# WTB: 4" to 3" exhaust reducer PRONTO

**URL:** <https://forums.speedlife.net/t/wtb-4-to-3-exhaust-reducer-pronto/45459>\
**Category:** Classifieds\
**Created:** [March 22, 2008, 6:30pm UTC](https://forums.speedlife.net/t/wtb-4-to-3-exhaust-reducer-pronto/45459 "2008-03-22T18:30:27Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\
**Post date:** [March 22, 2008, 6:30pm UTC](https://forums.speedlife.net/t/wtb-4-to-3-exhaust-reducer-pronto/45459/1 "2008-03-22T18:30:27Z")

</div>

HAI,

I need a 4 - 3" steel reducer, preferably 16ga QUICK. would like to get one by mid sunday. i don’t know what auto stores have to offer or if they are even open tomorrow, so im just seeing what is available. i would like to complete this portion of my build this weekend.

i dont have a specific reducer length in mind, but it can’t be extremely short or extremely long. however it doesn’t have to be the “best” flowing design possible as it will be connected post cutout for closed exhaust, which will not be used for performance reasons.

ps: not looking to spend a lot of money, by any means. i will wait if it means saving a significant amount of money

tanks

---

<div class="post-metadata">

**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\
**Post date:** [March 22, 2008, 7:32pm UTC](https://forums.speedlife.net/t/wtb-4-to-3-exhaust-reducer-pronto/45459/2 "2008-03-22T19:32:56Z")

</div>

what about making just making it? then you can do what you want, its what I do.

---

<div class="post-metadata">

**Author:** ![dirtye30](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dirtye30/32/7333_2.png) [@dirtye30](https://forums.speedlife.net/u/dirtye30)\
**Post date:** [March 23, 2008, 2:07pm UTC](https://forums.speedlife.net/t/wtb-4-to-3-exhaust-reducer-pronto/45459/3 "2008-03-23T14:07:50Z")

</div>

i think i have one. youd have to pull it off my car tho.

---

<div class="post-metadata">

**Author:** ![E.Roy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/e.roy/32/5073_2.png) [@E.Roy](https://forums.speedlife.net/u/E.Roy)\
**Post date:** [March 23, 2008, 8:06pm UTC](https://forums.speedlife.net/t/wtb-4-to-3-exhaust-reducer-pronto/45459/4 "2008-03-23T20:06:54Z")

</div>

try napa

---

<div class="post-metadata">

**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\
**Post date:** [March 23, 2008, 8:57pm UTC](https://forums.speedlife.net/t/wtb-4-to-3-exhaust-reducer-pronto/45459/5 "2008-03-23T20:57:37Z")

</div>

i kinda just went on to other things. i shouldnt rush it anyway, esp since my new e-cutout didnt get in yet. just want to get this shit out to the coaters after next weekend, but dont want to rush it at the same time

---

<div class="post-metadata">

**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\
**Post date:** [March 23, 2008, 9:21pm UTC](https://forums.speedlife.net/t/wtb-4-to-3-exhaust-reducer-pronto/45459/6 "2008-03-23T21:21:45Z")

</div>

if you want I can see if I can make something tomorrow at the shop… give me a call mid day… pm sent with number.