# wtb: Cusco/safety 21 (4/5/6)pt roll bar **URL:** \ **Category:** Classifieds\ **Created:** [April 5, 2009, 2:00pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259 "2009-04-05T14:00:33Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Cal-SoY](https://avatars.discourse-cdn.com/v4/letter/c/91b2a8/32.png) [@Cal-SoY](https://forums.speedlife.net/u/Cal-SoY)\ **Post date:** [April 5, 2009, 2:00pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/1 "2009-04-05T14:00:33Z")
Hey guys Looking for a bolt-in cusco/safety 21 roll bar. Either 4, 5 or 6 pt will be fine and i’ll pay accordingly for either. Very important that the setup be complete meaning it should have the following parts for a 4pt whether the 5 or 6 is complete enough for me depends if it has the rear supporting bars liek the picture below. ![http://www.rhdjapan.com/images/product/31173/Image/Normal/Image.jpg](http://www.rhdjapan.com/images/product/31173/Image/Normal/Image.jpg) Here’s what the line up looks like, i’m looking for any of the first 3 from the left. ![http://img.photobucket.com/albums/v498/chanzheng/db53e38b.gif](http://img.photobucket.com/albums/v498/chanzheng/db53e38b.gif) Colour doesnt matter, you couldve painted it the colours of san francisco for all i care. thanks guys, -cal ---
**Author:** ![Cal-SoY](https://avatars.discourse-cdn.com/v4/letter/c/91b2a8/32.png) [@Cal-SoY](https://forums.speedlife.net/u/Cal-SoY)\ **Post date:** [April 5, 2009, 2:02pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/2 "2009-04-05T14:02:06Z")
Sorry the picture above is from a honda, here’s a better one of what an s13 one should look like. [img][http://www.rhdjapan.com/images/product/31196/Image/Normal/Image.jpg](http://www.rhdjapan.com/images/product/31196/Image/Normal/Image.jpg)[/img ---
**Author:** ![Cal-SoY](https://avatars.discourse-cdn.com/v4/letter/c/91b2a8/32.png) [@Cal-SoY](https://forums.speedlife.net/u/Cal-SoY)\ **Post date:** [April 5, 2009, 2:03pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/3 "2009-04-05T14:03:59Z")
![http://www.rhdjapan.com/images/product/31196/Image/Normal/Image.jpg](http://www.rhdjapan.com/images/product/31196/Image/Normal/Image.jpg) ---
**Author:** ![Cal-SoY](https://avatars.discourse-cdn.com/v4/letter/c/91b2a8/32.png) [@Cal-SoY](https://forums.speedlife.net/u/Cal-SoY)\ **Post date:** [April 18, 2009, 9:06am UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/4 "2009-04-18T09:06:57Z")
Anyone at all?! ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [April 18, 2009, 9:20am UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/5 "2009-04-18T09:20:10Z")
[http://www.napsusa.com/rollcage1.htm](http://www.napsusa.com/rollcage1.htm) ---
**Author:** ![RED\_LINE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/red_line/32/5656_2.png) [@RED\_LINE](https://forums.speedlife.net/u/RED_LINE)\ **Post date:** [April 18, 2009, 10:55am UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/6 "2009-04-18T10:55:01Z")
why not make a custom roll cage bro? wouldn’t it be cheaper? ---
**Author:** ![Cal-SoY](https://avatars.discourse-cdn.com/v4/letter/c/91b2a8/32.png) [@Cal-SoY](https://forums.speedlife.net/u/Cal-SoY)\ **Post date:** [April 18, 2009, 9:29pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/7 "2009-04-18T21:29:43Z")
> [@Helloooo witness protection program!](https://forums.speedlife.net/t/helloooo-witness-protection-program/21555/18): > > [porkbun.com | parked domain](http://www.napsusa.com/rollcage1.htm) Not considering buying brand new from states. Shipping and exchange will kill me. Looking to buy second hand from a fellow member or importer. > [@Gayest Emo Kid Ever...](https://forums.speedlife.net/t/gayest-emo-kid-ever/21376/22): > > why not make a custom roll cage bro? wouldn’t it be cheaper? I’ve researched and been quoted locally. Its just not cost-effective to produce these custom since there isnt a high demand. I would go to an importer, but no one in the GTA has one. ---
**Author:** ![Cal-SoY](https://avatars.discourse-cdn.com/v4/letter/c/91b2a8/32.png) [@Cal-SoY](https://forums.speedlife.net/u/Cal-SoY)\ **Post date:** [April 28, 2009, 6:28am UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/8 "2009-04-28T06:28:57Z")
Bump, Anyone?! ---
**Author:** ![Ciaran](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ciaran/32/5612_2.png) [@Ciaran](https://forums.speedlife.net/u/Ciaran)\ **Post date:** [April 28, 2009, 8:01am UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/9 "2009-04-28T08:01:46Z")
buy from states, install it whilst there, enjoy road trip. ---
