# WTB: RB26DETT parts **URL:** \ **Category:** Classifieds\ **Created:** [September 10, 2005, 11:27am UTC](https://forums.speedlife.net/t/wtb-rb26dett-parts/88637 "2005-09-10T11:27:43Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![s13.5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13.5/32/5552_2.png) [@s13.5](https://forums.speedlife.net/u/s13.5)\ **Post date:** [September 10, 2005, 11:27am UTC](https://forums.speedlife.net/t/wtb-rb26dett-parts/88637/1 "2005-09-10T11:27:43Z")
**Wanted** : _RB26DETT_ parts aftermarket/ nismo as well as replacement parts also **WANTED** : Companies in Canada that may be able to get me these parts, Websites, phone numbers, emails would be greatly appreciated. Thanks ---
**Author:** ![Fobwall](https://avatars.discourse-cdn.com/v4/letter/f/7ea924/32.png) [@Fobwall](https://forums.speedlife.net/u/Fobwall)\ **Post date:** [September 10, 2005, 11:30am UTC](https://forums.speedlife.net/t/wtb-rb26dett-parts/88637/2 "2005-09-10T11:30:18Z")
wow double post + no intro? gg ---
**Author:** ![s13.5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13.5/32/5552_2.png) [@s13.5](https://forums.speedlife.net/u/s13.5)\ **Post date:** [September 10, 2005, 11:52am UTC](https://forums.speedlife.net/t/wtb-rb26dett-parts/88637/3 "2005-09-10T11:52:07Z")
Got an 1989 240sx HB with an s15 front end conversion just bought an rb26dett to swap into it. and yes i double posted cause i screwed up new to the group man gimme a break ---
**Author:** ![spd-dmn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spd-dmn/32/5513_2.png) [@spd-dmn](https://forums.speedlife.net/u/spd-dmn)\ **Post date:** [September 10, 2005, 11:56am UTC](https://forums.speedlife.net/t/wtb-rb26dett-parts/88637/4 "2005-09-10T11:56:55Z")
Read the rules and post an introduction in the New Users Section. Thanks. ---
**Author:** ![s13.5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13.5/32/5552_2.png) [@s13.5](https://forums.speedlife.net/u/s13.5)\ **Post date:** [September 10, 2005, 2:46pm UTC](https://forums.speedlife.net/t/wtb-rb26dett-parts/88637/5 "2005-09-10T14:46:09Z")
I did after i posted my bad man sorry, but does anyone have any information that might be useful? ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [September 10, 2005, 8:43pm UTC](https://forums.speedlife.net/t/wtb-rb26dett-parts/88637/6 "2005-09-10T20:43:37Z")
call me when you got time, im also doin an rb26 swapp and there are some things you need to know and some things a can help you out with. and i got mad hookups on parts for this swap farmer 905-703-1715 ---
**Author:** ![s13.5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13.5/32/5552_2.png) [@s13.5](https://forums.speedlife.net/u/s13.5)\ **Post date:** [September 11, 2005, 5:41pm UTC](https://forums.speedlife.net/t/wtb-rb26dett-parts/88637/7 "2005-09-11T17:41:13Z")
will do man, preciate it. i worked out most of the kinks but have the motor but in the process of a complete tear down and rebuild, so as i have the funds i’ll be doing the rebuild but everything i kan find is in new zealand, and japan and shit and the price is right but shipping will kill me ---
**Author:** ![s13\_2bar](https://avatars.discourse-cdn.com/v4/letter/s/edb3f5/32.png) [@s13\_2bar](https://forums.speedlife.net/u/s13_2bar)\ **Post date:** [September 14, 2005, 7:33pm UTC](https://forums.speedlife.net/t/wtb-rb26dett-parts/88637/8 "2005-09-14T19:33:17Z")
To the best of my knowledge, I`m one of the very few that has an RB running an s13. If you have any questions - pm me. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [September 14, 2005, 7:42pm UTC](https://forums.speedlife.net/t/wtb-rb26dett-parts/88637/9 "2005-09-14T19:42:26Z")
i would like to see your vehicle, i have all the parts to do my swap, mabye we can get together and dispell a few questions i have about the swap, im planning on starting my swap in two weeks farmer ---
**Author:** ![woz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/woz/32/7605_2.png) [@woz](https://forums.speedlife.net/u/woz)\ **Post date:** [September 14, 2005, 7:48pm UTC](https://forums.speedlife.net/t/wtb-rb26dett-parts/88637/10 "2005-09-14T19:48:28Z")
if you are serious about building a bullet proof motor i know of a full setup rad converted to rhd so steering shaft clears manifold, single turbo, custom oil pan, aem ems, motor is apart but everything is top of the line, heres the list 1991 right hand drive hatchback with r32 RB26det 6 greddy electronic warning gauges garret gt 3040R profec e-01 rb20 trans (yeah, i know) hks type 1 turbo timer plx devices air fuel gauge FLUIDYNE radiator PWR intercooler 3 x 11 x 24 core custom aluminum mandrel IC pipe tial 35mm WG moroso billet rad catch can oil catch can custom painted valve covers (white + black) be cool electric fans 12" and 14" Sweet ass exhaust setup: 3" all mandrel with electronic butterfly dump that emptys behind the front wheel. wastegate dump tube This stuff below is all brand new never ever used with the prices. The motor is in pieces. aem EMS with map sensor 1500 exedy tripple plate clutch 1400 wiseco pistons 650 pauter rods 1100 Tomei Procam (intake) 270 x 10.25 Tomei Procam (exhaust) 270 x 10.25 Tomei Cam Pulley (intake) Tomei Cam Pulley (exhaust) Tomei Head Gasket Combination (1.2 mm thickness) Tomei Solid Lifters HKS valve seals Trust Clear timing cover… N1 water pump OEM Tensioner set (this stuff came to 2256) ferrea valve springs ferrea titanium retainers ferrea valve seats (880) 1000cc injectors (450) power enterprise black metal bearings PE timing belt (650) Jun oil pump Jun main studs Jun extra strong valve guides Jun r32 oil pump drive collar (1200) ARP head studs (250) machine work: bore/hone/port polish/magnaflux/ 5 angle valve job/blast/paint (1800) THE grand total of the new parts alone is over 12000 dollars, and those are low prices not including shipping… I AM NOT WILLING TO PART OUT MY SHIT, DONT ASK. Dont ask me why im selling, or i will punch you in the face… electronically of course. yea, contact me if your interested, make offer ---
**Author:** ![Original\_Nutta](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/original_nutta/32/5474_2.png) [@Original\_Nutta](https://forums.speedlife.net/u/Original_Nutta)\ **Post date:** [September 14, 2005, 8:19pm UTC](https://forums.speedlife.net/t/wtb-rb26dett-parts/88637/11 "2005-09-14T20:19:34Z")
Evan?