# WTB: S13(180SX) parts incl. bodykit **URL:** \ **Category:** Classifieds\ **Created:** [December 15, 2008, 9:02pm UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601 "2008-12-15T21:02:59Z")\ **Posts on this page:** 16\ **Page:** 2
**Author:** ![Keez](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/keez/32/5570_2.png) [@Keez](https://forums.speedlife.net/u/Keez)\ **Post date:** [January 7, 2009, 12:07am UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/21 "2009-01-07T00:07:21Z")
cal im not sure about that, peters silvia came with stock side skirts, they appear to be a lot different then 180sx sides ---
**Author:** ![RED\_LINE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/red_line/32/5656_2.png) [@RED\_LINE](https://forums.speedlife.net/u/RED_LINE)\ **Post date:** [January 7, 2009, 12:27am UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/22 "2009-01-07T00:27:12Z")
> [@On another topic](https://forums.speedlife.net/t/19791/14): > > Actually, silvia side skirts and 180 side skirts are the exact same. I think you’re mixing it up with the USDM oem ones that run flat on the bottom from front to back. both silvia and 180s flare out at the ends. you need to double check that Cal-Soy ---
**Author:** ![Cal-SoY](https://avatars.discourse-cdn.com/v4/letter/c/91b2a8/32.png) [@Cal-SoY](https://forums.speedlife.net/u/Cal-SoY)\ **Post date:** [January 7, 2009, 12:30am UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/23 "2009-01-07T00:30:57Z")
I’m looking for a picture right now, but this has been discussed a couple times on here and the last verdict we had was that jdm silvia and 180sx sides were the same and usdm skirts were the ones with the flat bottom. ---
**Author:** ![Cal-SoY](https://avatars.discourse-cdn.com/v4/letter/c/91b2a8/32.png) [@Cal-SoY](https://forums.speedlife.net/u/Cal-SoY)\ **Post date:** [January 7, 2009, 12:40am UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/24 "2009-01-07T00:40:14Z")
Silvia sides: The silvia skirts tend to flare out just like the 180s, as you can see here, not very clear but it looks flared to me. ![http://www.driftingstreet.com/images/nissan-silvia-ps13.jpg](http://www.driftingstreet.com/images/nissan-silvia-ps13.jpg) ![http://i211.photobucket.com/albums/bb251/Cal-Soy/n50109314311288269164nz7.jpg](http://i211.photobucket.com/albums/bb251/Cal-Soy/n50109314311288269164nz7.jpg) I just looked at a picture of peter’s car and i think peter’s skirts are usdm, i could be wrong though. AFter a bit of google, i’ve pulled pics of silvias with both flat bottom and flared skirts so its kind of unclear at the moment. ---
**Author:** ![Sempre\_5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sempre_5/32/5701_2.png) [@Sempre\_5](https://forums.speedlife.net/u/Sempre_5)\ **Post date:** [January 7, 2009, 8:36am UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/25 "2009-01-07T08:36:06Z")
180SX Chuki: [http://www.importforums.com/180sx/images/nissan180sx.jpg](http://www.importforums.com/180sx/images/nissan180sx.jpg) 180SX Kouki: [http://www.japan-car.jp/nissan/180sx/180sx011.jpg](http://www.japan-car.jp/nissan/180sx/180sx011.jpg) Silvia: [http://www.rhdimports.ca/images/s13-001.jpg](http://www.rhdimports.ca/images/s13-001.jpg) .: 180SX Kouki and Chuki are different from Silvia. Kouki is the flared, and Silvia is more straightedge. And Chuki is well um USDM crap we all know. I have seen a handful of cars sporting the Silvia sides and it does look nice and clean. Hope this clears up the questions. Anyways, I’m still lookin for parts…take a hike already winter! DAMNIT ---
**Author:** ![Cal-SoY](https://avatars.discourse-cdn.com/v4/letter/c/91b2a8/32.png) [@Cal-SoY](https://forums.speedlife.net/u/Cal-SoY)\ **Post date:** [January 7, 2009, 11:17am UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/26 "2009-01-07T11:17:51Z")
Dont mean to rain on your parade but your 180sx Chuki is definetely not right. What we need are pictures of stock cars instead of all these modified ones from import forums and such. Anyways good luck with your project. ---
**Author:** ![Sempre\_5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sempre_5/32/5701_2.png) [@Sempre\_5](https://forums.speedlife.net/u/Sempre_5)\ **Post date:** [January 7, 2009, 10:14pm UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/27 "2009-01-07T22:14:45Z")
> [@How many of you own/have owned a car that is/was older than you?](https://forums.speedlife.net/t/how-many-of-you-own-have-owned-a-car-that-is-was-older-than-you/19774/50): > > Dont mean to rain on your parade but your 180sx Chuki is definetely not right. What we need are pictures of stock cars instead of all these modified ones from import forums and such. > > Anyways good luck with your project. Ain’t rainin on my parade. Just grabbed the “stockiest” pics I could find (these are unmodified). I’d check further into it Cal Thx tho 🙂 ---
