# WTB CNC Center Vent Gauge Pod **URL:** \ **Category:** Classifieds\ **Created:** [March 11, 2010, 8:16pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357 "2010-03-11T20:16:24Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![91S131](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91s131/32/5732_2.png) [@91S131](https://forums.speedlife.net/u/91S131)\ **Post date:** [March 11, 2010, 8:16pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/1 "2010-03-11T20:16:24Z")
the brushed aluminum ones, for s13 replaces center vent, for 52mm gauges please. pm me ---
**Author:** ![kapetajr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kapetajr/32/5445_2.png) [@kapetajr](https://forums.speedlife.net/u/kapetajr)\ **Post date:** [March 11, 2010, 8:20pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/2 "2010-03-11T20:20:16Z")
eBay man. [http://cgi.ebay.ca/Nissan-240SX-CNC-Gauge-Pod-Vent-Aluminum-52mm-S13-180\_W0QQitemZ300404686014QQcmdZViewItemQQptZMotors\_Car\_Truck\_Parts\_Accessories?hash=item45f183bcbe#ht\_720wt\_948](http://cgi.ebay.ca/Nissan-240SX-CNC-Gauge-Pod-Vent-Aluminum-52mm-S13-180_W0QQitemZ300404686014QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item45f183bcbe#ht_720wt_948) ---
**Author:** ![91S131](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91s131/32/5732_2.png) [@91S131](https://forums.speedlife.net/u/91S131)\ **Post date:** [March 15, 2010, 12:04pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/3 "2010-03-15T12:04:10Z")
i do not like buying from ebay ---
**Author:** ![kapetajr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kapetajr/32/5445_2.png) [@kapetajr](https://forums.speedlife.net/u/kapetajr)\ **Post date:** [March 15, 2010, 12:24pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/4 "2010-03-15T12:24:08Z")
That guy is good to deal with. Pm me and I will give you his direct email addy, I bought my 60mm one from him they are good shit. Here is a pic if mine ![http://farm5.static.flickr.com/4057/4404591104_49f2c615a7_b.jpg](http://farm5.static.flickr.com/4057/4404591104_49f2c615a7_b.jpg) ---
**Author:** ![codyne](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/codyne/32/5629_2.png) [@codyne](https://forums.speedlife.net/u/codyne)\ **Post date:** [March 15, 2010, 1:21pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/5 "2010-03-15T13:21:38Z")
sorry to thread jack, i need one of also, but does anbody know where to find the ones that are angled so there pointed at the driver, like the on benson had on his car??? ---
**Author:** ![kapetajr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kapetajr/32/5445_2.png) [@kapetajr](https://forums.speedlife.net/u/kapetajr)\ **Post date:** [March 15, 2010, 1:39pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/6 "2010-03-15T13:39:21Z")
I would just buy a pod and the buy autometer angle rings. I think benson’s set up was custom, I could be wrong tho. ---
**Author:** ![jeeta\_s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeeta_s/32/5758_2.png) [@jeeta\_s](https://forums.speedlife.net/u/jeeta_s)\ **Post date:** [March 15, 2010, 6:39pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/7 "2010-03-15T18:39:22Z")
does this guy also have it for under the deck? ---
**Author:** ![91S131](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91s131/32/5732_2.png) [@91S131](https://forums.speedlife.net/u/91S131)\ **Post date:** [March 15, 2010, 7:58pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/8 "2010-03-15T19:58:54Z")
nice dcc by the way, does it fully function lol ? Ill email the guy, also did you just glue the pod in ? ---
**Author:** ![kapetajr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kapetajr/32/5445_2.png) [@kapetajr](https://forums.speedlife.net/u/kapetajr)\ **Post date:** [March 15, 2010, 9:18pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/9 "2010-03-15T21:18:24Z")
> [@jeeta\_s](#): > > does this guy also have it for under the deck? no he prolly could make them tho me and a buddy are trying to get something made, I want a full double din delete panel. There are some glow shift ones on eBay 52mm iirc > [@91S13](#): > > nice dcc by the way, does it fully function lol ? Ill email the guy, also did you just glue the pod in ? thanks lol define “fully functional” hahah. It’s not working other than looking good in there, I tried to wire it up so it would at least turn on, but I suck at wiring. I am gonna have Ted hook it up for me once the car is on the road. For the pod it pretty much just sat in the slot, I just put some silicone on the back just incase ---
