# Woodshop Tools/equipment

**URL:** <https://forums.speedlife.net/t/woodshop-tools-equipment/271956>\
**Category:** Classifieds\
**Created:** [March 24, 2015, 8:40am UTC](https://forums.speedlife.net/t/woodshop-tools-equipment/271956 "2015-03-24T08:40:33Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![superfan99](https://avatars.discourse-cdn.com/v4/letter/s/96bed5/32.png) [@superfan99](https://forums.speedlife.net/u/superfan99)\
**Post date:** [March 27, 2015, 12:29pm UTC](https://forums.speedlife.net/t/woodshop-tools-equipment/271956/21 "2015-03-27T12:29:08Z")

</div>

> [@BOBBYGRV](#):
>
> Thanks for the tip, I have actually been looking at that setup. I plan to run pipe to all my different stations and I tried to buy a bigger vac so that it could be powered across the room with the other ducts closed. Since I’m doing this in my basement, I know dust is a big deal. I don’t have forced air, so I’m lucky there, but I def want to contain the dust.

I’ll likely expand to a larger dust collection system in the next year or so, I don’t think the shop vac will be able to provide nearly the required CFM for some of my larger tools(or at least the tools that create larger chips). They make a larger unit made of steel that you can mount to a larger drum with 4 inch ports.

I also recently made a shop air filter with an 800CFM duct fan. It’s basically a box with cleanable furnace filters on the face of it. It does a great job of pulling dust out of the air when sanding, and was a lot cheaper than the commercially available units. Only cost about $120 in parts, and a couple of hours to build. Similar commercial units were 2-3x’s the price. It’s made a huge difference when finish sanding. way less cleanup (I have a lot of tools on pegboard near my sanding area)

This is where I got the idea: [https://www.youtube.com/watch?v=kP8EYZvgjd0](https://www.youtube.com/watch?v=kP8EYZvgjd0)

---

<div class="post-metadata">

**Author:** ![95dime](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/95dime/32/7514_2.png) [@95dime](https://forums.speedlife.net/u/95dime)\
**Post date:** [March 30, 2015, 1:42pm UTC](https://forums.speedlife.net/t/woodshop-tools-equipment/271956/22 "2015-03-30T13:42:44Z")

</div>

> [@1QIKZ](#):
>
> Remember my smashingly successful tool sale? Still have it all.

what is this tool sale you speak of?

---

<div class="post-metadata">

**Author:** ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)\
**Post date:** [March 30, 2015, 5:51pm UTC](https://forums.speedlife.net/t/woodshop-tools-equipment/271956/23 "2015-03-30T17:51:48Z")

</div>

Do a search. There’s a thread on it here in the classy’s.

---

<div class="post-metadata">

**Author:** ![95dime](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/95dime/32/7514_2.png) [@95dime](https://forums.speedlife.net/u/95dime)\
**Post date:** [March 31, 2015, 9:46am UTC](https://forums.speedlife.net/t/woodshop-tools-equipment/271956/24 "2015-03-31T09:46:14Z")

</div>

> [@1QIKZ](#):
>
> Do a search. There’s a thread on it here in the classy’s.

yep. I found nothing.

---

<div class="post-metadata">

**Author:** ![BadnewsMike](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/badnewsmike/32/7419_2.png) [@BadnewsMike](https://forums.speedlife.net/u/BadnewsMike)\
**Post date:** [March 31, 2015, 3:18pm UTC](https://forums.speedlife.net/t/woodshop-tools-equipment/271956/25 "2015-03-31T15:18:53Z")

</div>

[http://www.nyspeed.com/showthread.php?279742-Gone-out-of-business-garage-sale/page2](http://www.nyspeed.com/showthread.php?279742-Gone-out-of-business-garage-sale/page2)

Suck at the internet, you do.

[Previous page](https://forums.speedlife.net/t/woodshop-tools-equipment/271956.md?page=1)