# Wide Body **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [February 28, 2006, 3:03pm UTC](https://forums.speedlife.net/t/wide-body/141649 "2006-02-28T15:03:41Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![SRS\_3](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@SRS\_3](https://forums.speedlife.net/u/SRS_3)\ **Post date:** [February 28, 2006, 3:03pm UTC](https://forums.speedlife.net/t/wide-body/141649/1 "2006-02-28T15:03:41Z")
has any one done 30mm or 50mm wide body rear fenders? can you help me find some info on how its done? 🙂 ---
**Author:** ![Speed\_Dreams](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@Speed\_Dreams](https://forums.speedlife.net/u/Speed_Dreams)\ **Post date:** [February 28, 2006, 3:09pm UTC](https://forums.speedlife.net/t/wide-body/141649/2 "2006-02-28T15:09:13Z")
from what i know they are just bolt on :butthead: i have seen soem uninished ones and they don’t look good ---
**Author:** ![SRS\_3](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@SRS\_3](https://forums.speedlife.net/u/SRS_3)\ **Post date:** [February 28, 2006, 3:16pm UTC](https://forums.speedlife.net/t/wide-body/141649/3 "2006-02-28T15:16:44Z")
im talkin like the full rear quarter… not the flairs. im wonder wha they look like (any body have any pics) and do they go directly over the stock fender or do i need to cut. ---
**Author:** ![TyPhOOn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/typhoon/32/5800_2.png) [@TyPhOOn](https://forums.speedlife.net/u/TyPhOOn)\ **Post date:** [February 28, 2006, 3:49pm UTC](https://forums.speedlife.net/t/wide-body/141649/4 "2006-02-28T15:49:15Z")
it depends how big of wheels you are planning to fit in there …sometimes you will have to cut or modify the rear fenders to fit a larger wheel. ![http://members.shaw.ca/sil_eighty/sale3.jpg](http://members.shaw.ca/sil_eighty/sale3.jpg) ---
**Author:** ![canadianskyline](https://avatars.discourse-cdn.com/v4/letter/c/41988e/32.png) [@canadianskyline](https://forums.speedlife.net/u/canadianskyline)\ **Post date:** [February 28, 2006, 3:49pm UTC](https://forums.speedlife.net/t/wide-body/141649/5 "2006-02-28T15:49:30Z")
Just get some chicken wire, fibreglass resin, and bondo. Thats how cool people do it. 🙂 ---
**Author:** ![SRS\_3](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@SRS\_3](https://forums.speedlife.net/u/SRS_3)\ **Post date:** [February 28, 2006, 3:53pm UTC](https://forums.speedlife.net/t/wide-body/141649/6 "2006-02-28T15:53:29Z")
nah im no that cool 8) .i plan on gettin some thick wheels… just wanted to get an idea of the wha it takes to put em on. ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [February 28, 2006, 5:25pm UTC](https://forums.speedlife.net/t/wide-body/141649/7 "2006-02-28T17:25:25Z")
??? I am fitting 9’s and 10’s under a stock body with just pulling the fenders Unless you are going to 12’s or higher or you want a show car there is no point to a widebody. Or rust repair :lol: ---
**Author:** ![TyPhOOn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/typhoon/32/5800_2.png) [@TyPhOOn](https://forums.speedlife.net/u/TyPhOOn)\ **Post date:** [February 28, 2006, 8:34pm UTC](https://forums.speedlife.net/t/wide-body/141649/8 "2006-02-28T20:34:43Z")
there is 9 and 10 inch rims with low enough offset to require widebody those wheels in the picture are 18x10 +22 offset with a 10mm spacer there is some 18x10 -10 offset wheels on there now that come out even further without a spacer … ---
**Author:** ![SRS\_3](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@SRS\_3](https://forums.speedlife.net/u/SRS_3)\ **Post date:** [February 28, 2006, 9:01pm UTC](https://forums.speedlife.net/t/wide-body/141649/9 "2006-02-28T21:01:35Z")
well im lookin to go wide just not super rediculously wide!