# winter 07/08 project is done!
**URL:** https://forums.speedlife.net/t/winter-07-08-project-is-done/43039
**Category:** NYSpeed Automotive
**Created:** [February 6, 2008, 6:10pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039 "2008-02-06T18:10:31Z")
**Posts on this page:** 20
**Page:** 4
### Author:  [@sureshot](https://forums.speedlife.net/u/sureshot)
#### Post date: [February 7, 2008, 11:22am UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/61 "2008-02-07T11:22:23Z")
I think your next mod should be a nice big C-West mouth to show off the new IC 🙂
---
### Author:  [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)
#### Post date: [February 7, 2008, 11:22am UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/62 "2008-02-07T11:22:43Z")
> [@psphinx81](#):
>
> .82
The fp housing is more like a .68 a/r IIRC. The fp housing comes standard for the smaller exhaust wheel of the 3052 and 3065 and is machined to fit the normal 3582 exhaust wheel. Also you said you had the same setup as dave b. but he was on a t3 82a/r and custom header. Now he’s on another custom header and tial 82a/r. Not to put you down but the fp housing and that cast manifold will never make the same power as a larger housing and custom header.
I hope you don’t take this the wrong way, I’m just stating facts.
The cast manifold will probably hold up better/longer though.
---
### Author:  [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [February 7, 2008, 11:23am UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/63 "2008-02-07T11:23:08Z")
> [@psphinx81](#):
>
> never.
fail.
EDIT: psphail81
---
### Author:  [@psphinx81](https://forums.speedlife.net/u/psphinx81)
#### Post date: [February 7, 2008, 11:25am UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/64 "2008-02-07T11:25:21Z")
then pay for it and ill do it.
---
### Author:  [@Oroc](https://forums.speedlife.net/u/Oroc)
#### Post date: [February 7, 2008, 12:04pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/65 "2008-02-07T12:04:43Z")
> [@sureshot!](#):
>
> SPRAY TO SPOOL
> 2.4
> DONT BE A FAG ITS EASY
> :rx3:
> my little evo nooblet 😉
Thankyou! i like the way this guy thinks! psphail81 whipe off ur vag and do something cool! LOL And dont lie again! You loved spraying!
psphailiar81
I like yellow skittles. \<3
---
### Author:  [@cky89](https://forums.speedlife.net/u/cky89)
#### Post date: [February 7, 2008, 12:30pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/66 "2008-02-07T12:30:18Z")
lol poor Paul getting torn apart over his build.
I’d also like to see the wheels :tup:
---
### Author:  [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [February 7, 2008, 12:41pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/67 "2008-02-07T12:41:31Z")
psphail81
motion for custom title
---
### Author:  [@sureshot](https://forums.speedlife.net/u/sureshot)
#### Post date: [February 7, 2008, 12:52pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/68 "2008-02-07T12:52:11Z")
> [@newman](#):
>
> psphail81
>
> motion for custom title
+1
---
### Author:  [@psphinx81](https://forums.speedlife.net/u/psphinx81)
#### Post date: [February 7, 2008, 1:17pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/69 "2008-02-07T13:17:00Z")
:blah: :blah: :blah:
mike can sure show himself online, otherwise no.
and running the spray i DID not enjoy it, u know it fag. having timing pulled out when i wasnt spraying sucked ass. i rarely sprayed it
---
### Author:  [@sureshot](https://forums.speedlife.net/u/sureshot)
#### Post date: [February 7, 2008, 1:25pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/70 "2008-02-07T13:25:19Z")
> [@psphinx81](#):
>
> :blah: :blah: :blah:
>
> mike can sure show himself online, otherwise no.
>
> and running the spray i DID not enjoy it, u know it fag. having timing pulled out when i wasnt spraying sucked ass. i rarely sprayed it
hehe
shoulda built a cockpit timing adjustment tool 🙂
EMS = 3 maps, get the jets and the electronics, and the 42r!!!
---
### Author:  [@psphinx81](https://forums.speedlife.net/u/psphinx81)
#### Post date: [February 7, 2008, 1:27pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/71 "2008-02-07T13:27:17Z")
i was def not spending 15k over winter thats for sure. EMS is a PITA alone when it comes to inspection time
---
### Author:  [@sureshot](https://forums.speedlife.net/u/sureshot)
#### Post date: [February 7, 2008, 1:29pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/72 "2008-02-07T13:29:32Z")
> [@psphinx81](#):
>
> i was def not spending 15k over winter thats for sure. EMS is a PITA alone when it comes to inspection time
i have a feeling you are sitting on edge right now… relax all is good
everyone is happy to have another gt35r’d car on the forum 🙂
---
### Author:  [@Dr.Stevil](https://forums.speedlife.net/u/Dr.Stevil)
#### Post date: [February 7, 2008, 1:30pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/73 "2008-02-07T13:30:48Z")
very nice :tup: 🍺 what kind of #'s are you expecting to put down?
---
### Author:  [@psphinx81](https://forums.speedlife.net/u/psphinx81)
#### Post date: [February 7, 2008, 1:31pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/74 "2008-02-07T13:31:49Z")
people that dont know what works need to gtfo, because it obviously shows.
as far as EMS goes, yes i will go to it. probably later this summer, but i might wait till after my inspection time before i actually do. putting all the emissions crap back on and putting the stock ecu in everytime is going to suck. i just hope i dont throw any codes and it runs when i do
---
### Author:  [@psphinx81](https://forums.speedlife.net/u/psphinx81)
#### Post date: [February 7, 2008, 1:33pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/75 "2008-02-07T13:33:07Z")
> [@Dr.Stevil](#):
>
> very nice :tup: 🍺 what kind of #'s are you expecting to put down?
on the 100 oct. i have no clue, but with the 112 tune it will def be over 500.
---
### Author:  [@Dr.Stevil](https://forums.speedlife.net/u/Dr.Stevil)
#### Post date: [February 7, 2008, 1:35pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/76 "2008-02-07T13:35:49Z")
holy shit, that’ll be a fun ass car to scoot around in :tup:
be careful and enjoy it 🍺
---
### Author:  [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)
#### Post date: [February 7, 2008, 1:49pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/77 "2008-02-07T13:49:07Z")
I love it when a plan comes together 😃
---
### Author:  [@Oroc](https://forums.speedlife.net/u/Oroc)
#### Post date: [February 7, 2008, 1:53pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/78 "2008-02-07T13:53:05Z")
> [@psphinx81](#):
>
> people that dont know what works need to gtfo,
lol ok i’m leaving…
---
### Author:  [@speedster](https://forums.speedlife.net/u/speedster)
#### Post date: [February 7, 2008, 6:57pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/79 "2008-02-07T18:57:06Z")
ok again…wheels? where are the wheels??
---
### Author:  [@psphinx81](https://forums.speedlife.net/u/psphinx81)
#### Post date: [February 7, 2008, 7:03pm UTC](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039/80 "2008-02-07T19:03:48Z")
just finished uploading them :lol:
good timing
here is a crappy video of the car running:
[](http://smg.photobucket.com/albums/v259/psphinx81/?action=view¤t=DSCN1413.flv)
and a pic:
[Previous page](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039.md?page=3)
[Next page](https://forums.speedlife.net/t/winter-07-08-project-is-done/43039.md?page=5)