# WTB: Audio Parts **URL:** \ **Category:** Classifieds\ **Created:** [May 5, 2009, 6:57am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972 "2009-05-05T06:57:23Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![Ilya](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ilya/32/6404_2.png) [@Ilya](https://forums.speedlife.net/u/Ilya)\ **Post date:** [May 5, 2009, 6:57am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972/1 "2009-05-05T06:57:23Z")
So my system that I built not long ago didn’t come out the way I wanted. Going to give this another go. That audiobahn amp is acting up. Shoulda listened to you guys. Lesson learned. I want to purchase the following after reading a bunch of reviews: - JL Audio 10W1v2-4 10" Sub or similar spec’ed sub - [link](http://www.crutchfield.com/p_13610W1V24/JL-Audio-10W1v2-4.html) - Alpine PDX-5 5-Channel Amp or similar spec’ed amp - [link](http://www.crutchfield.com/p_500PDX5/Alpine-PDX-5.html) - StreetWires ZeroNoise 7 6-Channel RCA Cables (19.7ft) or similar 6-channel quality RCA’s - [link](http://www.crutchfield.com/p_211ZN7660/StreetWires-ZeroNoise-7-Series-6-Channel-Patch-Cables-19-7-feet.html) - Nice SEALED (not ported) box for the 10" sub - [link](http://www.crutchfield.com/p_236BS110S/Bass-Slammer-BS110S.html) One important note. **The box HAS to be wider than the amp. The amp will be mounted onto the box. I don’t want any part of the amp hanging off the box.** The amp/box dimensions I have linked above works for me. Let me know if you have anything. ---
**Author:** ![GermanPSI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/germanpsi/32/6353_2.png) [@GermanPSI](https://forums.speedlife.net/u/GermanPSI)\ **Post date:** [May 5, 2009, 6:58am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972/2 "2009-05-05T06:58:28Z")
I have a really nice box for 2 10’s ---
**Author:** ![Ilya](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ilya/32/6404_2.png) [@Ilya](https://forums.speedlife.net/u/Ilya)\ **Post date:** [May 5, 2009, 6:59am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972/3 "2009-05-05T06:59:55Z")
I only want one. I’m not looking to rattle the eyes out of my head. I just want one nice 300watt or so 10" to fill out the low end of my music. Plus I don’t want to take up too much space. ---
**Author:** ![Ilya](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ilya/32/6404_2.png) [@Ilya](https://forums.speedlife.net/u/Ilya)\ **Post date:** [May 5, 2009, 7:02am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972/4 "2009-05-05T07:02:23Z")
The other option for a box is to have someone build something like this for me: ![http://forums.maxima.org/members/midnight0045-albums-policemax-picture2349-trunk.jpg](http://forums.maxima.org/members/midnight0045-albums-policemax-picture2349-trunk.jpg) Anyone here do that stuff? ---
**Author:** ![justin2386](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin2386/32/6496_2.png) [@justin2386](https://forums.speedlife.net/u/justin2386)\ **Post date:** [May 5, 2009, 7:18am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972/5 "2009-05-05T07:18:50Z")
honestly, ive never done anything like that specifically, but if i had the materials in my hands i could work wonders, i always did well in all my shop classes in HS…i have pics of my work 😉 i also have a sealed single 10" box…idr dimensions off the top of my head… ---
**Author:** ![justin2386](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin2386/32/6496_2.png) [@justin2386](https://forums.speedlife.net/u/justin2386)\ **Post date:** [May 5, 2009, 7:20am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972/6 "2009-05-05T07:20:19Z")
also have a shitload of audio layin around, ill look around and let you know what i got… ---
**Author:** ![Ilya](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ilya/32/6404_2.png) [@Ilya](https://forums.speedlife.net/u/Ilya)\ **Post date:** [May 5, 2009, 7:31am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972/7 "2009-05-05T07:31:08Z")
Well I really want that Alpine amp. It sounds like a very nice unit. The dimension so fit are: 10-3/16"W x 2-1/2"H x 8-3/8"D As for the box…the one I linked above is not expensive, but has gotten some (not that many) bad reviews. I’m not looking to spend too much on a box. How much do you think an entire trunk setup like that would cost? I would just pay you the money to get the materials, etc. if I did go that route. ---
**Author:** ![justin2386](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin2386/32/6496_2.png) [@justin2386](https://forums.speedlife.net/u/justin2386)\ **Post date:** [May 5, 2009, 7:59am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972/8 "2009-05-05T07:59:20Z")
hmmm…i havent been to home depot lately to check out mdf prices…lol, but heres a list of stuff that will probably be needed: mdf silicone the sub itself amp(s)/cap (anything else that will be installed in the panel) i was thinkin a plexiglass window over the amps would look good as well as give them a little protection, as well as carpet to cover the whole thing… id also need to steal the car for measurements/fitments etc… do you use your spare tire well for anything? do you have a tire in there even? lol ---
**Author:** ![Ilya](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ilya/32/6404_2.png) [@Ilya](https://forums.speedlife.net/u/Ilya)\ **Post date:** [May 5, 2009, 8:02am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972/9 "2009-05-05T08:02:12Z")
Yeah I was talking to someone else about such an enclosure and looks like I’d most likely have to delete my spare (which I have and have used). I don’t want to do that. If I don’t do that, we’ll have to raise the floor considerably to fit the sub, etc. Looks like I’ll be sticking to a 10" single sealed box. ---
**Author:** ![justin2386](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin2386/32/6496_2.png) [@justin2386](https://forums.speedlife.net/u/justin2386)\ **Post date:** [May 5, 2009, 8:03am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972/10 "2009-05-05T08:03:20Z")
your you could put the spare on the side of your trunk…lol or up against the back seat 😉 ---
**Author:** ![Ilya](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ilya/32/6404_2.png) [@Ilya](https://forums.speedlife.net/u/Ilya)\ **Post date:** [May 5, 2009, 8:07am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972/11 "2009-05-05T08:07:47Z")
I’m going for the clean look. A nasty ass spare ain’t gonna cut it lol. Let me know if you have anything else that I might be interested in though. ---
**Author:** ![justin2386](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin2386/32/6496_2.png) [@justin2386](https://forums.speedlife.net/u/justin2386)\ **Post date:** [May 5, 2009, 8:24am UTC](https://forums.speedlife.net/t/wtb-audio-parts/243972/12 "2009-05-05T08:24:14Z")
haha yea, i meant have it in thesre w/ a cover over it…give it an old school look 😉