# WTB: a pre 96 honda project/shell.

**URL:** <https://forums.speedlife.net/t/wtb-a-pre-96-honda-project-shell/42950>\
**Category:** Classifieds\
**Created:** [February 4, 2008, 11:21pm UTC](https://forums.speedlife.net/t/wtb-a-pre-96-honda-project-shell/42950 "2008-02-04T23:21:07Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![laymone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/laymone/32/48908_2.png) [@laymone](https://forums.speedlife.net/u/laymone)\
**Post date:** [February 4, 2008, 11:21pm UTC](https://forums.speedlife.net/t/wtb-a-pre-96-honda-project-shell/42950/1 "2008-02-04T23:21:07Z")

</div>

just like everyone else post, im also looking for a shell to put my motor in.  
-integra da or dc,crx ,ef hatch,eg  
rust is probly my main concern but its wny.  
the cheaper the better.  
manual also, unless its a super deal.  
something around 1500 and less.  
lmk what you guy have or spotted.

---

<div class="post-metadata">

**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\
**Post date:** [February 5, 2008, 6:25am UTC](https://forums.speedlife.net/t/wtb-a-pre-96-honda-project-shell/42950/2 "2008-02-05T06:25:29Z")

</div>

[http://nyspeed.com/forums/showthread.php?t=38735](http://nyspeed.com/forums/showthread.php?t=38735)

ide part out the shell for 1k firm

---

<div class="post-metadata">

**Author:** ![laymone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/laymone/32/48908_2.png) [@laymone](https://forums.speedlife.net/u/laymone)\
**Post date:** [February 5, 2008, 3:13pm UTC](https://forums.speedlife.net/t/wtb-a-pre-96-honda-project-shell/42950/3 "2008-02-05T15:13:15Z")

</div>

how the wheel wells, are they orginal, bondo, cut and welded? where are you located so i can take a good look at it.  
how dose under the sideskirt look and would it need balljoint and junk in the near future.

---

<div class="post-metadata">

**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\
**Post date:** [February 5, 2008, 3:24pm UTC](https://forums.speedlife.net/t/wtb-a-pre-96-honda-project-shell/42950/4 "2008-02-05T15:24:43Z")

</div>

it was cut and weld. Under the sideskirt on the driver side, I replaced the rear section, but its good other then that. The other side just had some surface rust going on. I don’t really know about the balljoints.

Im in amherst, you can come see it whenever.

---

<div class="post-metadata">

**Author:** ![elmisterioso666](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/elmisterioso666/32/5107_2.png) [@elmisterioso666](https://forums.speedlife.net/u/elmisterioso666)\
**Post date:** [February 5, 2008, 9:55pm UTC](https://forums.speedlife.net/t/wtb-a-pre-96-honda-project-shell/42950/5 "2008-02-05T21:55:57Z")

</div>

I have a crx shell

---

<div class="post-metadata">

**Author:** ![laymone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/laymone/32/48908_2.png) [@laymone](https://forums.speedlife.net/u/laymone)\
**Post date:** [February 6, 2008, 12:51am UTC](https://forums.speedlife.net/t/wtb-a-pre-96-honda-project-shell/42950/6 "2008-02-06T00:51:59Z")

</div>

you told me about it. more info and pics please

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [February 7, 2008, 3:38am UTC](https://forums.speedlife.net/t/wtb-a-pre-96-honda-project-shell/42950/7 "2008-02-07T03:38:44Z")

</div>

you should be able to find these easily