# wtb: rollcage for the bimmer....Suggestions??
**URL:** https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210
**Category:** Classifieds
**Created:** [May 10, 2008, 11:49am UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210 "2008-05-10T11:49:48Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@turbociv](https://forums.speedlife.net/u/turbociv)
#### Post date: [May 10, 2008, 11:49am UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/1 "2008-05-10T11:49:48Z")
well, i got booted from the track last night and i dont think ill be able to sneak back in without getting noticed. Apparently theres not alot of bmw’s runnin 11’s. so i need to know of any reasonable shops that do cages. i dont have alotta money and to be honest im not 100% sure i want a cage but on the other hand it is a safer alternative. so, do i need a 6point or can i get away with only a 4pt for the track?
Where are the local cage fabricators?
---
### Author:  [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)
#### Post date: [May 10, 2008, 12:01pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/2 "2008-05-10T12:01:36Z")
4 point roll bar should do ya for a while
which track booted ya ?
---
### Author:  [@psphinx81](https://forums.speedlife.net/u/psphinx81)
#### Post date: [May 10, 2008, 12:03pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/3 "2008-05-10T12:03:15Z")
NYI
PMP does cages
---
### Author:  [@turbociv](https://forums.speedlife.net/u/turbociv)
#### Post date: [May 10, 2008, 12:36pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/4 "2008-05-10T12:36:22Z")
anyone know pmp’s rates for there cages? anyone know what a 4 point is good for time wise?
---
### Author:  [@93dx\_hatch](https://forums.speedlife.net/u/93dx_hatch)
#### Post date: [May 10, 2008, 12:38pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/5 "2008-05-10T12:38:27Z")
$100 per point
---
### Author:  [@turbociv](https://forums.speedlife.net/u/turbociv)
#### Post date: [May 10, 2008, 12:52pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/6 "2008-05-10T12:52:08Z")
> [@93dx--hatch](#):
>
> $100 per point
you sure? that quote was a couple years ago wasnt it?
---
### Author:  [@MPD47](https://forums.speedlife.net/u/MPD47)
#### Post date: [May 10, 2008, 12:53pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/7 "2008-05-10T12:53:36Z")
PMP, fantastic work, he’ll be redoing the botched job on my Porsche.
---
### Author:  [@97FormulaWS-6](https://forums.speedlife.net/u/97FormulaWS-6)
#### Post date: [May 10, 2008, 12:55pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/8 "2008-05-10T12:55:55Z")
4 or 6 is just a Bar, not a cage; VERY LARGE difference.
100/pt is about right for a basic roll-bar.
---
### Author:  [@cky89](https://forums.speedlife.net/u/cky89)
#### Post date: [May 10, 2008, 12:56pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/9 "2008-05-10T12:56:23Z")
> [@turbociv](#):
>
> you sure? that quote was a couple years ago wasnt it?
I believe the main hoop is a bit more than 100, but all the points after that are 100 each. Don’t quote me on that though.
When/If you go 6 point you may want to get a swing out on the passenger side if your wife or kids ever ride shotty.
---
### Author:  [@woz](https://forums.speedlife.net/u/woz)
#### Post date: [May 10, 2008, 12:59pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/10 "2008-05-10T12:59:37Z")
[http://www.vividracing.com/catalog/autopower-4point-streetsport-bolt-in-roll-bar-bmw-e36-m3-9299-p-7891.html](http://www.vividracing.com/catalog/autopower-4point-streetsport-bolt-in-roll-bar-bmw-e36-m3-9299-p-7891.html)
not sure if itll fit a non-m e36, but yeah, quick search turned up that.
---
### Author:  [@97FormulaWS-6](https://forums.speedlife.net/u/97FormulaWS-6)
#### Post date: [May 10, 2008, 1:02pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/11 "2008-05-10T13:02:49Z")
> [@originalsin](#):
>
> [http://www.vividracing.com/catalog/autopower-4point-streetsport-bolt-in-roll-bar-bmw-e36-m3-9299-p-7891.html](http://www.vividracing.com/catalog/autopower-4point-streetsport-bolt-in-roll-bar-bmw-e36-m3-9299-p-7891.html)
>
> not sure if itll fit a non-m e36, but yeah, quick search turned up that.
I’m 99% sure that what he needs to be legal is a minimum of 5 bars (2 mains, 2 rear, and Drivers side front), and it must be welded DOM or Chromoly tubing.
---
### Author:  [@MPD47](https://forums.speedlife.net/u/MPD47)
#### Post date: [May 10, 2008, 1:43pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/12 "2008-05-10T13:43:34Z")
Autopoop cages arent worth a damn if you are looking for actual protection and not just “I need to pass tech”.
---
### Author:  [@Karter](https://forums.speedlife.net/u/Karter)
#### Post date: [May 10, 2008, 1:46pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/13 "2008-05-10T13:46:05Z")
[jegs.com](http://jegs.com)
jegster cages are the best choice, I can’t say this enough.
have it pro isntalled tho.
---
### Author:  [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)
#### Post date: [May 10, 2008, 2:01pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/14 "2008-05-10T14:01:50Z")
so you suggest a generic cage thats cut to fit ? :picard:
---
### Author:  [@turbociv](https://forums.speedlife.net/u/turbociv)
#### Post date: [May 10, 2008, 3:15pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/15 "2008-05-10T15:15:23Z")
see thats the thing. i wanna be safe but if its gunna cost me a fortune for a cage the car will not see the track for a while then. Autopower cages are a great price, but fits like poop and is a bolt in.
---
### Author:  [@91CRXSI](https://forums.speedlife.net/u/91CRXSI)
#### Post date: [May 10, 2008, 3:16pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/16 "2008-05-10T15:16:51Z")
PMP was around $100 a point when i PM’d um at the end of last year. i couldn’t imagine it being much more then that in less then a year.
---
### Author:  [@Nikuk](https://forums.speedlife.net/u/Nikuk)
#### Post date: [May 10, 2008, 3:35pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/17 "2008-05-10T15:35:10Z")
PMP is $100 / pt, and will do a fantastic job of tucking out of the way, as it were. And, having it legal (track)
---
### Author:  [@Nikuk](https://forums.speedlife.net/u/Nikuk)
#### Post date: [May 10, 2008, 3:35pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/18 "2008-05-10T15:35:35Z")
Vitez also does fantastic work overall, but I dunno their prices. The JnJ crew should know tho.
---
### Author:  [@turbociv](https://forums.speedlife.net/u/turbociv)
#### Post date: [May 10, 2008, 3:39pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/19 "2008-05-10T15:39:22Z")
who is pmp? i dont think ive ever heard of them.
---
### Author:  [@Nikuk](https://forums.speedlife.net/u/Nikuk)
#### Post date: [May 10, 2008, 3:51pm UTC](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210/20 "2008-05-10T15:51:33Z")
[Nytrus1](http://nyspeed.com/forums/member.php?u=424)
Sponsor / vendor here.
[http://nyspeed.com/forums/showthread.php?t=27944](http://nyspeed.com/forums/showthread.php?t=27944)
There was a whole lot of drama around for various reasons, but before AND since then, people have gotten real nice cage work done by them.
$0.02
[Next page](https://forums.speedlife.net/t/wtb-rollcage-for-the-bimmer-suggestions/48210.md?page=2)