# WTB: banjo bolt, big16g, oil feed

**URL:** <https://forums.speedlife.net/t/wtb-banjo-bolt-big16g-oil-feed/10941>\
**Category:** Classifieds\
**Created:** [April 18, 2006, 8:29am UTC](https://forums.speedlife.net/t/wtb-banjo-bolt-big16g-oil-feed/10941 "2006-04-18T08:29:38Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![carl5463729](https://avatars.discourse-cdn.com/v4/letter/c/ecae2f/32.png) [@carl5463729](https://forums.speedlife.net/u/carl5463729)\
**Post date:** [April 18, 2006, 8:29am UTC](https://forums.speedlife.net/t/wtb-banjo-bolt-big16g-oil-feed/10941/1 "2006-04-18T08:29:38Z")

</div>

i broke mine and i need one asap. it’s the smaller bolt on top of the turbo. if anyone has one sitting around that i can take, i will buy a new one. thanks

---

<div class="post-metadata">

**Author:** ![99\_civic\_si](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/99_civic_si/32/7319_2.png) [@99\_civic\_si](https://forums.speedlife.net/u/99_civic_si)\
**Post date:** [April 19, 2006, 8:37pm UTC](https://forums.speedlife.net/t/wtb-banjo-bolt-big16g-oil-feed/10941/2 "2006-04-19T20:37:00Z")

</div>

the autoparts store next to hectors hardware across from zorbas on transit has a decent selection of banjo bolts. or buy a good bolt from a hardware store and pay $30 to get it machined into a banjo bolt at a machine shop.

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [April 19, 2006, 11:20pm UTC](https://forums.speedlife.net/t/wtb-banjo-bolt-big16g-oil-feed/10941/3 "2006-04-19T23:20:48Z")

</div>

Ferry Hydraulic on Walden Avenue has the bolt with the correct thread pitch and length. The only thing you need to do is drill out the oil holes for proper flow

---

<div class="post-metadata">

**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\
**Post date:** [April 19, 2006, 11:29pm UTC](https://forums.speedlife.net/t/wtb-banjo-bolt-big16g-oil-feed/10941/4 "2006-04-19T23:29:10Z")

</div>

> [@JnJSpdShop](#):
>
> Ferry Hydraulic on Walden Avenue has the bolt with the correct thread pitch and length. The only thing you need to do is drill out the oil holes for proper flow

ferry has the stuff, great guys too