# WTB:S10 Blazer Rear End **URL:** \ **Category:** Classifieds\ **Created:** [March 19, 2008, 5:37am UTC](https://forums.speedlife.net/t/wtb-s10-blazer-rear-end/196201 "2008-03-19T05:37:20Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![xlogic](https://avatars.discourse-cdn.com/v4/letter/x/59ef9b/32.png) [@xlogic](https://forums.speedlife.net/u/xlogic)\ **Post date:** [March 19, 2008, 5:37am UTC](https://forums.speedlife.net/t/wtb-s10-blazer-rear-end/196201/1 "2008-03-19T05:37:20Z")
My right rear axle is bent…has been for some time…haven’t been driving the truck because of this. Specs on the truck are as follows 1991 S10 Blazer 4X4 2 door 4.3L 5 Speed/3.08 Gears(I Think) Anything that will bolt right up i will buy, if someone has a posi for this thats even better edit:if it matters…drum brakes in the rear…no abs ---
**Author:** ![F-B-A](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/f-b-a/32/6022_2.png) [@F-B-A](https://forums.speedlife.net/u/F-B-A)\ **Post date:** [March 19, 2008, 9:11am UTC](https://forums.speedlife.net/t/wtb-s10-blazer-rear-end/196201/2 "2008-03-19T09:11:16Z")
if you dont get a responce, call me i know where there is a few, did you call brian yet? hes gotta have something ---
**Author:** ![SoLow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/solow/32/6001_2.png) [@SoLow](https://forums.speedlife.net/u/SoLow)\ **Post date:** [March 19, 2008, 10:43am UTC](https://forums.speedlife.net/t/wtb-s10-blazer-rear-end/196201/3 "2008-03-19T10:43:38Z")
we dont have a 4 wheel drive one…but mike what happened to getting one from Marsh’s ? ---
**Author:** ![xlogic](https://avatars.discourse-cdn.com/v4/letter/x/59ef9b/32.png) [@xlogic](https://forums.speedlife.net/u/xlogic)\ **Post date:** [March 19, 2008, 11:04am UTC](https://forums.speedlife.net/t/wtb-s10-blazer-rear-end/196201/4 "2008-03-19T11:04:49Z")
> [@All you mofo's that wear baggy pants.......](https://forums.speedlife.net/t/all-you-mofos-that-wear-baggy-pants/35525/49): > > we dont have a 4 wheel drive one…but mike what happened to getting one from Marsh’s ? After i got the truck home i did what brian said and got in touch with larry(through shawn of course) and he said that if i drove the truck that far on a bent axle that there are probably a few other things with the rear end that are screwed up, the quote brian had gotten me was for the right rear axle + install Edit: and then there is the problem of getting the truck back out mt pleasant from the ghetto. Guff you’d probably be able to answer this one(if not i’m sure brian could)…exactly which rear ends can be taken off of a different vehicle and end up fitting mine ---
**Author:** ![SoLow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/solow/32/6001_2.png) [@SoLow](https://forums.speedlife.net/u/SoLow)\ **Post date:** [March 19, 2008, 11:23am UTC](https://forums.speedlife.net/t/wtb-s10-blazer-rear-end/196201/5 "2008-03-19T11:23:00Z")
> [@Teaser 240sx pics](https://forums.speedlife.net/t/teaser-240sx-pics/35505/33): > > After i got the truck home i did what brian said and got in touch with larry(through shawn of course) and he said that if i drove the truck that far on a bent axle that there are probably a few other things with the rear end that are screwed up, the quote brian had gotten me was for the right rear axle + install > > Edit: and then there is the problem of getting the truck back out mt pleasant from the ghetto. > Guff you’d probably be able to answer this one(if not i’m sure brian could)…exactly which rear ends can be taken off of a different vehicle and end up fitting mine Marsh’s prob have a complete rear that will work for you… you’ll need a 4x4 rear…a 2wd rear would work but it is narrower then the 4x4 rears…u would need spacers ---
**Author:** ![SoLow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/solow/32/6001_2.png) [@SoLow](https://forums.speedlife.net/u/SoLow)\ **Post date:** [March 19, 2008, 2:23pm UTC](https://forums.speedlife.net/t/wtb-s10-blazer-rear-end/196201/6 "2008-03-19T14:23:48Z")
if you want to run a 2wd rear…we have have one…$100.00 ---
**Author:** ![S10Blazed\_Si](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s10blazed_si/32/5983_2.png) [@S10Blazed\_Si](https://forums.speedlife.net/u/S10Blazed_Si)\ **Post date:** [March 19, 2008, 2:24pm UTC](https://forums.speedlife.net/t/wtb-s10-blazer-rear-end/196201/7 "2008-03-19T14:24:36Z")
[http://www.pittspeed.com/forums/showthread.php?t=42592](http://www.pittspeed.com/forums/showthread.php?t=42592) ---
**Author:** ![xlogic](https://avatars.discourse-cdn.com/v4/letter/x/59ef9b/32.png) [@xlogic](https://forums.speedlife.net/u/xlogic)\ **Post date:** [March 19, 2008, 5:52pm UTC](https://forums.speedlife.net/t/wtb-s10-blazer-rear-end/196201/8 "2008-03-19T17:52:30Z")
> [@Recommend some good OEM seats](https://forums.speedlife.net/t/recommend-some-good-oem-seats/35514/18): > > if you want to run a 2wd rear…we have have one…$100.00 gear ratio? posi? and about those spacers…best place to get them > [@FS: 4 green and chrome indoor outdoor ANYWHERE chairs](https://forums.speedlife.net/t/fs-4-green-and-chrome-indoor-outdoor-anywhere-chairs/35451/4): > > [http://www.pittspeed.com/forums/showthread.php?t=42592](http://www.pittspeed.com/forums/showthread.php?t=42592) i looked but i kind of shy’d away from it…i don’t think the rear ends are the same…anybody know for sure ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [March 20, 2008, 5:00am UTC](https://forums.speedlife.net/t/wtb-s10-blazer-rear-end/196201/9 "2008-03-20T05:00:42Z")
> [@Recommend some good OEM seats](https://forums.speedlife.net/t/recommend-some-good-oem-seats/35514/18): > > if you want to run a 2wd rear…we have have one…$100.00 just run 2wd rear wheels,its 3:08 open,if i have 2wd wheel 25 for the pair > [@FS: 4 green and chrome indoor outdoor ANYWHERE chairs](https://forums.speedlife.net/t/fs-4-green-and-chrome-indoor-outdoor-anywhere-chairs/35451/4): > > [http://www.pittspeed.com/forums/showthread.php?t=42592](http://www.pittspeed.com/forums/showthread.php?t=42592) if gear ratio is the same,it will work,check code in glove box gu4=3:08’s g80=posi > [@Ignore - No Longer For Sale](https://forums.speedlife.net/t/ignore-no-longer-for-sale/35372/5): > > gear ratio? posi? and about those spacers…best place to get them > > i looked but i kind of shy’d away from it…i don’t think the rear ends are the same…anybody know for sure if gear ratio is the same,it will work,check code in glove box gu4=3:08’s g80=posi ---
**Author:** ![xlogic](https://avatars.discourse-cdn.com/v4/letter/x/59ef9b/32.png) [@xlogic](https://forums.speedlife.net/u/xlogic)\ **Post date:** [March 20, 2008, 10:39am UTC](https://forums.speedlife.net/t/wtb-s10-blazer-rear-end/196201/10 "2008-03-20T10:39:43Z")
waiting to hear from chaz and his bro on the status of the rear end on the s10 being parted…all else fails i’m goin to jj’s for sure