# wierd question... about abs brakes

**URL:** <https://forums.speedlife.net/t/wierd-question-about-abs-brakes/152640>\
**Category:** SON240sx Automotive\
**Created:** [April 2, 2010, 11:21am UTC](https://forums.speedlife.net/t/wierd-question-about-abs-brakes/152640 "2010-04-02T11:21:27Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![corpse](https://avatars.discourse-cdn.com/v4/letter/c/ed655f/32.png) [@corpse](https://forums.speedlife.net/u/corpse)\
**Post date:** [April 2, 2010, 11:21am UTC](https://forums.speedlife.net/t/wierd-question-about-abs-brakes/152640/1 "2010-04-02T11:21:27Z")

</div>

ok, if you put an originally abs equiped brake system (s14 front spindle,caliper,rotor) on a non abs equiped car (s13) with the abs line unattached will it effect anything negatively?

do i remove the sensor? just plug the line? just cut the line? are the brake pads for abs or non abs the same size?

---

<div class="post-metadata">

**Author:** ![m\_wolfenden](https://avatars.discourse-cdn.com/v4/letter/m/ce73a5/32.png) [@m\_wolfenden](https://forums.speedlife.net/u/m_wolfenden)\
**Post date:** [April 2, 2010, 3:18pm UTC](https://forums.speedlife.net/t/wierd-question-about-abs-brakes/152640/2 "2010-04-02T15:18:15Z")

</div>

ive done this…i just didnt have the abs hooked up didnt seem ot cause any problems for me…and i do believe the pads are different but im not 100% on that

---

<div class="post-metadata">

**Author:** ![S13GG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13gg/32/5506_2.png) [@S13GG](https://forums.speedlife.net/u/S13GG)\
**Post date:** [April 4, 2010, 5:04am UTC](https://forums.speedlife.net/t/wierd-question-about-abs-brakes/152640/3 "2010-04-04T05:04:59Z")

</div>

just ziptie the extra line out of the way…

or remove it and make a plate to cover the hole it leaves, as this will allow shit to get in behind the hub in the general area of the wheel bearing.

---

<div class="post-metadata">

**Author:** ![corpse](https://avatars.discourse-cdn.com/v4/letter/c/ed655f/32.png) [@corpse](https://forums.speedlife.net/u/corpse)\
**Post date:** [April 5, 2010, 4:50pm UTC](https://forums.speedlife.net/t/wierd-question-about-abs-brakes/152640/4 "2010-04-05T16:50:09Z")

</div>

what about brake pad size???

---

<div class="post-metadata">

**Author:** ![Specialedition](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/specialedition/32/5714_2.png) [@Specialedition](https://forums.speedlife.net/u/Specialedition)\
**Post date:** [April 5, 2010, 6:07pm UTC](https://forums.speedlife.net/t/wierd-question-about-abs-brakes/152640/5 "2010-04-05T18:07:33Z")

</div>

Abs pads are different from none abs pads