**Author:** ![CSK-240-R1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/csk-240-r1/32/5698_2.png) [@CSK-240-R1](https://forums.speedlife.net/u/CSK-240-R1)\ **Post date:** [April 28, 2009, 4:44pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/10 "2009-04-28T16:44:28Z")
not a bad plan , id cruise ---
**Author:** ![HayMakr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/haymakr/32/5738_2.png) [@HayMakr](https://forums.speedlife.net/u/HayMakr)\ **Post date:** [April 28, 2009, 5:12pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/11 "2009-04-28T17:12:40Z")
just go see garth at webber chasis in cambridge. fuck this mass production bolt-in honda crap. ---
**Author:** ![BRA\_GANZAAAAAA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bra_ganzaaaaaa/32/5673_2.png) [@BRA\_GANZAAAAAA](https://forums.speedlife.net/u/BRA_GANZAAAAAA)\ **Post date:** [April 28, 2009, 7:28pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/12 "2009-04-28T19:28:54Z")
there’s a shop that quoted me 800$ for 6 point custom cage forgot the name of it i’ll post when i figure it out, those bolt in cages look sketchy ---
**Author:** ![prozac3ne2nr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/prozac3ne2nr/32/5581_2.png) [@prozac3ne2nr](https://forums.speedlife.net/u/prozac3ne2nr)\ **Post date:** [April 28, 2009, 8:21pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/13 "2009-04-28T20:21:32Z")
user Briggs had one for sale, check his threads. ---
**Author:** ![D1champ](https://avatars.discourse-cdn.com/v4/letter/d/b5e925/32.png) [@D1champ](https://forums.speedlife.net/u/D1champ)\ **Post date:** [April 28, 2009, 9:41pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/14 "2009-04-28T21:41:38Z")
I have a safety 21 6pt through the dash cage. I also have a harness bar aswell if you are looking for one. I imported brand new it from Japan when I used to work at FedEx. It’s been in my car since last year but has seen 0 track time cuz It’s only a daily driver. Lemme know if you want it. PM me or email me [tunerlab@gmail.com](mailto:tunerlab@gmail.com) ---
**Author:** ![Cal-SoY](https://avatars.discourse-cdn.com/v4/letter/c/91b2a8/32.png) [@Cal-SoY](https://forums.speedlife.net/u/Cal-SoY)\ **Post date:** [April 30, 2009, 2:49pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/15 "2009-04-30T14:49:39Z")
Briggs’ bar/cage is for s14. Sorry D1champ. Montreal is too far. If i were to make the trip out there i’d just go to some of the importers as i’d prefer a 4 pt as opposed to a 6. ---
**Author:** ![NewfoundlandDude](https://avatars.discourse-cdn.com/v4/letter/n/9fc348/32.png) [@NewfoundlandDude](https://forums.speedlife.net/u/NewfoundlandDude)\ **Post date:** [April 30, 2009, 3:09pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/16 "2009-04-30T15:09:54Z")
Plus I bought Briggs cage…lol ---
**Author:** ![Ciaran](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ciaran/32/5612_2.png) [@Ciaran](https://forums.speedlife.net/u/Ciaran)\ **Post date:** [April 30, 2009, 3:12pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/17 "2009-04-30T15:12:08Z")
> [@RC Car/Truck thread](https://forums.speedlife.net/t/rc-car-truck-thread/21682/39): > > not a bad plan , id cruise lol, so when are we going? ---
**Author:** ![CSK-240-R1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/csk-240-r1/32/5698_2.png) [@CSK-240-R1](https://forums.speedlife.net/u/CSK-240-R1)\ **Post date:** [April 30, 2009, 4:24pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/18 "2009-04-30T16:24:14Z")
i dont care man id go tommorow ---
**Author:** ![Cal-SoY](https://avatars.discourse-cdn.com/v4/letter/c/91b2a8/32.png) [@Cal-SoY](https://forums.speedlife.net/u/Cal-SoY)\ **Post date:** [May 6, 2009, 9:23pm UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/19 "2009-05-06T21:23:10Z")
bumpity ---
**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\ **Post date:** [May 7, 2009, 5:51am UTC](https://forums.speedlife.net/t/wtb-cusco-safety-21-4-5-6-pt-roll-bar/123259/20 "2009-05-07T05:51:30Z")
I’ve got a rear 4pt setup that I may consider parting with. Its mandrel bent from 1.50’’ x .120’’ DOM with the main hoop/stays full braced and gusseted. 100% bolt in and could be Powder Coated any colour. If interested then shoot me a pm and we can talk about it.