# WTB: Fuel lines!!!

**URL:** <https://forums.speedlife.net/t/wtb-fuel-lines/99638>\
**Category:** Classifieds\
**Created:** [September 6, 2006, 3:42pm UTC](https://forums.speedlife.net/t/wtb-fuel-lines/99638 "2006-09-06T15:42:59Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![FUNGC](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fungc/32/5539_2.png) [@FUNGC](https://forums.speedlife.net/u/FUNGC)\
**Post date:** [September 6, 2006, 3:42pm UTC](https://forums.speedlife.net/t/wtb-fuel-lines/99638/1 "2006-09-06T15:42:59Z")

</div>

im in need of both to and return fuel lines. mines leaking badly.

for S13\*\*\*

thnx

curtis

---

<div class="post-metadata">

**Author:** ![Bero](https://avatars.discourse-cdn.com/v4/letter/b/e8c25b/32.png) [@Bero](https://forums.speedlife.net/u/Bero)\
**Post date:** [September 6, 2006, 4:28pm UTC](https://forums.speedlife.net/t/wtb-fuel-lines/99638/2 "2006-09-06T16:28:04Z")

</div>

go to an automotive store and pick up teh same diameter fuel hose. softline will do… but hardline isnt too expensive to buy. you’ll just need a bender and a flaring tool.

dont forget new fuel hose clamps too.

the whole thing can be done for about 75 bucks.

---

<div class="post-metadata">

**Author:** ![FUNGC](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fungc/32/5539_2.png) [@FUNGC](https://forums.speedlife.net/u/FUNGC)\
**Post date:** [September 6, 2006, 5:42pm UTC](https://forums.speedlife.net/t/wtb-fuel-lines/99638/3 "2006-09-06T17:42:56Z")

</div>

whole thing done for 75 bucks? like straight from nissan? if not where?

cause yea, i got tha soft line and i repaired my old 240 like that, but just when i cutted out tha bad spots i sorta bent one line a little too far, and i guess it cracked in another place. now its leaking it another place…

soo i was thinking i should just replace the whole thing.

---

<div class="post-metadata">

**Author:** ![Pants](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pants/32/5590_2.png) [@Pants](https://forums.speedlife.net/u/Pants)\
**Post date:** [September 6, 2006, 5:46pm UTC](https://forums.speedlife.net/t/wtb-fuel-lines/99638/4 "2006-09-06T17:46:33Z")

</div>

i think he is talking about all the lines and tools you need will add up to  
$75 you will have to do it your self. it is not that hard

---

<div class="post-metadata">

**Author:** ![FUNGC](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fungc/32/5539_2.png) [@FUNGC](https://forums.speedlife.net/u/FUNGC)\
**Post date:** [September 6, 2006, 5:47pm UTC](https://forums.speedlife.net/t/wtb-fuel-lines/99638/5 "2006-09-06T17:47:15Z")

</div>

yea… should have figured… LOLL

---

<div class="post-metadata">

**Author:** ![robbbby](https://avatars.discourse-cdn.com/v4/letter/r/b19c9b/32.png) [@robbbby](https://forums.speedlife.net/u/robbbby)\
**Post date:** [September 6, 2006, 5:58pm UTC](https://forums.speedlife.net/t/wtb-fuel-lines/99638/6 "2006-09-06T17:58:54Z")

</div>

I have both feed and return hardlines for an s13.  
I’m located in Windsor though.

---

<div class="post-metadata">

**Author:** ![snowboard\_240sx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/snowboard_240sx/32/5519_2.png) [@snowboard\_240sx](https://forums.speedlife.net/u/snowboard_240sx)\
**Post date:** [September 6, 2006, 6:06pm UTC](https://forums.speedlife.net/t/wtb-fuel-lines/99638/7 "2006-09-06T18:06:17Z")

</div>

what u do is get a few feet of fuel injection line, and 6ft brake line two of them…and then theres no bending required

---

<div class="post-metadata">

**Author:** ![crsbb](https://avatars.discourse-cdn.com/v4/letter/c/b9bd4f/32.png) [@crsbb](https://forums.speedlife.net/u/crsbb)\
**Post date:** [September 6, 2006, 7:37pm UTC](https://forums.speedlife.net/t/wtb-fuel-lines/99638/8 "2006-09-06T19:37:47Z")

</div>

pwnage of the fuel line. I love quality nissan’s