# WTB: 1.75" to 2" I/C Coupler

**URL:** <https://forums.speedlife.net/t/wtb-1-75-to-2-i-c-coupler/98163>\
**Category:** Classifieds\
**Created:** [July 21, 2006, 9:52am UTC](https://forums.speedlife.net/t/wtb-1-75-to-2-i-c-coupler/98163 "2006-07-21T09:52:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![s1495](https://avatars.discourse-cdn.com/v4/letter/s/b2d939/32.png) [@s1495](https://forums.speedlife.net/u/s1495)\
**Post date:** [July 21, 2006, 9:52am UTC](https://forums.speedlife.net/t/wtb-1-75-to-2-i-c-coupler/98163/1 "2006-07-21T09:52:13Z")

</div>

I’m looking for the above - the 1.75" is an odd size (my fmic endtanks are 1.75") not carried by vibrant or other places I’ve checked already.

I’m looking for:

- 90 or 45 degree bend on the 1.75" to a 2" coupler (preferred)
- if not available - 1.75" to 1.75" at 90 or 45 degrees

(2 couplers)

Please PM what you have.

Thanks!

---

<div class="post-metadata">

**Author:** ![BAS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bas/32/5540_2.png) [@BAS](https://forums.speedlife.net/u/BAS)\
**Post date:** [July 21, 2006, 5:29pm UTC](https://forums.speedlife.net/t/wtb-1-75-to-2-i-c-coupler/98163/2 "2006-07-21T17:29:49Z")

</div>

best bet is to get those outlets cut off ( assuming it’s an all alloy IC ) and get some 2" welded on…