# wtb: rb25 and ka driveshafts

**URL:** <https://forums.speedlife.net/t/wtb-rb25-and-ka-driveshafts/145567>\
**Category:** Classifieds\
**Created:** [January 9, 2007, 6:36pm UTC](https://forums.speedlife.net/t/wtb-rb25-and-ka-driveshafts/145567 "2007-01-09T18:36:57Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![airceo13](https://avatars.discourse-cdn.com/v4/letter/a/9de0a6/32.png) [@airceo13](https://forums.speedlife.net/u/airceo13)\
**Post date:** [January 9, 2007, 6:36pm UTC](https://forums.speedlife.net/t/wtb-rb25-and-ka-driveshafts/145567/1 "2007-01-09T18:36:57Z")

</div>

basically what the title says, im looking for an rb25 driveshaft and a ka driveshaft that would fit for my 92 240… thanks

jeff

---

<div class="post-metadata">

**Author:** ![GRIPPY](https://avatars.discourse-cdn.com/v4/letter/g/ad7895/32.png) [@GRIPPY](https://forums.speedlife.net/u/GRIPPY)\
**Post date:** [January 10, 2007, 11:04am UTC](https://forums.speedlife.net/t/wtb-rb25-and-ka-driveshafts/145567/2 "2007-01-10T11:04:41Z")

</div>

Is the 240 ABS or non ABS?

---

<div class="post-metadata">

**Author:** ![imported\_RPS131](https://avatars.discourse-cdn.com/v4/letter/i/dbc845/32.png) [@imported\_RPS131](https://forums.speedlife.net/u/imported_RPS131)\
**Post date:** [January 10, 2007, 1:42pm UTC](https://forums.speedlife.net/t/wtb-rb25-and-ka-driveshafts/145567/3 "2007-01-10T13:42:01Z")

</div>

Well if it’s a 92 240, chances are it’s going to be ABS, no?

---

<div class="post-metadata">

**Author:** ![airceo13](https://avatars.discourse-cdn.com/v4/letter/a/9de0a6/32.png) [@airceo13](https://forums.speedlife.net/u/airceo13)\
**Post date:** [January 10, 2007, 2:20pm UTC](https://forums.speedlife.net/t/wtb-rb25-and-ka-driveshafts/145567/4 "2007-01-10T14:20:21Z")

</div>

yes its abs… is there a difference between the abs equipped and the non abs?

---

<div class="post-metadata">

**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\
**Post date:** [January 10, 2007, 2:32pm UTC](https://forums.speedlife.net/t/wtb-rb25-and-ka-driveshafts/145567/5 "2007-01-10T14:32:17Z")

</div>

> [@airceo13](#):
>
> yes its abs… is there a difference between the abs equipped and the non abs?

the length of the shaft is defferent. but both are usable. the difference is less than 1 inch so the yoke can take that

Also the front section of a 300ZX (yoke) is the same as an RB25. That is all you will need if you are doing an RB25 swap, that i assume

---

<div class="post-metadata">

**Author:** ![airceo13](https://avatars.discourse-cdn.com/v4/letter/a/9de0a6/32.png) [@airceo13](https://forums.speedlife.net/u/airceo13)\
**Post date:** [January 10, 2007, 2:51pm UTC](https://forums.speedlife.net/t/wtb-rb25-and-ka-driveshafts/145567/6 "2007-01-10T14:51:25Z")

</div>

well i found a rb25 yolk already… now i just need the ka driveshaft… it doenst really matter which one as long as i can get the rear part to bolt into the diff… gonna get it custom for a one piece driveshaft for my rb25 s13 swap… so if anybody has a ka driveshaft it would be great thanks

jeff