# WTB: Digital Display

**URL:** <https://forums.speedlife.net/t/wtb-digital-display/9465>\
**Category:** Classifieds\
**Created:** [March 18, 2006, 5:24am UTC](https://forums.speedlife.net/t/wtb-digital-display/9465 "2006-03-18T05:24:54Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![NYSFF](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nysff/32/7353_2.png) [@NYSFF](https://forums.speedlife.net/u/NYSFF)\
**Post date:** [March 18, 2006, 5:24am UTC](https://forums.speedlife.net/t/wtb-digital-display/9465/1 "2006-03-18T05:24:54Z")

</div>

I was hoping to find a Digital dash for the 98 vic i have. Anyone know where to get one cheap?

Also looking to replace my turn style heater control to Digital

This is the look Im going for  
 ![http://img.photobucket.com/albums/v118/Buffalony/LX_SPORT_INTERIOR_800600_02.jpg](http://img.photobucket.com/albums/v118/Buffalony/LX_SPORT_INTERIOR_800600_02.jpg)

---

<div class="post-metadata">

**Author:** ![73ghia](https://avatars.discourse-cdn.com/v4/letter/7/8baadc/32.png) [@73ghia](https://forums.speedlife.net/u/73ghia)\
**Post date:** [March 18, 2006, 10:22am UTC](https://forums.speedlife.net/t/wtb-digital-display/9465/2 "2006-03-18T10:22:09Z")

</div>

digital heat will be a LOT harder to get than the digital display. It depends if your 98 vic’s “analog” dash is wire driven, or if it’s just digital with analog gauges. My focus uses digital sending units for analog gauges… if the Vic has that then you’d just need to probably repalce the cluster… if not… then you are looking at replacing the sending units as well.

---

<div class="post-metadata">

**Author:** ![Bacon](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bacon/32/7230_2.png) [@Bacon](https://forums.speedlife.net/u/Bacon)\
**Post date:** [March 18, 2006, 10:30am UTC](https://forums.speedlife.net/t/wtb-digital-display/9465/3 "2006-03-18T10:30:34Z")

</div>

Pretty sure this would apply here but a digital dash swap on the taurus ended up having to run 1 wire from the computer as well as a few others being swaped. So not overly hard.

As for digital climate control. There will be a lot of new wiring harnesses/sensors put in place. And chances are it probably uses vaccum silanoids so it would need a few vaccum lines run. As well as the silanoids to move everything.

Is other words:  
Dash = possible  
Climate control = nightmare

---

<div class="post-metadata">

**Author:** ![NYSFF](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nysff/32/7353_2.png) [@NYSFF](https://forums.speedlife.net/u/NYSFF)\
**Post date:** [March 18, 2006, 11:01am UTC](https://forums.speedlife.net/t/wtb-digital-display/9465/4 "2006-03-18T11:01:30Z")

</div>

Okay then Never mind, Sounds like this is way to involved! Maybe I can find a wreaked one that I can just swap everything over.

---

<div class="post-metadata">

**Author:** ![73ghia](https://avatars.discourse-cdn.com/v4/letter/7/8baadc/32.png) [@73ghia](https://forums.speedlife.net/u/73ghia)\
**Post date:** [March 18, 2006, 11:12am UTC](https://forums.speedlife.net/t/wtb-digital-display/9465/5 "2006-03-18T11:12:04Z")

</div>

I’d find a wrecked dash… but def dont do the climate controll. Or check forums and find out if your “analog” gauge dash is digitally controlled or not.