# WTB : lower control arms **URL:** \ **Category:** Classifieds\ **Created:** [July 4, 2006, 11:38am UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622 "2006-07-04T11:38:31Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![flyingchicken](https://avatars.discourse-cdn.com/v4/letter/f/ac91a4/32.png) [@flyingchicken](https://forums.speedlife.net/u/flyingchicken)\ **Post date:** [July 4, 2006, 11:38am UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/1 "2006-07-04T11:38:31Z")
_EDITED_ i need lower control arms with good bushings… and need to know if the s14 TC rod fits the s13 anyways,i’m located i scarborough, and i’m willing to pick up from pickering all the way to missasauga and north …richmondhill area. new would be best?..bing? help? ---
**Author:** ![jammin1911](https://avatars.discourse-cdn.com/v4/letter/j/a9a28c/32.png) [@jammin1911](https://forums.speedlife.net/u/jammin1911)\ **Post date:** [July 4, 2006, 12:45pm UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/2 "2006-07-04T12:45:43Z")
unfortunately bing only makes rear multilink :-/ ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [July 4, 2006, 12:47pm UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/3 "2006-07-04T12:47:56Z")
call Arm-can in eitehr ssuaga or Scar for the FLCA with new bushings pressed in. the guy sells them on ebay as well. front TC rods are stupid expensive to buy new from nissan and there are no aftermarket OEM replacements as faras i know unless you go with urethane filled bushings from either nismo or PDM. best bet is to buy some stock ones off someone who upgraded, make sure they are not leaking. tie rods are super cheap, buy S14 spec, its the same thing but thicker for inner and outter. ---
**Author:** ![MrSkinny](https://avatars.discourse-cdn.com/v4/letter/m/59ef9b/32.png) [@MrSkinny](https://forums.speedlife.net/u/MrSkinny)\ **Post date:** [July 4, 2006, 1:17pm UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/4 "2006-07-04T13:17:36Z")
attempt the install yourself. if u got a few sockets and some mucles you should be ok. ---
**Author:** ![Theo23](https://avatars.discourse-cdn.com/v4/letter/t/43a26b/32.png) [@Theo23](https://forums.speedlife.net/u/Theo23)\ **Post date:** [July 4, 2006, 2:48pm UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/5 "2006-07-04T14:48:46Z")
> [@MrSkinny](#): > > attempt the install yourself. if u got a few sockets and some **muscles** you should be ok. If Vince can do it, you should have no problem at all 😉 Sorry Vinny ---
**Author:** ![alesserfate](https://avatars.discourse-cdn.com/v4/letter/a/f6c823/32.png) [@alesserfate](https://forums.speedlife.net/u/alesserfate)\ **Post date:** [July 4, 2006, 4:00pm UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/6 "2006-07-04T16:00:27Z")
i got everything you need ---
**Author:** ![Lucidsnow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lucidsnow/32/5538_2.png) [@Lucidsnow](https://forums.speedlife.net/u/Lucidsnow)\ **Post date:** [July 4, 2006, 5:12pm UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/7 "2006-07-04T17:12:49Z")
> [@Theo23](#): > > [quote=MrSkinny]attempt the install yourself. if u got a few sockets and some **muscles** you should be ok. If Vince can do it, you should have no problem at all 😉 Sorry Vinny[/quote] LOL im super skinny chinese dude… if i can do it u can too … breakerbar helps or a long rod… lol ---
**Author:** ![flyingchicken](https://avatars.discourse-cdn.com/v4/letter/f/ac91a4/32.png) [@flyingchicken](https://forums.speedlife.net/u/flyingchicken)\ **Post date:** [July 4, 2006, 8:42pm UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/8 "2006-07-04T20:42:15Z")
pm’d hey willx, u up for another flyingchicken drive way project? 😃 huh huh huh? ---
**Author:** ![flyingchicken](https://avatars.discourse-cdn.com/v4/letter/f/ac91a4/32.png) [@flyingchicken](https://forums.speedlife.net/u/flyingchicken)\ **Post date:** [July 4, 2006, 11:14pm UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/9 "2006-07-04T23:14:20Z")
does the lower control arm need to be replaced? like to do an alignment… it seems ok when i took a look at it ---
**Author:** ![MRWmotorsports](https://avatars.discourse-cdn.com/v4/letter/m/f14d63/32.png) [@MRWmotorsports](https://forums.speedlife.net/u/MRWmotorsports)\ **Post date:** [July 5, 2006, 9:27am UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/10 "2006-07-05T09:27:43Z")
> [@flyingchicken](#): > > does the lower control arm need to be replaced? like to do an alignment… > it seems ok when i took a look at it It’s not really the lower control arms that you need, I’m guessing that the ball joints are both worn and they don’t know that you can just replace the ball joints. However if someone has LCA’s with decent ball joints then it will be cheaper to do it this way as you can do these yourself without the need to have new ball joint pressed out/in. -Martin. ---
**Author:** ![flyingchicken](https://avatars.discourse-cdn.com/v4/letter/f/ac91a4/32.png) [@flyingchicken](https://forums.speedlife.net/u/flyingchicken)\ **Post date:** [July 7, 2006, 9:41am UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/11 "2006-07-07T09:41:28Z")
bump and are s14 tension rods the same as s13 and interchngable? ---
**Author:** ![alesserfate](https://avatars.discourse-cdn.com/v4/letter/a/f6c823/32.png) [@alesserfate](https://forums.speedlife.net/u/alesserfate)\ **Post date:** [July 7, 2006, 9:49am UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/12 "2006-07-07T09:49:50Z")
> [@flyingchicken](#): > > bump > > and are s14 tension rods the same as s13 and interchngable? no you cannot used S14 tc rods in an S13, they are slightly different ---
**Author:** ![ziptied](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ziptied/32/5509_2.png) [@ziptied](https://forums.speedlife.net/u/ziptied)\ **Post date:** [July 7, 2006, 10:17am UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/13 "2006-07-07T10:17:00Z")
> [@flyingchicken](#): > > pm’d > > hey willx, u up for another flyingchicken drive way project? 😃 huh huh huh? yeah yeah just let me know when ---
**Author:** ![flyingchicken](https://avatars.discourse-cdn.com/v4/letter/f/ac91a4/32.png) [@flyingchicken](https://forums.speedlife.net/u/flyingchicken)\ **Post date:** [July 8, 2006, 10:00am UTC](https://forums.speedlife.net/t/wtb-lower-control-arms/97622/14 "2006-07-08T10:00:53Z")
got my tension rod and tie rod…so mods can lock this…i guess i went to do an alignment at nissan, came out with everything broken…