# wiper linkage

**URL:** <https://forums.speedlife.net/t/wiper-linkage/207090>\
**Category:** Classifieds\
**Created:** [December 11, 2010, 1:30pm UTC](https://forums.speedlife.net/t/wiper-linkage/207090 "2010-12-11T13:30:43Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lummer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lummer/32/5493_2.png) [@Lummer](https://forums.speedlife.net/u/Lummer)\
**Post date:** [December 11, 2010, 1:30pm UTC](https://forums.speedlife.net/t/wiper-linkage/207090/1 "2010-12-11T13:30:43Z")

</div>

looking for wiper linkage for an S13

in brampton, prefer something local

416-795-5491

thanks

Kyle

---

<div class="post-metadata">

**Author:** ![DirrtyDevo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dirrtydevo/32/5547_2.png) [@DirrtyDevo](https://forums.speedlife.net/u/DirrtyDevo)\
**Post date:** [December 12, 2010, 5:57pm UTC](https://forums.speedlife.net/t/wiper-linkage/207090/2 "2010-12-12T17:57:12Z")

</div>

If the linkage is popping off take the cowling off and grease up the ball and put the linkage back on and heat it with a torch near the point of melting then dump some cold water onto it.

It’ll reform tight to the ball and be “mint”

---

<div class="post-metadata">

**Author:** ![Lummer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lummer/32/5493_2.png) [@Lummer](https://forums.speedlife.net/u/Lummer)\
**Post date:** [December 12, 2010, 6:05pm UTC](https://forums.speedlife.net/t/wiper-linkage/207090/3 "2010-12-12T18:05:15Z")

</div>

Kinda jumped the gun on this part. Picked up a car for a winter beater. The linkage is actually good just rotted underneath. Gunna tear apart and weld it up and see how it goes. May not need any parts. Sorry guys