# Wire Harness

**URL:** <https://forums.speedlife.net/t/wire-harness/80425>\
**Category:** SON240sx Automotive\
**Created:** [January 5, 2004, 1:17pm UTC](https://forums.speedlife.net/t/wire-harness/80425 "2004-01-05T13:17:05Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![420sx](https://avatars.discourse-cdn.com/v4/letter/4/e274bd/32.png) [@420sx](https://forums.speedlife.net/u/420sx)\
**Post date:** [January 5, 2004, 1:17pm UTC](https://forums.speedlife.net/t/wire-harness/80425/1 "2004-01-05T13:17:05Z")

</div>

I got my SR today and the wire harness was suppose to be uncut,but I see two spots that have been cut. One is after the fuse box and the other is on one side of the ecu (its after the white plug). Is the harness still good? I have pics of the harness. Thanks

---

<div class="post-metadata">

**Author:** ![MRWmotorsports](https://avatars.discourse-cdn.com/v4/letter/m/f14d63/32.png) [@MRWmotorsports](https://forums.speedlife.net/u/MRWmotorsports)\
**Post date:** [January 5, 2004, 1:24pm UTC](https://forums.speedlife.net/t/wire-harness/80425/2 "2004-01-05T13:24:38Z")

</div>

Well without seeing the pictures it’s hard to tell, but from what you said it sounds OK. If there is a plug, and the wires are cut after teh plug, then that’s good. If you just have cut wires, with no plug then that’s bad.

-Martin.

---

<div class="post-metadata">

**Author:** ![420sx](https://avatars.discourse-cdn.com/v4/letter/4/e274bd/32.png) [@420sx](https://forums.speedlife.net/u/420sx)\
**Post date:** [January 5, 2004, 2:50pm UTC](https://forums.speedlife.net/t/wire-harness/80425/3 "2004-01-05T14:50:42Z")

</div>

its good, the guys at heavy thottle told me. Thanks anyway

---

<div class="post-metadata">

**Author:** ![Racer\_XTREME](https://avatars.discourse-cdn.com/v4/letter/r/e47c2d/32.png) [@Racer\_XTREME](https://forums.speedlife.net/u/Racer_XTREME)\
**Post date:** [January 5, 2004, 5:05pm UTC](https://forums.speedlife.net/t/wire-harness/80425/4 "2004-01-05T17:05:07Z")

</div>

you have to cut those wires, you got a perfect harness (assuming all works) i used the lower harness (after the fuse box) off the KA, because my SR’s was pretty choppy, it was pretty easy, you should think about doing that.