# WTB: Gaskets
**URL:** https://forums.speedlife.net/t/wtb-gaskets/113856
**Category:** Classifieds
**Created:** [March 13, 2008, 3:49pm UTC](https://forums.speedlife.net/t/wtb-gaskets/113856 "2008-03-13T15:49:21Z")
**Posts on this page:** 12
**Page:** 1
### Author:  [@jlee](https://forums.speedlife.net/u/jlee)
#### Post date: [March 13, 2008, 3:49pm UTC](https://forums.speedlife.net/t/wtb-gaskets/113856/1 "2008-03-13T15:49:21Z")
Ok, so I got new Throttle body and intake manifold gaskets using the cross over parts list in the FAQ section. But I still haven’t been able to find the gasket for the Idle Air Control Valve. In the Redtop SR cross over parts list in the FAQ section it shows…
Idle Air Control Valve - Gasket - 23785-50F00
Idle Air Control Valve - Gasket - 23781-50F05 (Tousoku)
Idle Air Control Valve - Gasket - 23781-50F15 (Atsugi)
I checked at scarborough nissan and they weren’t able to find those part numbers listed.
If anyone has swapped out their intake manifold and knows of where I could find these locally and in stock let me know. I’ve also been told that if I can’t get the gasket, liquid red silicone gasket will work as well. Anyone have any input?
Thanks.
Jon
---
### Author:  [@jlee](https://forums.speedlife.net/u/jlee)
#### Post date: [March 13, 2008, 7:04pm UTC](https://forums.speedlife.net/t/wtb-gaskets/113856/2 "2008-03-13T19:04:05Z")
nobody’s replaced any of these gaskets on their SR? I saw the cross reference parts thread in the FAQ section but what does FAST mean?
Jon
---
### Author:  [@jlee](https://forums.speedlife.net/u/jlee)
#### Post date: [March 14, 2008, 12:59pm UTC](https://forums.speedlife.net/t/wtb-gaskets/113856/3 "2008-03-14T12:59:35Z")
ok, I got the throttle body gasket.
I need IAC/AAC Valve gasket. Help please!!
Jon
---
### Author:  [@FUNGC](https://forums.speedlife.net/u/FUNGC)
#### Post date: [March 15, 2008, 1:10pm UTC](https://forums.speedlife.net/t/wtb-gaskets/113856/4 "2008-03-15T13:10:12Z")
use liquid gasket for now. or you can get those paper ones and trace and cut out the shape u need for the IACV.
---
### Author:  [@jlee](https://forums.speedlife.net/u/jlee)
#### Post date: [March 15, 2008, 1:20pm UTC](https://forums.speedlife.net/t/wtb-gaskets/113856/5 "2008-03-15T13:20:12Z")
but won’t the liquid gasket ooose out inside? if it ooses outside i can wipe the excess off but if it ooses inside won’t that restrict air flow?
and what type high temp silicon liquid gasket?
Jon
---
### Author:  [@FUNGC](https://forums.speedlife.net/u/FUNGC)
#### Post date: [March 15, 2008, 1:30pm UTC](https://forums.speedlife.net/t/wtb-gaskets/113856/6 "2008-03-15T13:30:18Z")
you use a small amount then run your finger through the inside rim to get the excess liquid gasket out. then you will be fine if you did it correctly.
---
### Author:  [@jlee](https://forums.speedlife.net/u/jlee)
#### Post date: [March 15, 2008, 1:42pm UTC](https://forums.speedlife.net/t/wtb-gaskets/113856/7 "2008-03-15T13:42:36Z")
excuse my lack of knowledge… but how do i get my finger in there? lol
i guess the key is to not put too much close to the inside edge. I’ll try it out.
Jon
---
### Author:  [@FUNGC](https://forums.speedlife.net/u/FUNGC)
#### Post date: [March 15, 2008, 1:48pm UTC](https://forums.speedlife.net/t/wtb-gaskets/113856/8 "2008-03-15T13:48:20Z")
well you are replacing that IACV gasket right? soo you are going to take off the four bolts holding it in. so since its apart you could run your finger inside of it.
---
### Author:  [@jlee](https://forums.speedlife.net/u/jlee)
#### Post date: [March 15, 2008, 1:52pm UTC](https://forums.speedlife.net/t/wtb-gaskets/113856/9 "2008-03-15T13:52:59Z")
yea yea… but i mean when i tighten it back when installing… the liquid gasket will oose out the inside edge… no worries… i’ll try it out and see… haha thanks.
Jon
---
### Author:  [@jlee](https://forums.speedlife.net/u/jlee)
#### Post date: [March 31, 2008, 8:27am UTC](https://forums.speedlife.net/t/wtb-gaskets/113856/10 "2008-03-31T08:27:27Z")
bump! still looking for IAC Valve gasket…
Jon
---
### Author:  [@Sky14](https://forums.speedlife.net/u/Sky14)
#### Post date: [March 31, 2008, 9:29am UTC](https://forums.speedlife.net/t/wtb-gaskets/113856/11 "2008-03-31T09:29:47Z")
use rice
---
### Author:  [@jlee](https://forums.speedlife.net/u/jlee)
#### Post date: [March 31, 2008, 11:58am UTC](https://forums.speedlife.net/t/wtb-gaskets/113856/12 "2008-03-31T11:58:11Z")
^^ lol… shut up mikey… real input please…
Jon