# wtb:bell housing and flywheel bolts 4 sr

**URL:** <https://forums.speedlife.net/t/wtb-bell-housing-and-flywheel-bolts-4-sr/98509>\
**Category:** Classifieds\
**Created:** [August 1, 2006, 7:47am UTC](https://forums.speedlife.net/t/wtb-bell-housing-and-flywheel-bolts-4-sr/98509 "2006-08-01T07:47:49Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![rb26\_marco](https://avatars.discourse-cdn.com/v4/letter/r/2bfe46/32.png) [@rb26\_marco](https://forums.speedlife.net/u/rb26_marco)\
**Post date:** [August 1, 2006, 7:47am UTC](https://forums.speedlife.net/t/wtb-bell-housing-and-flywheel-bolts-4-sr/98509/1 "2006-08-01T07:47:49Z")

</div>

i need the bell housing and flywheel bolts for an sr20 tranny,m engine and flywheel

please help

pm me

---

<div class="post-metadata">

**Author:** ![robbbby](https://avatars.discourse-cdn.com/v4/letter/r/b19c9b/32.png) [@robbbby](https://forums.speedlife.net/u/robbbby)\
**Post date:** [August 1, 2006, 1:52pm UTC](https://forums.speedlife.net/t/wtb-bell-housing-and-flywheel-bolts-4-sr/98509/2 "2006-08-01T13:52:33Z")

</div>

You can buy the flywheel bolts from the dealership since you should be using new ones anyways. I bought mine which came from an older generation maxima which is the same size and thread pitch as an sr but uses a 6 sided bolt instead of a 12 sided which is much better IMO. They were only like $3 each.

---

<div class="post-metadata">

**Author:** ![slipperysilvia](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slipperysilvia/32/5485_2.png) [@slipperysilvia](https://forums.speedlife.net/u/slipperysilvia)\
**Post date:** [August 2, 2006, 8:42am UTC](https://forums.speedlife.net/t/wtb-bell-housing-and-flywheel-bolts-4-sr/98509/3 "2006-08-02T08:42:59Z")

</div>

the ka ones are different, has anyone cross ref’d and found out which usdm bolts fit into the sr block through ???

I have sr bolts if u need them…