**Author:** ![Pants](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pants/32/5590_2.png) [@Pants](https://forums.speedlife.net/u/Pants)\ **Post date:** [January 8, 2009, 5:43am UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/28 "2009-01-08T05:43:45Z")
mine are oem silvia skirts all the silvias u see with flared out skirts have 180 skirts on them ---
**Author:** ![Sempre\_5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sempre_5/32/5701_2.png) [@Sempre\_5](https://forums.speedlife.net/u/Sempre_5)\ **Post date:** [January 14, 2009, 11:41am UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/29 "2009-01-14T11:41:43Z")
Bump S13 - 240SX -1993 headliner (does not need maplights, but does req. domelight) -1990 hatch linings -1991-93 VLSD -dash bezel -console trim (around ashtray) -cigarette lighter assembly -1991-93 DOHC power steering assembly S13 - 180SX -rear quarter windows (180SX badged) -kouki taillights -folding mirrors Z32 - 300ZX -rear calipers AFTERMARKET -a “good” HID kit (must be bipolar hi/low) -bodykit (Kouki set, or Origin Stylish) Please feel free to PM or email me ([sempre5@hotmail.com](mailto:sempre5@hotmail.com)). I’m in great need of these parts and appreciate any offer (though I may not be reluctant to accept 100% of the time). I’m not a low-baller but I am seeking a deal if available. ---
**Author:** ![Sempre\_5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sempre_5/32/5701_2.png) [@Sempre\_5](https://forums.speedlife.net/u/Sempre_5)\ **Post date:** [January 14, 2009, 11:52am UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/30 "2009-01-14T11:52:43Z")
really need a mint headliner and also added: -headlight motors with housing for headlamp (only 1 housing needed) -license plate lamp (mine has rusted right through…I need a mint one) ---
**Author:** ![SpHiNxXx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sphinxxx/32/5659_2.png) [@SpHiNxXx](https://forums.speedlife.net/u/SpHiNxXx)\ **Post date:** [January 20, 2009, 8:40am UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/31 "2009-01-20T08:40:29Z")
hey still interested in the kouki tailz if not im gonna be selling them with the car soon… ive also got a set of folding mirrors let me know! ---
**Author:** ![Sempre\_5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sempre_5/32/5701_2.png) [@Sempre\_5](https://forums.speedlife.net/u/Sempre_5)\ **Post date:** [January 25, 2009, 2:14pm UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/32 "2009-01-25T14:14:37Z")
BUMP ADDED: G45 90mm throttle body SR20DET manifold (intake and exhaust both needed) z32 (N62) MAF ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [January 25, 2009, 5:20pm UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/33 "2009-01-25T17:20:50Z")
i have intake manifolds coming in… do you want stock ones or aftermarket? i have a stock SR exhuast manifold… could get any other aftermarket one as well if you wanna go with something else ---
**Author:** ![Adam\_s13](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@Adam\_s13](https://forums.speedlife.net/u/Adam_s13)\ **Post date:** [January 31, 2009, 8:11pm UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/34 "2009-01-31T20:11:09Z")
I have Q45 90mm throttle body, check it out here --\>[http://www.son240sx.org/forums/showthread.php?t=38573](http://www.son240sx.org/forums/showthread.php?t=38573) ---
**Author:** ![polak240sx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/polak240sx/32/5683_2.png) [@polak240sx](https://forums.speedlife.net/u/polak240sx)\ **Post date:** [January 31, 2009, 9:20pm UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/35 "2009-01-31T21:20:52Z")
I voted AAS bloodline… because no one else did. ---
**Author:** ![Sempre\_5](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sempre_5/32/5701_2.png) [@Sempre\_5](https://forums.speedlife.net/u/Sempre_5)\ **Post date:** [February 9, 2009, 11:12am UTC](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601/36 "2009-02-09T11:12:16Z")
Haha, the bloodline, IMO, is actually attractive; nice big opening for the rad, and use the OEM signals, and overall a clean look…would look pretty sweet with chuki signals. the bumper is the only iffy piece; not very contoured a lil chunky BUMP no longer needed: heater hose set [Previous page](https://forums.speedlife.net/t/wtb-s13-180sx-parts-incl-bodykit/120601.md?page=1)