**Author:** ![rmallari](https://avatars.discourse-cdn.com/v4/letter/r/898d66/32.png) [@rmallari](https://forums.speedlife.net/u/rmallari)\ **Post date:** [March 15, 2010, 10:15pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/10 "2010-03-15T22:15:14Z")
> [@codyne](#): > > sorry to thread jack, i need one of also, but does anbody know where to find the ones that are angled so there pointed at the driver, like the on benson had on his car??? those angled ones were custom made by Oni-kyan (515 innovations) loong time ago, only a limited number of them are still around i guess. luckily i found one from another member a while back. just keep a lookout on whose got them and wait till they sell. i remember someone using it on their 180sx/silvia, they flipped it over since rhd but its pointed upward. heres a pic of mine ![http://i110.photobucket.com/albums/n107/rmallari/9.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/4/b/4b5f4df213c406fc79141727cbda9315109b9e7d.jpeg) > [@kapetajr](#): > > thanks lol define “fully functional” hahah. It’s not working other than looking good in there, I tried to wire it up so it would at least turn on, but I suck at wiring. I am gonna have Ted hook it up for me once the car is on the road. hey kapetajr, do you have all the sensors and the mix door motor included with your dcc? i’m curious as to how the motor is setup in yours if you have it installed. ---
**Author:** ![kapetajr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kapetajr/32/5445_2.png) [@kapetajr](https://forums.speedlife.net/u/kapetajr)\ **Post date:** [March 15, 2010, 10:27pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/11 "2010-03-15T22:27:54Z")
Rmallari I pm’d you ---
**Author:** ![Wongger](https://avatars.discourse-cdn.com/v4/letter/w/41988e/32.png) [@Wongger](https://forums.speedlife.net/u/Wongger)\ **Post date:** [March 16, 2010, 6:27am UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/12 "2010-03-16T06:27:47Z")
If you get him to make one that goes below the deck I want one 🙂 ---
**Author:** ![jeeta\_s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeeta_s/32/5758_2.png) [@jeeta\_s](https://forums.speedlife.net/u/jeeta_s)\ **Post date:** [March 16, 2010, 1:34pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/13 "2010-03-16T13:34:04Z")
> [@Wongger](#): > > If you get him to make one that goes below the deck I want one 🙂 same, haha this just became a group buy ---
**Author:** ![kapetajr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kapetajr/32/5445_2.png) [@kapetajr](https://forums.speedlife.net/u/kapetajr)\ **Post date:** [March 16, 2010, 4:27pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/14 "2010-03-16T16:27:00Z")
Lol who wants to take the measurements lol, I am too lazy. ---
**Author:** ![Wongger](https://avatars.discourse-cdn.com/v4/letter/w/41988e/32.png) [@Wongger](https://forums.speedlife.net/u/Wongger)\ **Post date:** [March 16, 2010, 5:50pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/15 "2010-03-16T17:50:02Z")
Well I just measured that plastic tray under the deck. Its about 7 1/4 inch wide by 2 1/4 inch tall. ---------- Post added at 08:50 PM ---------- Previous post was at 08:45 PM ---------- this is for a s13 ---
**Author:** ![kapetajr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kapetajr/32/5445_2.png) [@kapetajr](https://forums.speedlife.net/u/kapetajr)\ **Post date:** [March 16, 2010, 6:00pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/16 "2010-03-16T18:00:40Z")
Ok I will let you guys know what he wants for each of the panels, or see if he can come on here. ---
**Author:** ![jeeta\_s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeeta_s/32/5758_2.png) [@jeeta\_s](https://forums.speedlife.net/u/jeeta_s)\ **Post date:** [March 16, 2010, 6:10pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/17 "2010-03-16T18:10:06Z")
arite that sounds good, ill double check the measurements too ---
**Author:** ![Wongger](https://avatars.discourse-cdn.com/v4/letter/w/41988e/32.png) [@Wongger](https://forums.speedlife.net/u/Wongger)\ **Post date:** [March 16, 2010, 8:41pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/18 "2010-03-16T20:41:09Z")
Awesommee 🙂 What size is he making? 52mm or 60mm? ---
**Author:** ![kapetajr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kapetajr/32/5445_2.png) [@kapetajr](https://forums.speedlife.net/u/kapetajr)\ **Post date:** [March 16, 2010, 8:53pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/19 "2010-03-16T20:53:28Z")
For below the deck? I dunno. I know for ac vents he has 60mm and 52mm. ---
**Author:** ![Wongger](https://avatars.discourse-cdn.com/v4/letter/w/41988e/32.png) [@Wongger](https://forums.speedlife.net/u/Wongger)\ **Post date:** [March 16, 2010, 8:57pm UTC](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357/20 "2010-03-16T20:57:17Z")
Yah, I need my vents though lol. Just let us know what he says Thanks kapetajr [Next page](https://forums.speedlife.net/t/wtb-cnc-center-vent-gauge-pod/151357.md?page=2)