that suits ure needs. ---
**Author:** ![RD\_Man](https://avatars.discourse-cdn.com/v4/letter/r/a88e4f/32.png) [@RD\_Man](https://forums.speedlife.net/u/RD_Man)\ **Post date:** [April 4, 2006, 9:40pm UTC](https://forums.speedlife.net/t/who-is-running-mr-coilovers-problem/94542/6 "2006-04-04T21:40:24Z")
> [@newbieracer](#): > > fitzy did u mold your rear lip and skirts in, and yeah spin the shock down, that will raise it. doesnt look molded in ---
**Author:** ![Fitzy](https://avatars.discourse-cdn.com/v4/letter/f/7ba0ec/32.png) [@Fitzy](https://forums.speedlife.net/u/Fitzy)\ **Post date:** [April 4, 2006, 10:05pm UTC](https://forums.speedlife.net/t/who-is-running-mr-coilovers-problem/94542/7 "2006-04-04T22:05:46Z")
Due to me purchasing a cheap body kit, any horizontal lines on the car are molded to hold it on. twisting the strut? sounds like something i’d never think of, out of the three pearches i have the bottom on locked on the bottom of the adjusting range, so should i grab it belown the adjusting range and turn in counterclockwise?? Thanks for the help guys! keep it comming 🙂 Fitzy