# WTB(orrow) B Series Clutch alignment tool.

**URL:** <https://forums.speedlife.net/t/wtb-orrow-b-series-clutch-alignment-tool/197125>\
**Category:** Classifieds\
**Created:** [April 27, 2008, 3:08pm UTC](https://forums.speedlife.net/t/wtb-orrow-b-series-clutch-alignment-tool/197125 "2008-04-27T15:08:42Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![I\_3myHONDA](https://avatars.discourse-cdn.com/v4/letter/i/45deac/32.png) [@I\_3myHONDA](https://forums.speedlife.net/u/I_3myHONDA)\
**Post date:** [April 27, 2008, 3:08pm UTC](https://forums.speedlife.net/t/wtb-orrow-b-series-clutch-alignment-tool/197125/1 "2008-04-27T15:08:42Z")

</div>

Just like the title says. I live in pleasant hills anyone within ten miles have one?

---

<div class="post-metadata">

**Author:** ![matt94z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matt94z/32/6040_2.png) [@matt94z](https://forums.speedlife.net/u/matt94z)\
**Post date:** [April 27, 2008, 3:25pm UTC](https://forums.speedlife.net/t/wtb-orrow-b-series-clutch-alignment-tool/197125/2 "2008-04-27T15:25:13Z")

</div>

I have a brand new exeddy stock replacement…$35 includes pressure plate and disc.

---

<div class="post-metadata">

**Author:** ![I\_3myHONDA](https://avatars.discourse-cdn.com/v4/letter/i/45deac/32.png) [@I\_3myHONDA](https://forums.speedlife.net/u/I_3myHONDA)\
**Post date:** [April 27, 2008, 4:44pm UTC](https://forums.speedlife.net/t/wtb-orrow-b-series-clutch-alignment-tool/197125/3 "2008-04-27T16:44:24Z")

</div>

i dont need a clutch, i need an alignment tool

---

<div class="post-metadata">

**Author:** ![matt94z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matt94z/32/6040_2.png) [@matt94z](https://forums.speedlife.net/u/matt94z)\
**Post date:** [April 27, 2008, 5:48pm UTC](https://forums.speedlife.net/t/wtb-orrow-b-series-clutch-alignment-tool/197125/4 "2008-04-27T17:48:29Z")

</div>

oh hahahaha sorry, I guess I missed that part.

---

<div class="post-metadata">

**Author:** ![vw16vcabby](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/vw16vcabby/32/5943_2.png) [@vw16vcabby](https://forums.speedlife.net/u/vw16vcabby)\
**Post date:** [April 27, 2008, 8:10pm UTC](https://forums.speedlife.net/t/wtb-orrow-b-series-clutch-alignment-tool/197125/5 "2008-04-27T20:10:03Z")

</div>

use a socket a little smaller than the spline diameter. not the correct way, but if you are in a pinch, it works. it will keep the disk centered while you bolt up the pressure plate.

---

<div class="post-metadata">

**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\
**Post date:** [April 27, 2008, 8:20pm UTC](https://forums.speedlife.net/t/wtb-orrow-b-series-clutch-alignment-tool/197125/6 "2008-04-27T20:20:32Z")

</div>

> [@Hi slight\_smile](https://forums.speedlife.net/t/hi/36113/23):
>
> use a socket a little smaller than the spline diameter. not the correct way, but if you are in a pinch, it works. it will keep the disk centered while you bolt up the pressure plate.

I use a socket that fits in the the little bearing. and then wrap tape around the socket untill it fits snug on the clutch.

works best with a Deep socket like 9mm 3/8" drive

---

<div class="post-metadata">

**Author:** ![I\_3myHONDA](https://avatars.discourse-cdn.com/v4/letter/i/45deac/32.png) [@I\_3myHONDA](https://forums.speedlife.net/u/I_3myHONDA)\
**Post date:** [April 27, 2008, 8:39pm UTC](https://forums.speedlife.net/t/wtb-orrow-b-series-clutch-alignment-tool/197125/7 "2008-04-27T20:39:37Z")

</div>

i just got one, thanks for the hints though guys