# Worlds First ::: 4 & 5 lug, hub centric, balanced wheel spacers
**URL:** https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450
**Category:** Bings.ca
**Created:** [September 13, 2008, 8:21pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450 "2008-09-13T20:21:40Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [September 13, 2008, 8:21pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/1 "2008-09-13T20:21:40Z")
These wheel spacers are direct fit for almost all Nissan vehicles and a whole host of other ones too.
only available in 10mm at present.
4 x 114.3 AND 5 x 114.3
Bings logo’s are engraved and balance the spacer perfectly
Spacers are hub centric, i have been running them on the rear of my car for a while now.
Professionally CNC machined in Canada from Canadian materials, aerospace grade anodization.
perfect for guys that are 4 lug now but will be upgrading, perfect for 5 lug guys too.
can transfer between cars if you have a multi-car fleet with different bolt patterns, (Theo?) and will have a strong resale value since they will fit all 240sx’s and tons of other cars too.
$70 shipped per pair.
.jpg)
---
### Author:  [@ls6s13](https://forums.speedlife.net/u/ls6s13)
#### Post date: [September 13, 2008, 8:38pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/2 "2008-09-13T20:38:00Z")
Damn Hot Bing. When you planing on making bigger sizes??? id be interested
---
### Author:  [@Pants](https://forums.speedlife.net/u/Pants)
#### Post date: [September 13, 2008, 8:43pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/3 "2008-09-13T20:43:59Z")
i need 30mm
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [September 13, 2008, 8:50pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/4 "2008-09-13T20:50:56Z")
stack em…
---
### Author:  [@jammin1911](https://forums.speedlife.net/u/jammin1911)
#### Post date: [September 14, 2008, 3:39pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/5 "2008-09-14T15:39:59Z")
^^ ROFL
---
### Author:  [@Lith](https://forums.speedlife.net/u/Lith)
#### Post date: [September 22, 2008, 11:51am UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/6 "2008-09-22T11:51:23Z")
Bing,
if you decide to make 15mm or bigger spacers, would it be possible to have built-in studs as well?
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [September 22, 2008, 1:17pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/7 "2008-09-22T13:17:16Z")
i do not trust ANY studs other than ARP and while i dont have a problem switching to 12 x 1.5 i know some people are gay about it.
i can have anything made, but the costs get up there. for me to reproduce the Bings adapters that i had made for myself i would have to sell them for more than $300.
i cant compete with cheapo china spacers/adapters at $125 or something… mind you i wouldnt use the studs. ARP studs are going to be $100 or so anyways for 10.
---
### Author:  [@sil8t](https://forums.speedlife.net/u/sil8t)
#### Post date: [September 22, 2008, 1:25pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/8 "2008-09-22T13:25:50Z")
i pickd up my 1.5" spacers for 110 u cant beat that with a stick
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [September 22, 2008, 2:40pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/9 "2008-09-22T14:40:54Z")
exactly…
---
### Author:  [@Ian\_mc212](https://forums.speedlife.net/u/Ian_mc212)
#### Post date: [September 25, 2008, 8:40am UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/10 "2008-09-25T08:40:55Z")
Almost all Nissans eh. Skylines as well?
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [September 25, 2008, 9:04am UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/11 "2008-09-25T09:04:19Z")
yeah they will work on a skyline.
---
### Author:  [@KoukiS14](https://forums.speedlife.net/u/KoukiS14)
#### Post date: [October 15, 2008, 1:54pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/12 "2008-10-15T13:54:07Z")
Bingers with the 10mm spacer does the center of the hub still stick out? Meaning can I get a hubcentric ring on it?
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [October 15, 2008, 1:57pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/13 "2008-10-15T13:57:20Z")
a little bit, enough to stick a ring on yeah. the hub lip is a bit more than 10mm.
i thought you were all about the lug-centricity stuff Pete?
---
### Author:  [@jammin1911](https://forums.speedlife.net/u/jammin1911)
#### Post date: [October 15, 2008, 2:46pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/14 "2008-10-15T14:46:57Z")
rofl
for those who are worried about “lug-centricity” – the lugs can do a really good job if you torque them in 3 stages (approx 30ft/lb all around, then 60ft/lb then whatever you prefer, ie: 80-95ft/lb for aluminum wheels)
just a little tidbit for y’all 😉
---
### Author:  [@Tarz](https://forums.speedlife.net/u/Tarz)
#### Post date: [January 24, 2009, 10:52am UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/15 "2009-01-24T10:52:43Z")
damb those are nice nice work bing
---
### Author:  [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)
#### Post date: [February 3, 2009, 6:20am UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/16 "2009-02-03T06:20:43Z")
they is very nice. perfect fitment. don’t cheap out on spacers that will slap around and break studs…(seen in at the track before) these things fit nice and tight. def worth the money.
and stop bitching about changing studs. 12x1.5 is a much better thread pitch anyways. fine thread is ghey.
spend the money the first time…do not spend 3x’s the money when your cheap shit breaks.
bings got the goods…all you need to do is buy em.
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [February 3, 2009, 8:05am UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/17 "2009-02-03T08:05:04Z")
Yeah at first I think some people we weirded out by $70 for a pair of plate spacers, but having dealt with cheap spacers I know that having a perfect fitting set of quality spacers in your tool box is very important when you own multiple sets of wheels and tires.
These have been selling very well and I actually have to do another run of them shortly.
---
### Author:  [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)
#### Post date: [February 6, 2009, 2:50pm UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/18 "2009-02-06T14:50:21Z")
They worked wicked to re-drill the 300 rotors to 4 bolt too!!!
---
### Author:  [@Ca18det](https://forums.speedlife.net/u/Ca18det)
#### Post date: [March 13, 2009, 2:40am UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/19 "2009-03-13T02:40:25Z")
> [@FS: 18'' Konig tuner2's w/ Kumho tires](https://forums.speedlife.net/t/fs-18-konig-tuner2s-w-kumho-tires/19826/17):
>
> Yeah at first I think some people we weirded out by $70 for a pair of plate spacers, but having dealt with cheap spacers I know that having a perfect fitting set of quality spacers in your tool box is very important when you own multiple sets of wheels and tires.
>
> These have been selling very well and I actually have to do another run of them shortly.
Do i can run those 10mm spacer without Longer stud ?
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [March 13, 2009, 5:11am UTC](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450/20 "2009-03-13T05:11:54Z")
no, you need longer wheel studs
[Next page](https://forums.speedlife.net/t/worlds-first-4-5-lug-hub-centric-balanced-wheel-spacers/118450.md?page=2)